Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 3

Products

Classic Truck

Shop 1960-72 Chevy Truck At Speedway Motors

The Chevrolet C/K series of pickups (C meaning two-wheel drive and K meaning four-wheel drive) first two generations featured a new drop-center ladder frame. This truck was more than just a work horse, it was and still is a true classic. From lowering kits to gauge assemblies, we've got the performance parts for your classic Chevy truck you'll love at prices you'll love even more.

Filter

"Classic Truck, 1960-72 Chevy Truck" Page 1 of 3

Page 1 of 3

All

New

Garage Sale

  • 1965-72 Chevy Pickup Rear Lowering Kit
    1965-72 Chevy Pickup Rear Lowering Kit
    (Part #91006575)
    x
                

    This kit does it all! It lowers your truck 5", Corrects the shock angle so shocks work correctly, AND centers the rear axle. (All this is recommended when lowering 5" or more.) Includes 5" drop springs and shocks, deluxe trac bar, hardware and shock relocation kit.

    Note: C-notch required. Coils come black powder coated. 

  • 1964-66 Chevy Pickup Switch Panel Cover
    1964-66 Chevy Pickup Switch Panel Cover
    (Part #91023664)
    x
                

    These billet aluminum switch panel covers are made to fit your 1964-1966 Chevy pickup truck dash.  They are designed to fit in place of your switches for a new styled sleek look.

    • Billet aluminum
    • 1964-1966 Chevy Pickup
    • Switch eliminator panel
  • 1960-72 Chevy Pickup Rear Lowering Block Kit, 2 Inch
    1960-72 Chevy Pickup Rear Lowering Block Kit, 2 Inch
    (Part #91000042)
    x
                This is an easy and inexpensive way to lower your truck without affecting ride quality. Kits include aluminum blocks and new u-bolts.
            
  • Heater Core for 1967-72 GM C/K Series Truck and Blazer
    Heater Core for 1967-72 GM C/K Series Truck and Blazer
    (Part #910399067)
    x
                For your 1967-72 GM C/K Series Truck, use a 100% new heater core,    not a marginal   recore like others sell. All heater cores are a    direct fit  factory replacement for applications without A/C. 
    • All new construction
    • Direct fit factory replacement for 1967-72 GM C/K Series truck, Blazer, and Jimmy
    • Please note: non air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock. 

  • 1971-72 Chevy Pickup Front End Rebuild Kit
    1971-72 Chevy Pickup Front End Rebuild Kit
    (Part #91007172)
    x
                Want to make your truck handle like new? Installing one of our complete front end rebuild kits will help. These kits include upper and lower ball joints, inner and outer tie rod ends, tie rod adjusting sleeves, an idler arm and a poly sway bar bushing kit. Kit contents may vary.
            
  • 1963-1966 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    1963-1966 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    (Part #91006366)
    x
                

    This kit allows you to upgrade your 1963-1966 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.

    Kit includes 11" rotors, GM Midsize calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, banjo bolts, brake hoses, 9" single diaphragm brake booster, master cylinder, disc/drum proportioning valve, and mounting hardware.

    Only for 1/2 ton trucks 

  • 1963-72 Chevy Pickup Rear Shock Relocation Kit
    1963-72 Chevy Pickup Rear Shock Relocation Kit
    (Part #9106372)
    x
                

    Designed for 1963-72 Chevy trucks that have been lowered more than 3" in the rear. Our kit will mount the shocks at the correct angle allowing for more shock travel and a smoother ride.

    Note: Will not work with leaf springs suspension. 

  • 1970 Chevy Truck 5-Lug Rear Axle Conversion Kit
    1970 Chevy Truck 5-Lug Rear Axle Conversion Kit
    (Part #91000070)
    x
                

    If you've upgraded your truck's front end to late model 5 -lug on 5" Chevrolet truck bolt circle disc brakes, now is the time to upgrade your rear end. With the availability of 5-lug trailing arm rear ends quickly drying up, we now offer 5-lug axles that will install into your 6-lug rear end. Our axles come pre-drilled with a 5-lug on 5" Chevrolet truck bolt circle and fit 1970 rear ends. The axles accept 1971-72 truck drums and use the existing brake hardware. Available as a complete kit with axles, wheel studs and new brake drums or the use of the spider gear set. Will not work with 1960-62 trucks.

    Note: Factory 6-lug applications had 7/16" diameter studs and 5 on 5-lug kits have 1/2" diameter studs. 

  • 1963-70 Chevy Pickup Front Disc Brake Bracket Kit
    1963-70 Chevy Pickup Front Disc Brake Bracket Kit
    (Part #91063701)
    x
                

    This kit allows you to upgrade your 1963-70 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you wanted custom 5-lug wheels on your truck anyways, right?

    The kit will make use of 1969-72 Chevelle rotors & 1969-77 Camaro calipers.

    Use Speedway Outer Wheel Bearing #912TLM11949 (not included).

  • 1963-72 Chevy Pickup Front Lowering Coil Springs, 3 Inch Drop
    1963-72 Chevy Pickup Front Lowering Coil Springs, 3 Inch Drop
    (Part #91006103)
    x
                Replace your worn out springs and lower your truck at the same time with these lowering springs. These springs offer modest lowering and proper spring rate for both S/B and B/B six-cylinder and V8 pickups.
            
  • 1967-70 Chevy Pickup Front End Rebuild Kit
    1967-70 Chevy Pickup Front End Rebuild Kit
    (Part #91006770)
    x
                Want to make your truck handle like new? Installing one of our complete front end rebuild kits will help. These kits include upper and lower ball joints, inner and outer tie rod ends, tie rod adjusting sleeves, an idler arm and a poly sway bar bushing kit. Kit contents may vary.
            
  • 1960-72 Chevy Pickup Rear Lowering Block Kit, 1-1/2 Inch
    1960-72 Chevy Pickup Rear Lowering Block Kit, 1-1/2 Inch
    (Part #91000450)
    x
                This is an easy and inexpensive way to lower your truck without affecting ride quality. Kits include aluminum blocks and new u-bolts.
            
  • Bolt-In 9 Inch Ford Rear Housing for 1967-72 GM Pickup Trucks
    Bolt-In 9 Inch Ford Rear Housing for 1967-72 GM Pickup Trucks
    (Part #91046118)
    x
                Add the strength and interchangability of a 9" Ford to your classic truck with these quality housings! No modifications necessary, just bolt the housing straight to the original arms.
    • Bolts onto original trailing arms in stock location
    • 62" width axle face to axle face
    • Housing is a 62" Centered Pinion
    • Custom axles available
  • 1964-66 Chevy Pickup Billet Glove Box Cover
    1964-66 Chevy Pickup Billet Glove Box Cover
    (Part #91022664)
    x
                Billet aluminum glove box cover for 1964-1966 Chevy pickup trucks. Machined from 1/8" thick aluminum and mounts onto the glove box door using glue or tape.
            
  • Classic Instruments Gauge Set Dash Assembly, 1967-72 Chevy Pickup
    Classic Instruments Gauge Set Dash Assembly, 1967-72 Chevy Pickup
    (Part #2751012)
    x
                CT Classic package gauge sets are classic gauges  are handcrafted for your 1967-72 Chevy truck. Classic Instruments CT  Classic gauge sets can give your interior the look that you want.  Stylish gauges are set inside of reproduction housings that include a  wiring harness and mounting hardware. Turn signals and high-beam  indicator are also included. Keep the look authentic, but add the  precision of modern built-in-the-USA technology with CT Classic package  gauge sets from Classic Instruments--the perfect finishing touch! 
    • Black "Velocity" face design - Blk
    • Black & Green "G-Stock" face design - Gstk
    • For 67-72 GM truck
    • Set includes all 7 gauges pre assemblied in bracketry, pre wired, high beam indicator in speedometer
    • New 69-72 style (w/o manual choke hole) reproduction bezel included
    • Standard GM sender pack included
    • Fuel level gauge pre-programed 0-90 ohm to allow stock fuel tank sender to be used
    • No fuel sender included.

    Classic Instruments Installation Manual (PDF)

  • 1960-72 Chevy Pickup Rear End Conversion Kit
    1960-72 Chevy Pickup Rear End Conversion Kit
    (Part #91006072)
    x
                This kit is desgined for installing a new rear axle in your 1960-72 Chevy pickup (1/2-ton, coil-spring suspension only.) Requires minimal welding. Kit includes axle brackets & adjustable trac-bar.
            
  • GM Aluminum Woodgrain Steering Wheel Horn Button, 9 Bolt
    GM Aluminum Woodgrain Steering Wheel Horn Button, 9 Bolt
    (Part #9115500)
    x
                These billet aluminum horn buttons are designed for use with 1967-1994 GM car and pickup factory steering columns.  They simply press into the steering wheel adapter.
    • Plated billet aluminum steering wheel horn button fits our 9 billet bolt steering wheel setups
    • Presses into steering wheel adapter
    • Wood grain hydrographic design, smooth finish
    • Mounting pattern: 9 hole. Diameter: 4-5/8"
  • 1967-1972 Chevy Truck 3-Gauge Panel
    1967-1972 Chevy Truck 3-Gauge Panel
    (Part #9100367)
    x
                

    Give the dash of your 1967-72 Chevy or GMC truck a clean, custom look with this polished billet aluminum gauge panel. The gauge panel bolts into your original dash and accepts a 5 inch speedometer and 5 inch quad gauge, with a 3-3/8 inch tachometer in between. (Gauges sold separately.)

    Matching glove box lid 9101667 sold separately.

  • Classic Instruments CT67VSW Velocity Series White Gauge Set, 1967-72 Chevy
    New
    Classic Instruments CT67VSW Velocity Series White Gauge Set, 1967-72 Chevy
    (Part #2751051)
    x
                Please view the product's page for more information
            
  • 1967-1972 Chevy Truck Glove Box Lid
    1967-1972 Chevy Truck Glove Box Lid
    (Part #9101667)
    x
                

    Give the dash of your 1967-72 Chevy or GMC truck a clean, custom look with this polished billet aluminum glove box lid. The glove box lid is the perfect complement to gauge panel 9100367, with a matching ball-milled design and brilliant polished finish.

Goto Previous PagePrevious Page
1 2 3