Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop 1947-54 Chevy Truck AT Speedway Motors

The Advance Design series (1947-55) was billed as a bigger, stronger and sleeker design which helped make these beauties the best selling truck in the country in their day. Speedway Motors carries a huge selection of parts for your Chevy truck including wiring harnesses, tail lights and just about all the bolt in frame components you'll need to get your truck out of the garage and on the road.

"Classic Truck, 1947-54 Chevy Truck" Page 1 of 3

All

New

Garage Sale

  • Classic Instruments 1947-53 Chevy Pickup White Gauge Set
    Classic Instruments 1947-53 Chevy Pickup White Gauge Set
    (Part #275602)
    x
                

    Classic Instruments built this package to easily replace the gauges in your '47-'53 Chevy pickup. The gauges have a 140 mph electric speedometer, voltmeter, oil pressure, water temperature and fuel level. The fuel level gauge works with your stock '47-'53 Chevy 0-30 ohm sending unit. All other sending units are included.

     

    Classic Instruments Installation Manual (PDF)

  • Bolt-In 1947-54 Chevy Pickup Mustang II Crossmember
    Bolt-In 1947-54 Chevy Pickup Mustang II Crossmember
    (Part #91044754)
    x
                

    Our bolt-in Mustang II suspension kit for 1947-1954 Chevy half-ton and 3/4 ton pickups includes all hardware and instructions. 

    • Completely bolt in - no welding required
    • Based on proven Mustang II geometry
    • Complete with bolt in boxing plates to reinforce the frame
    • Interlocking design for ultimate strength
    • Threaded adjusters to fine tune ride height
    • Full lower A-arms required with this crossmember (strutless type)
    • Requires the use of a power rack and pinion and tubular control arms
    • NOT for use with air ride

    910-44754 Instructions (PDF)

    Note:  Use bolt-in motor mount kit 910-54754 to mount your S/B Chevy.
  • TCI 1937-1953 1/2 Ton Chevy Pickup Rear Leaf Spring Kit, 3100 Series
    TCI 1937-1953 1/2 Ton Chevy Pickup Rear Leaf Spring Kit, 3100 Series
    (Part #91043237)
    x
                

    Improve the ride, handling and stance of your classic truck with a new rear leaf spring kit. These kits are desgined to lower your truck 4-inches from stock and provide a smoother ride. Spring hangers and shock crossmember bolt on; axle pads are weld-on. Kits include leaf springs, brackets, shock kit, mounting and instructions.

    Chevy Pickup Rear Leaf Spring Installation Instructions (PDF)

  • BedWood Extruded Aluminum Bed Strip Set for 1954-55 Chevy 3600 LWB
    BedWood Extruded Aluminum Bed Strip Set for 1954-55 Chevy 3600 LWB
    (Part #1682201)
    x
                

    These BedStrips™ with hidden fasteners are extruded aluminum, show polished, bright anodized, trimmed to length for your particular application, and ready to install into the stock grooves. Includes stainless hidden fasteners. Made in the USA.

    • Designed for use with bed wood kits for 1954-55 Chevy 3600 LWB stepside pickups 
    • Choose between "Speed-bump" or "Flat-top" style strip kits
    • Includes hidden fasteners
    • Extruded aluminum
    • Made in U.S.A.
  • Classic Instruments CT54AN52 1954-55 Chevy Pickup All-American Nickel Gauge Set
    New
    Classic Instruments CT54AN52 1954-55 Chevy Pickup All-American Nickel Gauge Set
    (Part #2751046)
    x
                Please view the product's page for more information
            
  • Posies Super Slide Springs D441 47-54 Chevy/GM Pickup Front Springs
    Posies Super Slide Springs D441 47-54 Chevy/GM Pickup Front Springs
    (Part #580441)
    x
                

    These Dual-Flex front springs by Posies lower your classic Chevy 1/2-ton pickup 3" more than a set of new replacement springs. The unique 2-leaf tapered design offers a better ride and provides a 100% increase in safety over mono-leaf springs.

    Includes new U-bolts for easy installation. Shackle and spring bolts sold separately.

    Note: If used in conjunction with a dropped front axle, you may encounter bump steer and tie rod issues.

  • 47-54 GM PU TILT/SHIFT CHR
    $859.99
    47-54 GM PU TILT/SHIFT CHR
    (Part #4463652)
    x
                Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our coupler 446-5249.
            
  • 1947-54 Chevy/GMC Pickup Dropped Axle
    1947-54 Chevy/GMC Pickup Dropped Axle
    (Part #9104754)
    x
                

    Our 3" dropped axle for your classic '47-'54 Chevy half-ton pick-up will get the front end down where you want it. The center portion of the axle is made of 2" DOM tubing while the ends are CNC milled for solid steel. These axles give you 3" of drop.

    The Chevy axles require the steering arm to be modified to accept rod ends or tie rods. U-bolts sold separately.

    • King pin to king pin centers = 50.5"
    • 6" drop measured from spring pad to spindle boss center
    • Axle accepts a 1-3/4" wide spring
    • Spring pad center-to-center = 26.75"
    • Center to center of u-bolt holes is 2.30" side to side
    • Center to center of u-bolt holes front to rear is 3.195"
    • Spring pad width is 29.072" center to center of the outer U-bolt holes
    • Axle Kingpin Boss Height:  2-7/16" (2.438")
    • Axle will provide a camber reading of -1.5 degrees
  • BedWood Wood Kit for 1947-51 Chevy 3600 LWB Stepside Pickup
    BedWood Wood Kit for 1947-51 Chevy 3600 LWB Stepside Pickup
    (Part #1681011401)
    x
                

    These premier show quality BedWood kits are precision milled to 3/4" thick, properly grooved, trimmed to length, sanded and ready to finish! Made in Kentucky, U.S.A. 

    • Bed Wood - Non-Drilled
    • Designed for 1947-51 Chevy 3600 LWB Stepside
    • Made in Kentucky, U.S.A.
    • Choice of Red Oak, White Oak, or Walnut
    • Precision milled to 3/4" thick
    • Bed Size: 85-13/16" Length x 50" Width
    • Board Qty: 9
    • Bed Strip Qty Needed: 8

    Be sure to add your choice of two styles of extruded aluminum strip kits (includes hidden fasteners).

  • Classic Instruments MTBRGMK 1947-53 GM Pickup Truck Gauge Mounts
    Classic Instruments MTBRGMK 1947-53 GM Pickup Truck Gauge Mounts
    (Part #275476)
    x
                

    These mounting brackets from Classic Instruments are replacement for 1947-53 Chevy and GMC pickup truck gauges.

    • 1947-53 GM truck
    • Sold as a set
  • 1940-1953 Chevy Truck LED Tail Lights
    1940-1953 Chevy Truck LED Tail Lights
    (Part #91137013)
    x
                

    These 12 volt LED tail lights fit most 1940-1953 Chevrolet trucks that use two staggered bolts on the rear for mounting. A total of 45 super bright red LED's mount in a stainless steel housing.

    • Polycarbonate Lens
    • The left drivers side taillight has a license plate 6 LED light.
    • The right passenger side taillight does not have a license plate light.


    Note: A LED flasher is only required when all the lights on the vehicle are LED.

    1940-1953 Chevy Truck Tail Light Installation Instructions (pdf)

  • Walker Z-520-1 1947-1953 Chevy Pickup Radiator w/o A/C Condenser
    Walker Z-520-1 1947-1953 Chevy Pickup Radiator w/o A/C Condenser
    (Part #820Z5201)
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Simple bolt-in install
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Top Inlet:  Center (1-1/2")
    • Bottom Outlet:  Right (1-3/4")
    • Oil Cooler Fittings:  1/8" pipe thread
    • Condenser Fittings:  #6 and #8 O-ring design
    • Condenser Refrigerant:  R-12 or R-134a

    Chevy Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • BedWood 1011301262 WD 47-51 1ST CHV 3100 LWB
    BedWood 1011301262 WD 47-51 1ST CHV 3100 LWB
    (Part #1681011301)
    x
                

    These premier show quality BedWood kits are precision milled to 3/4" thick, properly grooved, trimmed to length, sanded and ready to finish! Made in Kentucky, U.S.A. 

    • Bed Wood - Non-Drilled
    • Designed for 1947-51 First Series Chevy 3100 LWB Stepside
    • Made in Kentucky, U.S.A.
    • Choice of Red Oak, White Oak, or Walnut
    • Precision milled to 3/4" thick
    • Bed Size: 85-13/16" Length x 50" Width
    • Board Qty: 9
    • Bed Strip Qty Needed: 8

    Be sure to add your choice of two styles of extruded aluminum strip kits (includes hidden fasteners).

  • Classic Instruments BZ4753 1947-53 GM Pickup 5 Inch Chrome Gauge Bezel
    Classic Instruments BZ4753 1947-53 GM Pickup 5 Inch Chrome Gauge Bezel
    (Part #275475)
    x
                

    These chrome trim bezels from Classic Instruments are replacement for 1947-53 Chevy and GMC pickup truck gauges.

    • Chrome
    • 1947-53 GM truck
    • For 5" gauge size
    • Sold each
  • Basic Disc Brake Kit 1947-1959 Chevy Half Ton Pickup
    Basic Disc Brake Kit 1947-1959 Chevy Half Ton Pickup
    (Part #91631981)
    x
                

    Convert your straight axle truck to disc brakes with our bolt-on disc brake bracket kit. Kit is a true bolt-on using the factory holes on the 1/2 ton spindle. Kit includes caliper brackets, bearing adapters and mounting hardware.

    • Increases track width 7/16" per side, 7/8" total
    • Works with 15" or larger wheels
    • Works with 5 on 4-3/4 Inch bolt patterns

    Chevy Half Ton Pickup Brake Kit Installation Instructions (PDF)

  • Rear Fuel Tank Brace for 1947-54 Chevy Pickup Truck
    Rear Fuel Tank Brace for 1947-54 Chevy Pickup Truck
    (Part #91084754)
    x
                

    Build a firm foundation for your vintage Chevy pickup without picking up a welder! This innovative line of chassis components from Speedway Motors allows the do-it-yourself rodder to assemble a frame using only basic hand tools and a drill.

    • Bolt in
    • Provides extra mounting options for fuel tank and exhaust

    910-84754 Instructions (PDF)

  • WD 51-53 Chevy 3600 LWB
    From: $399.99
    WD 51-53 Chevy 3600 LWB
    (Part #1681011801)
    x
                

    These premier show quality BedWood kits are precision milled to 3/4" thick, properly grooved, trimmed to length, sanded and ready to finish! Made in Kentucky, U.S.A. 

    • Bed Wood - Non-Drilled
    • Designed for 1951-53 Chevy 3600 LWB Stepside
    • Made in Kentucky, U.S.A.
    • Choice of Red Oak, White Oak, or Walnut
    • Precision milled to 3/4" thick
    • Bed Size: 85-13/16" Length x 50" Width
    • Board Qty: 8
    • Bed Strip Qty Needed: 7

    Be sure to add your choice of two styles of extruded aluminum strip kits (includes hidden fasteners).

  • BedWood Extruded Aluminum Bed Strip Set for 1947-51 Chevy 3600 LWB
    BedWood Extruded Aluminum Bed Strip Set for 1947-51 Chevy 3600 LWB
    (Part #1681401)
    x
                

    These BedStrips™ with hidden fasteners are extruded aluminum, show polished, bright anodized, trimmed to length for your particular application, and ready to install into the stock grooves. Includes stainless hidden fasteners. Made in the USA.

    • Designed for use with bed wood kits for 1947-51 Chevy 3600 LWB stepside pickups 
    • Choose between "Speed-bump" or "Flat-top" style strip kits
    • Includes hidden fasteners
    • Extruded aluminum
    • Made in U.S.A.
  • Posies Super Slide Springs 440 47-54 Chevy/GMC Pickup Rear Springs
    Posies Super Slide Springs 440 47-54 Chevy/GMC Pickup Rear Springs
    (Part #580440)
    x
                

    These multi-leaf rear springs by Posies lower your classic Chevy 3100 1/2-ton pickup 3" more than a set of stock replacement springs. Super Slide springs incorporate moly-nylon buttons that reside in die-formed pockets at the tips of the spring leave. Replace your 50 year old stock springs with these new, computer-designed leaf springs for a much smoother ride.

    Factory spec spring eye bushings come with springs. Shackles, shackle bolts and U-bolts sold seperately. 

  • Speedway 1947-54 Chevy Half-Ton Axle U-Bolt
    Speedway 1947-54 Chevy Half-Ton Axle U-Bolt
    (Part #91633027)
    x
                

    Anytime you remove a leaf spring U-bolt, you should replace it. Once they have been tightened and stretch, they have lost their strength. These U-bolts are designed to be used with stock 2" wide front or rear Chevy/GMC half-ton multi-leaf springs.

    Includes flat washers and nylock nuts.

  • Speedway 1947-51 Chevy Pickup Bolt-In Bear-Jaw Door Latches
    Speedway 1947-51 Chevy Pickup Bolt-In Bear-Jaw Door Latches
    (Part #9103038)
    x
                

    Never before has it been so easy to upgrade your classic truck with secure, easy operating bear jaw latches! These bolt-in kits require no welding, just minor trimming that will be covered with the supplied installation plate. Kits are designed to retain your stock exterior and interior door handles and lock cylinders. Stainless steel striker bolts are standard, and each kit includes necessary hardware, templates and instructions.

    Made in the U.S.A.

    910-3038 Instructions (PDF)

  • Speedway 1947-54 Chevy Half-Ton Axle U-Bolts, Set/4
    Speedway 1947-54 Chevy Half-Ton Axle U-Bolts, Set/4
    (Part #9163327)
    x
                

    Anytime you remove a leaf spring U-bolt, you should replace it. Once they have been tightened and stretch, they have lost their strength. These U-bolts are designed to be used with stock 2" wide front or rear Chevy/GMC half-ton multi-leaf springs.

    Save money and buy this set of four. Includes flat washers and nylock nuts.

  • 1947-59 Replacement Seal
    $12.99
    1947-59 Replacement Seal
    (Part #9166064)
    x
                

    If you want to keep your original drum brakes on your favorite truck, we have you covered. The original came with ball-type wheel bearings and if you can find them, they are very expensive. Upgrading to modern tapered bearings is the only way to go. Tapered bearings disperse heat better and can deal with today’s grooved roads and modern wheels and tires much better than the original ball type.

    • 1947-59 Replacement Seal
  • Speedway 1952-54 Chevy Pickup Bolt-In Bear-Jaw Door Latches
    Speedway 1952-54 Chevy Pickup Bolt-In Bear-Jaw Door Latches
    (Part #9103039)
    x
                

    Never before has it been so easy to upgrade your classic truck with secure, easy operating bear jaw latches! These bolt-in kits require no welding, just minor trimming that will be covered with the supplied installation plate. Kits are designed to retain your stock exterior and interior door handles and lock cylinders. Stainless steel striker bolts are standard, and each kit includes necessary hardware, templates and instructions.

    Made in the U.S.A.

    910-3039 Instructions (PDF)

  • Classic Instruments 1947-53 Chevy Pickup Vintage Gauge Set
    Classic Instruments 1947-53 Chevy Pickup Vintage Gauge Set
    (Part #275601)
    x
                

    Classic Instruments built this package to easily replace the gauges in your '47-'53 Chevy pickup. The gauges have a 140 mph electric speedometer, voltmeter, oil pressure, water temperature and fuel level. The fuel level gauge works with your stock '47-'53 Chevy 0-30 ohm sending unit. All other sending units are included.

     

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments CH51AT52 1951-52 Chevy Package Gauge Set, Black
    New
    Classic Instruments CH51AT52 1951-52 Chevy Package Gauge Set, Black
    (Part #2751044)
    x
                Please view the product's page for more information
            
  • OMEGA 47-53 CHEV.PU GAUGES
    $449.99
    Product Rating: 4.00 Stars
    OMEGA 47-53 CHEV.PU GAUGES
    (Part #91122225)
    x
                

    These 5" Omega Kustom Chevy truck gauges are the perfect finishing touch for your truck. They have a programmable electric speedometer and a quad gauge with fuel level, oil pressure, water temperature, and voltage. Each set includes sending units and a GM style speedometer sender. Works with 12 volt systems ONLY.

    The housing measures 4-1/2" and the outside bezel measures 4-11/16".

    Chevy Pickup Gauge Wiring Instructions (PDF)

    Note: Fuel sending unit is the 5-bolt 240 ohm empty, 33 ohm full universal style, NOT the factory original style.

  • 1941-53 Chevy Pickup Hidden Tailgate Hinges
    1941-53 Chevy Pickup Hidden Tailgate Hinges
    (Part #91041080)
    x
                

    Get rid of those bulky, cumbersome tailgate hinges on your classic truck by installing a pair of these simple and attractive hinges. The 1/4" thick hinge plates are so small, they virtually disappear from sight when you weld them to your stake pockets and paint them to match. Two plastic trunions slide into the bottom roll of your tailgate to provide a smooth pivot point. Kit includes necessary hardware and instructions.

    Installation Instructions (PDF) 

  • Speedway Soft Street Organic Brake Pads GM Mid-Size 1969-1977
    Speedway Soft Street Organic Brake Pads GM Mid-Size 1969-1977
    (Part #9193382)
    x
                

    Speedway Motors is your one-stop shop for GM 1969-77 Midsize caliper brake pads.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4. One set will outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • 1947-1954 Chevy 1/2 Ton Pickup Truck Frame Rails
    1947-1954 Chevy 1/2 Ton Pickup Truck Frame Rails
    (Part #91604754)
    x
                

    Build a firm foundation for your vintage 1947-54 Chevy 1/2 ton pickup without picking up a welder! This innovative line of chassis components from Speedway Motors allows the do-it-yourself rodder to assemble a frame using only basic hand tools and a drill.

    • Laser cut from 7-gauge steel plate
    • Replicates shape and dimensions of original Chevy frame
    • Welded on a rail fixture to ensure proper shape
    • Ground and sanded to prep for finishing
    • For '47-'54 1/2 pickups

    916-04754 Instructions (PDF)

    NOTE: Finish will be plain steel, not powder coated as shown.

  • Heidts SB-054 Mustang II Stabilizer Sway Bar Kit, 47-54 Chevy Pickup
    Heidts SB-054 Mustang II Stabilizer Sway Bar Kit, 47-54 Chevy Pickup
    (Part #413054)
    x
                

    These front sway bar kits from Heidts are the best quality suspension components on the market. They come complete with everything you need for a painless installation.

    • For 1947-54 Chevy pickups
    • Includes urethane mount and end-link bushings
    • Hardware included
    • Used in conjunction with standard width lower control arms
  • BedWood Extruded Aluminum Bed Strip Set for 1951-53 Chevy 3100 SWB
    BedWood Extruded Aluminum Bed Strip Set for 1951-53 Chevy 3100 SWB
    (Part #1681601)
    x
                

    These BedStrips™ with hidden fasteners are extruded aluminum, show polished, bright anodized, trimmed to length for your particular application, and ready to install into the stock grooves. Includes stainless hidden fasteners. Made in the USA.

    • Designed for use with bed wood kits for 1951-53 Chevy 3100 SWB stepside pickups 
    • Choose between "Speed-bump" or "Flat-top" style strip kits
    • Ready to install
    • Bright anodized finish
    • Includes hidden fasteners
    • Extruded aluminum
    • Made in U.S.A.
  • 1947-53 Chevy Pickup Bed Roll Lights
    1947-53 Chevy Pickup Bed Roll Lights
    (Part #910110565)
    x
                

    These neat little lights take advantage of the openings on the ends of your bed rolls- space that is otherwise wasted. The simple-to-install LED lights provide extra safety by augmenting your existing tailights, turn signals, and brake lights. The aluminum housings come polished, but can also be painted to match your truck.

    Has a 1.625" body O.D. and 2.00" overall length.

  • Ididit 3000315249 Steering Coupler-3/4 In. Double D to 1 In. Double D
    Ididit 3000315249 Steering Coupler-3/4 In. Double D to 1 In. Double D
    (Part #4465249)
    x
                

    No-shift columns use 1" DD u-joints, while shift columns use 3/4"-36 spline u-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • 1941-1954 1/2 Ton Chevy/GMC Pickup Power Brake Pedal Assembly
    1941-1954 1/2 Ton Chevy/GMC Pickup Power Brake Pedal Assembly
    (Part #91031977)
    x
                

    These brake pedal assemblies allow you to easily install power brakes on your 1941-1954 half ton Chevy and GMC truck.

    Will NOT work in conjunction with the factory clutch pedal. Intended for use with an auto transmission. 

  • Omega Kustom 232025 1947-1953 Chevy Pickup Black 5 In. Quad Gauge Set
    Omega Kustom 232025 1947-1953 Chevy Pickup Black 5 In. Quad Gauge Set
    (Part #91123225)
    x
                

    These 5" Omega Kustom Chevy truck gauges are the perfect finishing touch for your truck. They have a programmable electric speedometer and a quad gauge with fuel level, oil pressure, water temperature, and voltage. Each set includes sending units and a GM style speedometer sender. Works with 12 volt systems ONLY.

    The housing measures 4-1/2" and the outside bezel measures 4-11/16".

    1947-1953 Chevy Pickup Gauge Installation Instructions (PDF)

    Note: Fuel sending unit is the 5-bolt 240 ohm empty, 33 ohm full universal style, NOT the factory original style.

  • WD 1947-1951 1st Chevy 3100 SWB
    From: $449.99
    WD 1947-1951 1st Chevy 3100 SWB
    (Part #1681011201)
    x
                

    These premier show quality BedWood kits are precision milled to 3/4" thick, properly grooved, trimmed to length, sanded and ready to finish! Made in Kentucky, U.S.A. 

    • Bed Wood - Non-Drilled
    • Designed for 1947-51 First Series Chevy 3100 SWB Stepside 
    • Made in Kentucky, U.S.A.
    • Choice of Red Oak, White Oak, or Walnut
    • Precision milled to 3/4" thick
    • Bed Size: 76-7/8" Length x 50" Width
    • Board Qty: 9
    • Bed Strip Qty Needed: 8

    Be sure to add your choice of two styles of extruded aluminum strip kits (includes hidden fasteners).

  • BedWood 101200361 Aluminum Strips 54-55 3100 SWB
    BedWood 101200361 Aluminum Strips 54-55 3100 SWB
    (Part #1682001)
    x
                

    These BedStrips™ with hidden fasteners are extruded aluminum, show polished, bright anodized, trimmed to length for your particular application, and ready to install into the stock grooves. Includes stainless hidden fasteners. Made in the USA.

    • Designed for use with bed wood kits for 1954-55 Chevy 3100 SWB stepside pickups 
    • Choose between "Speed-bump" or "Flat-top" style strip kits
    • Includes hidden fasteners
    • Extruded aluminum
    • Bright anodized finish
    • Ready to install
    • Made in U.S.A.
  • 47-54 GM PU TILT COLUMN PLN
    $479.99
    47-54 GM PU TILT COLUMN PLN
    (Part #4462651)
    x
                Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our couple 446-5249.
            
  • Omega Kustom 212025 47-53 Chevy Pickup White 5 Inch Quad Gauge Set
    Omega Kustom 212025 47-53 Chevy Pickup White 5 Inch Quad Gauge Set
    (Part #91121225)
    x
                

    These 5" Omega Kustom Chevy truck gauges are the perfect finishing touch for your truck. They have a programmable electric speedometer and a quad gauge with fuel level, oil pressure, water temperature, and voltage. Each set includes sending units and a GM style speedometer sender. Works with 12 volt systems ONLY.

    The housing measures 4-1/2" and the outside bezel measures 4-11/16".

    Chevy Pickup Gauge Installation Instructions (PDF)

    Note: Fuel sending unit is the 5-bolt 240 ohm empty, 33 ohm full universal style, NOT the factory original style.

Goto Previous PagePrevious Page
1 2 3