Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 3

Products

Instrument Panel

Shop Classic Instruments At Speedway Motors

Classic Instruments are the first and only manufacturer to combine all-electrical instrumentation and micro-chip technology with the finest quality, accuracy, and vintage styling available at any price. Classic Instruments gauges offer unique concepts and trend-setting designs have kept them ahead of the industry for over 25 years.

Featured Products
  • Classic Instruments CW09SLF-D Classic Fuel Level Gauge
    Classic Instruments CW09SLF-D Classic Fuel Level Gauge
    (Part #275809)
    x
                

    Requires tank-mounted sender #275-235. 2-1/8" diameter.

    Classic Series Gauges: feature polished stainless steel bezels, with white faces and black numbers and pointers.

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments CW81SLF-D Classic Oil Pressure Gauges
    Classic Instruments CW81SLF-D Classic Oil Pressure Gauges
    (Part #275881)
    x
                

    Shows 0-100 psi. Requires 1/8" NPT sender part #275-254 for any engine . 2-1/8" diameter.

    Classic Series Gauges: feature polished stainless steel bezels, with white faces and black numbers and pointers.

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments CW28SLF-A Classic Oil Temperature Gauges
    Classic Instruments CW28SLF-A Classic Oil Temperature Gauges
    (Part #275828)
    x
                

    Reads 140-320° fahrenheit. Requires sender #275222. 2-1/8" diameter.

    Classic Series Gauges: feature polished stainless steel bezels, with white faces and black numbers and pointers.

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments BE01WW 55-56 Chevy Bel Era Series White Gauge Set
    Classic Instruments BE01WW 55-56 Chevy Bel Era Series White Gauge Set
    (Part #275552)
    x
                

    Classic Instruments designed these gauges specifically for your 1955-56 Chevy car. This package replaces your original gauges and incorporates a 140 mph speedometer, 8000 rpm tachometer, oil pressure, volt, water temperature, fuel level plus turn signal and high beam indicators. The fuel gauge is calibrated for 0-30 ohm so it will work with your original '55-'56 sending unit and all other sending units are included.

    Bezel not included, must reuse your original. 

    Shift indicator is NOT included

    No remote sender needed. Classic has built the essential electronic circuit boards right into the gauge. Electronic speedometer calibration no longer requires knuckle busting or removal of the dash panel! 

    140 MPH electronic programmable speedometer

    • 8000 RPM tachometer
    • Fuel, volts, oil and temp gauges
    • Plug & play set-up with remote interface control box
    • Fuel gauge set up for stock fuel sending unit (0-30 ohms)
    • Fits into stock or aftermarket '55-'56 bezel
    • All kits come with glass lens
    This gauge set includes:
    • Programmable, electronic speedometer (includes GM style speedo sender)
    • Electronic oil pressure gauge (plus sender)
    • Electronic temperature gauge (plus sender)
    • Fuel level gauge that is compatible with stock Chevy sending unit (does NOT include the fuel sender. You will need to re-use your original fuel sending unit.)

     

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments Vintage Series 5 Gauge Set
    Classic Instruments Vintage Series 5 Gauge Set
    (Part #2753000)
    x
                

    These Classic Instruments Vintage Series gauges feature 24 carat gold plated bezels with parchment faces and brown numbers with old-fashion style red pointers.

    This set of five authentic style gauges includes: electronic programmable speedometer, hard-couple pulse sender, fuel level gauge with 6-24" adjustable sender, oil pressure gauge with sender, water temperature gauge with sender, voltage gauge (amps on request), and installation booklet #27558510.

    Speedometer measures 3-3/8" in diameter; all others are 2-1/8" in diameter.

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments VT55GSLF Vintage 140 MPH Speedometer
    Classic Instruments VT55GSLF Vintage 140 MPH Speedometer
    (Part #275355)
    x
                

    With odometer. Requires transmission sender #27599GM or #27599FORD, sold separately. Speedometers and Tachometers measure 3-3/8" diameter.

    Vintage Series Gauges: feature 24 carat gold plated bezels, with parchment faces and brown numbers with old-fashion style red pointers.

    Application Note: The hook-up for this speedometer is as follows, red wire from sender to 'B+' terminal on speedometer. White wire from sender to 'sig' term on speedometer. Black wire from sender to 'gnd' term on speedometer. The manufacturer of this speedometer insists that it is very important to provide a 'dedicated' (nothing else hooked-up with it) power wire and groud wire for this speedometer. Dedicated power wire hooks to 'B+' terminal. Dedicated group wire hooks to 'gnd' term. The wires from the sender to the speedometer should be twisted together for their entire length to prevent 'interference' from other electrical sources in the vehicle.

     Classic Instruments Installation Manual (PDF)

  • Classic Instruments MT-51 Chrome Tach Cup
    Classic Instruments MT-51 Chrome Tach Cup
    (Part #275051)
    x
                

    Nothing says "hot rod" like a tachometer strapped to the steering column or perched atop the dash. This chrome-plated mounting cup accepts 3-3/8" tachs and will help you mount your tach where you want it.

    Works well with Classic Instruments and Omega 3-3/8" tachs.

  • Classic Instruments CW30SLF-D Classic Battery Voltage Gauges
    Classic Instruments CW30SLF-D Classic Battery Voltage Gauges
    (Part #275830)
    x
                

    Reads 8-18 volts D.C. 2-1/8" diameter.

    Classic Series Gauges: feature polished stainless steel bezels, with white faces and black numbers and pointers.

     Classic Instruments Installation Manual (PDF)

Filter

"Classic Instruments Street Rod, Instrument Panel" Page 1 of 3

Page 1 of 3

  • Classic Instruments Speedometer Gauge Set, V8 Speedster Face
    Classic Instruments Speedometer Gauge Set, V8 Speedster Face
    (Part #2751018)
    x
                

    Tom Gale, formerly Chief Designer of the Daimler Chrysler Corporation, has led the Classic Instruments design team in the production of a beautiful new series. Designed with unique dial faces that are spun and engine turned aluminum. The pointers for this series is a new design and each pointer is chrome painted. The face has a chrome V8 emblem signifying American Hot Rod Heritage. The light diffusers have laser etched indices lining up with the indices on the gauge faces.

    The V8 Red Steelie series features a vivid red background with spun aluminum numbers and accent graphics that brightly bounce off the red background. The series also features the uniquely designed pointer for the V8 line which is chrome plated and balanced for precision accuracy. Additional details within the instruments are laser etched markings on the light diffuser ring which add a level of dimension and functionality. The etching corresponds with the indices on the face and flow into a polished stainless high step bezel that is crimped around a optic grade curved lens to complete the overall design.

    • Black "V8 Speedster" face design or Red "V8 Red Steelie" face design
    • Kit includes 3-3/8" Speedo & Tach, 2-1/8" Fuel, Oil, Temp, Volts
    • Standard GM sender pack included

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments AN80SHC All American Series Nickel Tach
    Classic Instruments AN80SHC All American Series Nickel Tach
    (Part #275202)
    x
                

    Classic Instruments teamed up with Tom Gale, who was Chief Designer at Chrysler, to produce these beautiful gauges. They feature curved glass, polished stainless bezel, a raised logo and the vintage appearance you are looking for. The tach is 3-3/8".

     Classic Instruments Installation Manual (PDF)

  • Classic Instruments VT09GSLF-D Vintage Fuel Level Gauge
    Classic Instruments VT09GSLF-D Vintage Fuel Level Gauge
    (Part #275309)
    x
                

    Requires tank-mounted sender #275235. 2-1/8" diameter.

    Vintage Series Gauges: feature 24 carat gold plated bezels, with parchment faces and brown numbers with old-fashion style red pointers.

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments Gauge Set Dash Assembly, 1967-68 Chevy Camaro
    Classic Instruments Gauge Set Dash Assembly, 1967-68 Chevy Camaro
    (Part #2751013)
    x
                Classic Instruments '67-'68 Camaro Package gauge  sets dress your classic muscle with modern technology and authentic  looks. Classic combines their 5 in. SpeedTachular and Quad gauges in a  premium OEM reproduction dash bezel to provide you and your Camaro with  all of the accurate data that you need for the roads ahead! This package  is ready to bolt in, come complete with instrument harnesses, and  feature black aluminum bezels, real curved glass, and LED turn signals.  Give your first-generation Camaro or Firebird back its original look,  but with updated precision--add Classic Instruments '67-'68 F-Body  Package gauge sets to your American classic. 
    • Black "Velocity" face design - Blk
    • Black & Green "G-Stock" face design - Gstk
    • For 67-68 Camaro and Firebird
    • Set includes mounting face bezel, pre-assembled bracketry, pre wired, t/s, high beam installed
    • Standard GM sender pack included
    • Fuel level gauge pre-programmed 0-90 ohm to allow stock fuel tank sender to be used
    • No fuel sender included

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments BZMA6GS Outer Gauge Bezels for Bomber Series
    Classic Instruments BZMA6GS Outer Gauge Bezels for Bomber Series
    (Part #2751021)
    x
                Accessorize your ride with the new trim bezel  designed by Moal Coach Builders. The Bomber™ Bezels are guaranteed to  give you the Aviator look you've been searching for! Gauges sold  separately. 
    • Set of 6 - (2) 3-3/8", (4) 2-1/8"
    • Compliment your WWII era build
    • Works on all step-bezel Classic Instruments Gauges
  • Classic Instruments VT28GLF Vintage Oil Temperature Gauge
    Classic Instruments VT28GLF Vintage Oil Temperature Gauge
    (Part #275328)
    x
                

    Classic Series Gauges feature:

    • 2-1/8" diameter
    • 140-320° Fahrenheit
    • Gold bezel
    • Parchment face with black numbers and red pointer
    • Requires sender #275222

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments CW52SLF Classic White Series 5 Inch Gauge Set
    Classic Instruments CW52SLF Classic White Series 5 Inch Gauge Set
    (Part #2756002)
    x
                
    These Classic White Series gauges from Classic Instruments feature polished stainless steel bezels with white faces and black numbers and pointers.

    Authentic-style gauge set includes an electronic programmable speedometer and a 4 gauge cluster.  Includes hard-couple pulse speedo sender, fuel level gauge with 6-24" adjustable sender, oil pressure gauge with sender, water temperature gauge with sender, and voltage gauge.

    Both the speedometer and gauge cluster measure 5" in diameter.

    • 5" speedometer and 5" quad gauge
    • GM style sending units
    • Uses stock 0-30 Ohm fuel sender

     Classic Instruments Installation Manual (PDF)

  • Classic Instruments CW55SLF Classic Series 140 MPH Speedometer
    Classic Instruments CW55SLF Classic Series 140 MPH Speedometer
    (Part #275820)
    x
                

    Classic Series gauges feature polished stainless steel bezels with white faces and black numbers and pointers. Offers a clean and elegant image for your restorod or classic truck.

    • 3-3/8" diameter
    • Fully programmable
    • Includes odometer
    • Requires transmission sender #27599GM or #27599FORD, sold separately

    275-820 Instructions (PDF)

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments Gauge Set Dash Assembly, 1967-72 Chevy Pickup
    Classic Instruments Gauge Set Dash Assembly, 1967-72 Chevy Pickup
    (Part #2751012)
    x
                CT Classic package gauge sets are classic gauges  are handcrafted for your 1967-72 Chevy truck. Classic Instruments CT  Classic gauge sets can give your interior the look that you want.  Stylish gauges are set inside of reproduction housings that include a  wiring harness and mounting hardware. Turn signals and high-beam  indicator are also included. Keep the look authentic, but add the  precision of modern built-in-the-USA technology with CT Classic package  gauge sets from Classic Instruments--the perfect finishing touch! 
    • Black "Velocity" face design - Blk
    • Black & Green "G-Stock" face design - Gstk
    • For 67-72 GM truck
    • Set includes all 7 gauges pre assemblied in bracketry, pre wired, high beam indicator in speedometer
    • New 69-72 style (w/o manual choke hole) reproduction bezel included
    • Standard GM sender pack included
    • Fuel level gauge pre-programed 0-90 ohm to allow stock fuel tank sender to be used
    • No fuel sender included.

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments VT55GSLF Vintage 140 MPH Speedometer
    Classic Instruments VT55GSLF Vintage 140 MPH Speedometer
    (Part #275355)
    x
                

    With odometer. Requires transmission sender #27599GM or #27599FORD, sold separately. Speedometers and Tachometers measure 3-3/8" diameter.

    Vintage Series Gauges: feature 24 carat gold plated bezels, with parchment faces and brown numbers with old-fashion style red pointers.

    Application Note: The hook-up for this speedometer is as follows, red wire from sender to 'B+' terminal on speedometer. White wire from sender to 'sig' term on speedometer. Black wire from sender to 'gnd' term on speedometer. The manufacturer of this speedometer insists that it is very important to provide a 'dedicated' (nothing else hooked-up with it) power wire and groud wire for this speedometer. Dedicated power wire hooks to 'B+' terminal. Dedicated group wire hooks to 'gnd' term. The wires from the sender to the speedometer should be twisted together for their entire length to prevent 'interference' from other electrical sources in the vehicle.

     Classic Instruments Installation Manual (PDF)

  • Classic Instruments CW81SLF-D Classic Oil Pressure Gauges
    Classic Instruments CW81SLF-D Classic Oil Pressure Gauges
    (Part #275881)
    x
                

    Shows 0-100 psi. Requires 1/8" NPT sender part #275-254 for any engine . 2-1/8" diameter.

    Classic Series Gauges: feature polished stainless steel bezels, with white faces and black numbers and pointers.

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments CW28SLF-A Classic Oil Temperature Gauges
    Classic Instruments CW28SLF-A Classic Oil Temperature Gauges
    (Part #275828)
    x
                

    Reads 140-320° fahrenheit. Requires sender #275222. 2-1/8" diameter.

    Classic Series Gauges: feature polished stainless steel bezels, with white faces and black numbers and pointers.

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments MU65HR00 Gauge Set, Hot Rod Face, 1965-66 Mustang
    Classic Instruments MU65HR00 Gauge Set, Hot Rod Face, 1965-66 Mustang
    (Part #2751016)
    x
                We are proud to announce the 1965 1966 Mustang  gauge package. Classic Industries has taken a Hot Rod series five gauge  set  (3-3/8" Speedometer, 2-1/8" Fuel 75-10 ohms range, Volts, Water  Temp, and Oil Pressure Gauges), and combined it with mounting brackets  for the gauges to fit into your Mustang housing. The mounting system is  easy to install and will fit with most aftermarket bezels. Each gauge  set comes with an easy to follow step-by-step instruction manual to wire  in all your gauges.  Gauges only!!!

    • Black "Hot Rod" face design
    • For 65-66 mustang
    • Set includes 5 pc gauge set for GT style dash, mounting bracketry,
    • Standard Ford sender pack included
    • Fuel level gauge pre-programmed 75-10 ohm to allow stock fuel tank sender to be used
    • No fuel tank sender included
    • Outer face bezel not included, must reuse original, or purchase reproduction

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments AN02SHC All American Series Nickel Quad Gauge Set
    Classic Instruments AN02SHC All American Series Nickel Quad Gauge Set
    (Part #275204)
    x
                

    Classic Instruments teamed up with Tom Gale, who was Chief Designer at Chrysler, to produce these beautiful gauges. They feature curved glass, polished stainless bezel, a raised logo, and the vintage appearance you are looking for.

    Included is a 3-3/8" speedometer and a 3-3/8" quad gauge with GM style sending units (included). The fuel sender is 240-33 Ohm.

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments AW00SRC All American Series 5 Gauge Set
    Classic Instruments AW00SRC All American Series 5 Gauge Set
    (Part #275100)
    x
                

    Classic Instruments teamed up with Tom Gale, who was Chief Designer at Chrysler, to produce these beautiful gauges. They feature curved glass, polished stainless bezels, a raised logo, and a vintage appearance that incorporates the unique look of spun metal. The speedo is 3-3/8", while the rest are 2-1/8. 

    They come as a 5 gauge set that includes GM style sending units.

    Classic Instruments Installation Manual (PDF)

  • Classic Instruments VT80GLF Vintage Series Tachometer
    Classic Instruments VT80GLF Vintage Series Tachometer
    (Part #275303)
    x
                

    These Classic Instruments Vintage Series Quad Gauges feature 24 carat gold plated bezels with parchment faces and brown numbers with old-fashion style red pointers.

    3-3/8" diameter. 

    Classic Instruments Installation Manual (PDF)

Goto Previous PagePrevious Page
1 2 3