Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 6

Products

Carburetors

Shop Carburetors At Speedway Motors

Selecting the right carburetor to top off your powerplant is a crucial step in the build. Getting the right size definitely matters when trying to get all that air and fuel into your engine to make as much power as possible. Whether you're looking for a high performance, multi-carb setup or a more conservative, fuel friendly carburetor, we've got all the top brands in the industry. Trust the pros at Speedway Motors to get you the right carb, at the right price.

Featured Products
  • Speedys 9 Super 7    Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
    Speedys 9 Super 7 Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
    (Part #91511655)
    x
                

    Speedway Motors now offers a reproduction version of one of the most popular carburetors ever used, the original Stromberg 97! Original equipment on '30s and '40s cars and trucks, the Stromberg 97 has long been favored by flathead hot rodders and racers who realized the performance qualities of this timeless fuel supplier.

    There have been numerous attempts to reproduce this unit, with little success. "Speedy" Bill Smith of Speedway Motors in Lincoln, Nebraska, took on the challenge to make a great product even better. The 9 Super 7 ® Carb brings this reproduction of the original Stromberg 97 2 barrel carb into the 21st Century!

    Speedway Motors has incorporated all of the improvements shown above while maintaining the carburetor's original look. Features such as the choke assembly, accelerator pump, main jets and cosmetics have all been faithfully retained. Additionally, each carburetor is individually flow tested and inspected for leaks. Perfection is the result! 

    Aesthetically, the 9Super7 is nearly identical to the stock unit, minus the large 97 logo that appeared on the side and the patent numbers found on the float bowl area. Upgraded internal parts include; the float, needle, and seat. Jetting and power valve settings remain as they were for the original 97 carbs as well as the cfm and vacuum specs.

    The other similarity that the 9 Super 7 shares with the original 97 is the setup and tuning necessary to yield a well-running machine. While perhaps not as simple as bolting on a single four-barrel, the 9 Super 7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required is an intake, a linkage system, a Uni-Syn syncing tool, and a little patience. Be sure to include the Secondary 9 Super 7 when installing multi-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

    On the primary 9 super 7 carb the throttle shaft extends from carb body .983" and has the hole on the end to pin the linkage. There is a brass sleeve that the throttle shaft rotates in that extends from the carb body .400 and this leaves the useable throttle shaft length of .583. There is sufficient room for progressive linkage and the manual throttle linkage that rotates over the sleeve.

    • All-new tooling for crisp, flawless castings
    • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
    • Stainless steel screws and hardware
    • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
    • Features original Stromberg 0.97" venturi diameter
    • Modern Nitrophyl float and Neoprene gaskets
    • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
    • Will not stick or dribble like the old Viton-tipped needle and seat setups
    • Grose-style jet valve won't corrode in modern fuel, something the original needle and seat units can't do
    • Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
    • Extended brass throttle shaft to simplify multi-carb linkage

    915-11655 9 Super 7® Carb Instructions (PDF)

    Note: Not recommended for use with Ethanol fuels.

     

  • Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke
    Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke
    (Part #3251406)
    x
                

    Edelbrock Performer Series 4 barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, this Edelbrock carb is the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

    CALIBRATED FOR FUEL ECONOMY
    Designed for small-block and small displacement big-block engines, this four barrel carb is recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock Performer or Performer EPS manifold and other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets Primary .098, Secondary .095; Metering Rods .075 x .047; Step-Up Spring yellow (4" Hg). Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    • Easy to tune with great driveability
    • 600 CFM
    • Electric choke
    • Ford/Mopar arms sold separately

    Edelbrock 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

    Edelbrock Promo - Big Carb Deal (PDF)  

  • Jet Performance 37001 Rochester Circle Track 2 Barrel Carburetor
    Jet Performance 37001 Rochester Circle Track 2 Barrel Carburetor
    (Part #45537001)
    x
                

    This Jet Performance Products 500 CFM 2GC carb is modified specifically for circle track racing. This Rochester carb complies with the IMCA rules. They are arguably the best OEM production two barrel carburetor for use in circle track racing.

    • .135 needle and seat to ensure adequate fuel and supply
    • Idle, transition, and accelerator pumps are modified
    • 1-11/16" bore, 1-3/8 venturi
    • Uses Holley jets (comes equipped with size #74)
    • 5/8-18" inverted flare fuel inlet
    • 2.008" x 3.695" mount pattern w/ .351" mount holes
    • No choke mechanism
    • Modified cluster to keep fuel curve correct throughout the RPM range
  • Edelbrock 1405 Performer 600 CFM 4 Barrel Carburetor, Manual Choke
    Edelbrock 1405 Performer 600 CFM 4 Barrel Carburetor, Manual Choke
    (Part #3251405)
    x
                

    Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance 4 barrel carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock parts are proudly made in the U.S.A.  

    This 600 CFM 4 barrel carburetor is designed and calibrated for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design. Includes manual choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    Edelbrock 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

    Edelbrock Promo - Big Carb Deal (PDF)  

     

  • Edelbrock 1404 Performer 500 CFM 4 Barrel Carburetor, Manual Choke
    Edelbrock 1404 Performer 500 CFM 4 Barrel Carburetor, Manual Choke
    (Part #3251404)
    x
                

    Edelbrock Performer Series 4 barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance four barrel carb to top off your hot rod, the Edelbrock Performer Series 4 barrel carbs are the best choice for performance and value. All Edelbrock parts are proudly made in the U.S.A.  

    This 500 CFM four barrel carburetor is designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford. Match with an Edelbrock Performer or Performer EPS manifold and other brands of similar design. Includes manual choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    • Manual choke 
    • Bolt-on-and-run performance right out of the box
    • Smooth throttle response throughout the power band
    • Uses metering rods to transition between circuits - rods can be changed in seconds without carburetor removal or draining fuel
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Two-piece design means no gaskets below the fuel level for leak-free operation 
    • Lightweight all-aluminum body is compatible with gasohol and blended fuels
    • Includes both timed and full vacuum ports for ignition advance

    Edelbrock Promo - Big Carb Deal (PDF) 

    Edelbrock 500 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-4412CT Circle Track 500 CFM 2 Barrel Carburetor
    Holley 0-4412CT Circle Track 500 CFM 2 Barrel Carburetor
    (Part #42504412)
    x
                This 500cfm 4412CT Holly carb shares the hugely  successful features of the original 4412C but with a couple changes  aimed for circle track cars. The choke has been removed but the horn  remains and has been specially calibrated for circle track use. The  4412C Holley carb is easily the most winningest two barrel carburetor on the market  and comes out of the box ready to run. 

    Features:
    • Choke delete
    • Choke horn remains
    • 50cc accelerator pump
    • 1 timed (spark) port, 1 full vacuum, & 1 PCV port
    • The mandated carbs for many oval track racing sanctioning bodies
    • Calibrated specifically for circle track use
  • Pair of Speedys 9 Super 7    Primary 3-Bolt 2 Barrel Carburetors, Plain
    Pair of Speedys 9 Super 7 Primary 3-Bolt 2 Barrel Carburetors, Plain
    (Part #915116552)
    x
                

    Speedway Motors now offers a reproduction version of one of the most popular carburetors ever used, the original Stromberg 97! Original equipment on '30s and '40s cars and trucks, the Stromberg 97 has long been favored by flathead hot rodders and racers who realized the performance qualities of this timeless fuel supplier.

    There have been numerous attempts to reproduce this unit, with little success. "Speedy" Bill Smith of Speedway Motors in Lincoln, Nebraska, took on the challenge to make a great product even better. The 9 Super 7 ® Carb brings this reproduction of the original Stromberg 97 2 barrel carb into the 21st Century!

    Speedway Motors has incorporated all of the improvements shown above while maintaining the carburetor's original look. Features such as the choke assembly, accelerator pump, main jets and cosmetics have all been faithfully retained. Additionally, each carburetor is individually flow tested and inspected for leaks. Perfection is the result! 

    Aesthetically, the 9Super7 is nearly identical to the stock unit, minus the large 97 logo that appeared on the side and the patent numbers found on the float bowl area. Upgraded internal parts include; the float, needle, and seat. Jetting and power valve settings remain as they were for the original 97 carbs as well as the cfm and vacuum specs.

    The other similarity that the 9 Super 7 shares with the original 97 is the setup and tuning necessary to yield a well-running machine. While perhaps not as simple as bolting on a single four-barrel, the 9 Super 7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required is an intake, a linkage system, a Uni-Syn syncing tool, and a little patience. Be sure to include the Secondary 9 Super 7 when installing multi-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

    On the primary 9 super 7 carb the throttle shaft extends from carb body .983" and has the hole on the end to pin the linkage. There is a brass sleeve that the throttle shaft rotates in that extends from the carb body .400 and this leaves the useable throttle shaft length of .583. There is sufficient room for progressive linkage and the manual throttle linkage that rotates over the sleeve.

     

    • All-new tooling for crisp, flawless castings
    • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
    • Stainless steel screws and hardware
    • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
    • Features original Stromberg 0.97" venturi diameter
    • Modern Nitrophyl float and Neoprene gaskets
    • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
    • Will not stick or dribble like the old Viton-tipped needle and seat setups
    • Grose-style jet valve won't corrode in modern fuel, something the original needle and seat units can't do
    • Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
    • Extended brass throttle shaft to simplify multi-carb linkage
    • Perfect for use with our dual carb intake manifolds for Ford Flatheads

    915-11655 9 Super 7® Carb Instructions (PDF)

    Note: Not recommended for use with Ethanol fuels.

     

  • Edelbrock 1151 94 2-Barrel Carburetor
    Edelbrock 1151 94 2-Barrel Carburetor
    (Part #3251151)
    x
                

    In 1938, the 94 two-barrel carburetor was born, fueling flatheads and other engines until production ceased in 1957. Flash-forward to 2010 and the 94 is once again available, by none other than Edelbrock! Adding to Edelbrock's reputation of bolt-on and perform carburetors, the Edelbrock 94 two barrel carburetor is intended for nostalgic and period correct hot rods and restorations.

    Like the Holley 94 carburetor and Ford 94 carburetor that came before it, this Edelbrock carburetor features a die-cast bowl and air horn with a cast iron 3-bolt flange. It's throttle shaft has been extended to make it easier to set-up dual and triple carburetor combinations, especially when used with Edelbrock's exclusive progressive linkage. Extensive testing, both on the road and in a state-of-the-art engine dynamometer facility has allowed Edelbrock to fine tune power valve and jetting combinations to deliver smooth and strong performance. This 2 barrel Edelbrock carb is finished off with a zinc-dichromate coating for durability and classic looks.

    This is a “hot rod” style 2 barrel carb, designed specifically for multi-carb systems. It is not a direct bolt on replacement for OEM applications and will require modifying the factory throttle linkage to use it as such.

    • Machined and assembled by Edelbrock in the U.S.A
    • 3-bolt cast aluminum base
    • Designed & calibrated for use in small cubic inch engines
    • Match with an Edelbrock intake manifold, cylinder heads, linkage, fuel blocks and Classic series accessories for the complete classic look of the early hot rod era
    • Fits Edelbrock Ford flathead intakes #1100, #1103, #1108, #1109 & small block Chevy #5414 & #5418

Filter

"Carburetion, Carburetors" Page 1 of 6

Page 1 of 6

  • Edelbrock 1413 Performer 4 Barrel Carburetor, 800 CFM, Electric Choke
    Edelbrock 1413 Performer 4 Barrel Carburetor, 800 CFM, Electric Choke
    (Part #3251413)
    x
                

    Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

    Designed and calibrated for maximum street performance with most Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately.

    • Electric choke 
    • Smooth throttle response throughout the power band
    • Uses metering rods to transition between circuits - rods can be changed in seconds without carburetor removal or draining fuel
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Lightweight all-aluminum body is compatible with gasohol and blended fuels
    • Includes both timed and full vacuum ports for ignition advance

    Edelbrock 800 CFM 4 Barrel Carburetor Installation Instructions (PDF)

     

  • Garage Sale - Edelbrock 1804 Dual Quad 4 Barrel Carburetor, 500 CFM, Manual Choke
    Garage Sale
    Garage Sale - Edelbrock 1804 Dual Quad 4 Barrel Carburetor, 500 CFM, Manual Choke
    (Part #UP34172)
    x
                Please view the product's page for more information
            
  • Holley 0-80670 Avenger 670 CFM 4 Barrel Carburetor, Electric Choke
    Holley 0-80670 Avenger 670 CFM 4 Barrel Carburetor, Electric Choke
    (Part #42580670)
    x
                

    The Holley Street Avenger Model 4150 four barrel carb is the ultimate vacuum secondary street performance upgrade. This 4 barrel carb is street ready right out of the box and features a calibrated electric choke, air and fuel adjustments and built in fuel filters. There are clear sights for easy float adjustments, adjustable vacuum secondaries and four vacuum ports. Plus it has a million mile power valve, is 100% wet flow tested and includes fittings.

    • No Trouble quick change vacuum secondaries - up to 6% more acceleration or 5% better fuel economy with simple spring change (springs included) 
    • Vacuum secondaries allow use on wide variety of vehicles
    • Tuneable fuel metering system
    • Dual feed fuel inlet
    • 1 timed (spark) port, 2 full vacuum, and 1 PCV port
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • Calibrated for monster low-end torque, awesome acceleration, & unmatched top-end horsepower
    • Bolt on & go design
    • Electric choke

    Holley 670 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 14064 Endurashine Performer 600 CFM 4 BBL Carb, Electric
    Edelbrock 14064 Endurashine Performer 600 CFM 4 BBL Carb, Electric
    (Part #32514064)
    x
                Please view the product's page for more information
            
  • Garage Sale - Edelbrock 1805 Thunder Series AVS 650 CFM 4 Barrel Carburetor, Manual
    Garage Sale
    Garage Sale - Edelbrock 1805 Thunder Series AVS 650 CFM 4 Barrel Carburetor, Manual
    (Part #UP51494)
    x
                Please view the product's page for more information
            
  • Edelbrock 14073 Performer 4 Barrel Carb, 750 CFM, Manual Choke, Black
    Edelbrock 14073 Performer 4 Barrel Carb, 750 CFM, Manual Choke, Black
    (Part #32514073)
    x
                Please view the product's page for more information
            
  • Edelbrock 18064 Endurashine AVS 4 Barrel Carb, 650 CFM, Electric Choke
    Edelbrock 18064 Endurashine AVS 4 Barrel Carb, 650 CFM, Electric Choke
    (Part #32518064)
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted, in seconds, to suit your application - no extra parts required to achieve optimum performance. Also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Two-piece design means no gaskets below the fuel level for leak-free operation

    Edelbrock 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Demon Carb 1903 Street Demon 750 CFM 4 Bbl Carburetor, Ball Brnshd Alu
    Demon Carb 1903 Street Demon 750 CFM 4 Bbl Carburetor, Ball Brnshd Alu
    (Part #91012014)
    x
                Please view the product's page for more information
            
  • Edelbrock 1411 Performer 750 CFM 4 Barrel Carburetor, Electric Choke
    Edelbrock 1411 Performer 750 CFM 4 Barrel Carburetor, Electric Choke
    (Part #3251411)
    x
                

    Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock 4 barrel carb or are looking for a performance 4 barrel carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

    Designed for 402 c.i.d. and larger engines with Edelbrock Performer manifolds and other brands of similar design, these four barrel carbs are recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Calibrated 2% leaner than #1407. Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately.

    • Electric choke 
    • Smooth throttle response throughout the power band
    • Uses metering rods to transition between circuits - rods can be changed in seconds without carburetor removal or draining fuel
    • Lightweight all-aluminum body is compatible with gasohol and blended fuels
    • Includes both timed and full vacuum ports for ignition advance

    Edelbrock 750 CFM 4 Barrel Carburetor Installation Instructions (PDF)

     

     

  • Holley 0-7448 350 CFM Gas 2 Barrel Carburetor
    Holley 0-7448 350 CFM Gas 2 Barrel Carburetor
    (Part #4257448)
    x
                

    Holley Model 2300 two barrel carburetors are great for improving or updating many stock Chrysler and Ford car and truck applications. The 350 CFM 2 barrel carburetor is ideal for small blocks. It features a manual choke, center hung float bowl, universal throttle lever, power valve blow-out protection, blue non-stick gaskets, and Fort A/T kickdown.

    • Power Valve Blow-out Protection for trouble-free operation
    • Manual choke
    • Center Hung Float bowl
    • Factory set 30cc accelerator pump for excellent off-idle performance
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • Dichromate finish for a classic, period look that will last

    Holley 350 CFM 2 Barrel Carburetor Installation Instructions (PDF)

  • Willys Carbs WCD50127-E85 GM 604 Crate Motor 4 Barrel Carburetor, E85
    Willys Carbs WCD50127-E85 GM 604 Crate Motor 4 Barrel Carburetor, E85
    (Part #80080127E)
    x
                

    If you are running the GM 604 crate motor, you need one of these Willy's four barrel carburetors. They are specifically built and dyno tuned to give you maximum power from your crate engine.

    • Billet metering blocks
    • Based on a 750HP body, flows over 900 CFM
    • Down leg boosters
    • Choke horn/tower removed for increased flow
  • Holley 0-76750HB 750 CFM Ultra Double Pumper 4 Barrel Carb
    Holley 0-76750HB 750 CFM Ultra Double Pumper 4 Barrel Carb
    (Part #42576750)
    x
                

    The new Ultra Double Pumper four barrel carburetors have an enhanced fuel curve for optimum performance, with many more features such as aluminum construction; Hard Core Gray™ finish w/ black anodized billet aluminum metering blocks and base plate; 4 corner idle for precise idle control; mechanical secondaries for great performance; clear fuel level sight plugs for easy, no mess fuel level adjustments; Ford automatic transmission kickdown for use on popular Ford transmissions; four vacuum ports for all necessary vacuum accessories; and for the first time on a Double Pumper, factory pre–set electric choke for easy, fast cold start–ups.

    • ULTRA light – aluminum construction for 36% weight savings
    • ULTRA strong – billet metering blocks & base plates
    • ULTRA cool – Hard Core Gray™ w/ black anodized billet aluminum metering blocks and base plate
    • ULTRA easy – built in sight window for simple float adjustments
    • ULTRA fast – high performance fuel curves

    Holley Double Pumper Carburetor Installation Instructions (PDF)

  • Edelbrock 1407 Performer 4 Barrel Carburetor, 750 CFM, Manual Choke
    Edelbrock 1407 Performer 4 Barrel Carburetor, 750 CFM, Manual Choke
    (Part #3251407)
    x
                

    Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock parts are proudly made in the U.S.A.  

    This 750 CFM 4 barrel carburetor is designed and calibrated for optimum street performance in small-block and big-block engines with Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Includes manual choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    Edelbrock 750 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Willys Carbs WCD44120HA 2-Barrel Racing Carburetor, High Altitude
    Willys Carbs WCD44120HA 2-Barrel Racing Carburetor, High Altitude
    (Part #80044120HA)
    x
                Willy's two barrel carbs make much more power than stock, but retain the stock appearance and will pass tech. 
            
  • Holley 0-80787-1 Keith Dorton HP 350 CFM Gas 2 Barrel Carburetor
    Holley 0-80787-1 Keith Dorton HP 350 CFM Gas 2 Barrel Carburetor
    (Part #42780787)
    x
                This is the top of the line two barrel carb.  The famed carb guru, Keith Dorton, designed and massaged this two barrel carb to give you maximum performance.  Race ready features include: 

     

    • Purpose built for short track racing.
    • No choke provisions provides smoother airflow.
    • No vacuum or PCV holes.
    • 30 cc accel. pump for smoother "off the corner" use.
    • Power valve blowout protection
    • Button head throttle plate screws are loctited.
    • Screw-in air bleeds for precise tuning.
    • HP metering block for strength.
    • Factory flowed to insure quality.
    • Reusable fuel bowl screw gaskets.
    • Throttle shaft hole plugged to eliminate leaks.
    • Stainless steel throttle plates with air bypass holes for smooth idle.
    • All bore, throttle plate, venturi & critical sizes are to factory spec.
    • Welded throttle lever and shaft.
    Holley 2 Barrel Carb Installation Instructions (PDF)
  • Garage Sale - Holley 0-8007 4160 Street 390 CFM 4 Barrel Carburetor
    Garage Sale
    Garage Sale - Holley 0-8007 4160 Street 390 CFM 4 Barrel Carburetor
    (Part #UP51393)
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3 4 5 6