Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Air and Fuel Delivery At Speedway Motors

Getting the right mix of fuel and oxygen into your engine can be tricky. Our award winning Techs can help set up a race-winning fuel system that makes serious power, but is reliable enough for your daily driver. From air cleaners to superchargers, Speedway Motors wants to help makes sure you never starve your engine again!

"Carburetion, Carburetor Repair Kits" Page 1 of 1

  • Holley 94 2 Barrel Carburetor Rebuild Kit
    Holley 94 2 Barrel Carburetor Rebuild Kit
    x
                

    Model AA-1 2100, & 2110 (Replacement 97 Carb). Complete gasket set includes new needle & seat, power valve and accelerator pump.

    910-11596 Instructions (pdf)

  • Stromberg 97 Master Carburetor Rebuild Kit
    Stromberg 97 Master Carburetor Rebuild Kit
    x
                

    This Stromberg 97 master carb rebuild kit is intended for use on carburetors that need cleaning and require minor replacement of parts, but are otherwise in satisfactory mechanical condition. This Stromberg 97 rebuild kit includes a complete gasket set, needle & seat, air bleed screws, size 48 jets, and accelerator pump.

    Works on original Stromberg 97 carburetors.

    910-11598 Instructions (PDF)

  • Stromberg 97 Standard Carburetor Rebuild Kit
    Stromberg 97 Standard Carburetor Rebuild Kit
    x
                

    This economy Stromberg 97 carb rebuild kit is intended for use on carburetors that need cleaning and require minor replacement of parts, but are otherwise in satisfactory mechanical condition. This Stromberg 97 rebuild kit includes a complete gasket set, needle & seat, air bleed screws, and accelerator pump.

    Works on both original Stromberg 97 carbs and Speedway 9 Super 7 carburetors. 

    910-11597 Instructions (PDF)

    If your carb requires a more in-depth rebuild, order rebuild kit 910-11598 which includes all of the above plus size 48 jets.

  • Edelbrock 1477 Performer Carburetor Rebuild Kit
    Edelbrock 1477 Performer Carburetor Rebuild Kit
    x
                

    Includes parts & gaskets to rebuild all Edelbrock Performer square-bore carbs.

    325-1477 Instructions (PDF)

  • Hi-Flow Squirter Screw
    $5.99
    Hi-Flow Squirter Screw
    x
                  The radiused head and added internal passages allow increased air and fuel flow. Easy installation. Gas Only.   
            
  • Holley 37-1544 4150 4 Barrel Carburetor Rebuild Fast Kit
    Holley 37-1544 4150 4 Barrel Carburetor Rebuild Fast Kit
    x
                

    These kits are ideal for a quick refresher of your four barrel Holley carb. Each kit includes step-by-step instructions and a detailed tuning guide. Fits 650 CFM and 750 CFM carburetors.

    427-371544 Instructions (PDF)

  • Holley 37-474 2 Barrel 500 CFM Rebuild Kit
    Holley 37-474 2 Barrel 500 CFM Rebuild Kit
    x
                

    Each Holley Renew Kit carburetor rebuild kit contains all parts and gaskets that are necessary to restore “like new” performance to your carburetor. Detailed instructions are also included to guide you through the rebuilding process. Start off the season with a quality Holley Renew Kit repair kit. It's your guarantee for trouble–free cruising.

    Fits Holley Model 2300 500cfm two barrel carburetors ONLY.

    • Gaskets
    • O-Rings
    • Pump Diaphragm
    • Needle & Seat
    • Power Valve
    • Instructions

    427-37474 Instruction Sheet (PDF)

  • Holley 37-1542 4160 4 Barrel Carburetor Rebuild Fast Kit
    Holley 37-1542 4160 4 Barrel Carburetor Rebuild Fast Kit
    x
                

    These kits are ideal for a quick refresher of your four barrel Holley carb. Each kit includes step-by-step instructions and a detailed tuning guide.

    427-371542 Instructions (PDF)

  • Holley 37-1536 Performance Carburetor Renew Rebuild Kit
    Holley 37-1536 Performance Carburetor Renew Rebuild Kit
    x
                

    Each Holley Renew Kit carburetor rebuild kit contains all parts and gaskets that are necessary to restore “like new” performance to your four barrel carburetor. Detailed instructions are also included to guide you through the rebuilding process. Start off the season with a quality Holley Renew Kit repair kit. It's your guarantee for trouble–free cruising.

    • Serves all Holley Performance Carburetors
    • Genuine Holley quality parts
    • Extra parts for performance tuning
    • Step-by-step instructions
    • Detailed tuning guide
    • Packaging also parts tray
    • Includes:
      • Gaskets
      • O-Rings
      • Pump Diaphragm
      • Needle & Seat
      • Power Valve 
      • Step-By-Step Instructions
      • Detailed Tuning Guide

    427371536 Carb Rebuild Manual (PDF)

    427371536 Carb Exploded View (PDF) 

    427371536 Carb Kit Specifications (PDF) 

    427371536 Carb Addendum (PDF) 

  • Holley 37-485 4150 4 Barrel Carburetor Rebuild Renew Kit
    Holley 37-485 4150 4 Barrel Carburetor Rebuild Renew Kit
    x
                

    These kits give you the parts required to bring your Holley four barrel carb back to original specifications and "like new" condition. The Renew Kit package includes new gaskets, O-rings, pump diaphragms, needle and seats, power valves, and a detailed instruction sheet to take you step-by-step through the rebuilding process. 

    427-37485 Instructions (PDF)

  • Holley 37-1539 4150 4 Barrel Alcohol Carburetor Rebuild Master Kit
    Holley 37-1539 4150 4 Barrel Alcohol Carburetor Rebuild Master Kit
    x
                

    Each Holley Renew Kit carburetor rebuild kit contains all parts and gaskets that are necessary to restore “like new” performance to your four barrel carburetor. Detailed instructions are also included to guide you through the rebuilding process.

    Kit includes: 

    • Gaskets
    • O-Rings
    • Pump Diaphragms
    • Needle & Seats
    • Power Valves
    • Step-By-Step Instructions
    • Detailed Tuning Guide

    427-71539 Instructions (PDF)

  • Holley 37-720 Renew 4 Barrel Carb Rebuild Kit, Model 4160, 390 CFM
    Holley 37-720 Renew 4 Barrel Carb Rebuild Kit, Model 4160, 390 CFM
    x
                

    Rebuild kit for Holley Model 4160 four barrel 390 CFM carburetor.

    427-37720 Instructions (PDF)

  • Road Demon 190003 4 Barrel Carburetor Rebuild Kit
    Road Demon 190003 4 Barrel Carburetor Rebuild Kit
    x
                

    When it's time to rebuild your Road Demon 4 barrel carburetor, be sure to use a genuine Demon Fuel Systems carburetor rebuild kit. These rebuild kits include every possible gasket and seal you'll need along with many parts not included in other kits like detailed instructions and a power valve. Each kit covers virtually every carburetor in the listed "family". Available with red non–stick gaskets or reusable Buna gaskets for the fuel bowl, metering block, and bowl screws.

    For Road Demon vacuum secondary carburetors.

    910-12045 Instructions (PDF) 

  • Garage Sale - Holley Carb Quickey Kit
    $9.99
    $14.99
    Garage Sale
    Garage Sale - Holley Carb Quickey Kit
    x
                

    This kit is for Holley carbs. with jet plates.

     

    This kit is garage sale priced because it is new old stock.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Keihin FCR Carb Rebuild Kit
    $43.99
    Keihin FCR Carb Rebuild Kit
    x
                Genuine Keihin replacement parts. Kit includes gaskets and o-rings to rebuild one carburetor body.
            
  • Holley 37-754 Model 4160 4 Barrel, 750 CFM Rebuild Kit
    Holley 37-754 Model 4160 4 Barrel, 750 CFM Rebuild Kit
    x
                

    Each Holley Renew Kit carburetor rebuild kit contains all parts and gaskets that are necessary to restore “like new” performance to your four barrel carburetor. Detailed instructions are also included to guide you through the rebuilding process. Start off the season with a quality Holley Renew Kit repair kit. It's your guarantee for trouble–free cruising. 

    • Gaskets
    • O-Rings
    • Pump Diaphragm
    • Needle & Seat
    • Power Valve 
    • Step-By-Step Instructions
    • Detailed Tuning Guide
    427-37754 Instructions (PDF)
  • Holley 37-119 Model 4160 4 Barrel, 600 CFM Carb Rebuild Kit
    Holley 37-119 Model 4160 4 Barrel, 600 CFM Carb Rebuild Kit
    x
                

    Each Holley Renew Kit carburetor rebuild kit contains all parts and gaskets that are necessary to restore “like new” performance to your four barrel carburetor. Detailed instructions are also included to guide you through the rebuilding process. Start off the season with a quality Holley Renew Kit repair kit. It's your guarantee for trouble–free cruising.

    For Holley 600 CFM electric choke, side hung float bowl.

    • Gaskets
    • O-Rings
    • Pump Diaphragm
    • Needle & Seat
    • Power Valve 
    • Step-By-Step Instructions
    • Detailed Tuning Guide
    427-37119 Instructions (PDF)
  • Billet Double Pumper Conversion Kit
    Billet Double Pumper Conversion Kit
    x
                

    Is your carburetor still using 1950's technology? Upgrade it for serious performance using these billet aluminum metering blocks.

    586-67165 is a race-ready double pumper conversion that includes a primary block with original vacuum provisions and a secondary block with no power valve provision. The double pumper blocks have provisions for four-corner idle systems.

  • Holley 37-1541 Performance Carburetor Renew Rebuild Kit
    Holley 37-1541 Performance Carburetor Renew Rebuild Kit
    x
                

    Each Holley Renew Kit carburetor rebuild kit contains all parts and gaskets that are necessary to restore “like new” performance to your four barrel carburetor. Detailed instructions are also included to guide you through the rebuilding process. Start off the season with a quality Holley Renew Kit repair kit. It's your guarantee for trouble–free cruising.

    • Serves all Holley Performance Carburetors
    • Genuine Holley quality parts
    • Extra parts for performance tuning
    • Step-by-step instructions
    • Detailed tuning guide
    • Packaging also parts tray
    • Includes:
      • Gaskets
      • O-Rings
      • Pump Diaphragm
      • Needle & Seat
      • Power Valve 
      • Step-By-Step Instructions
      • Detailed Tuning Guide

    427371541 Carb Rebuild Manual (PDF)

    427371541 Carb Exploded View (PDF) 

    427371541 Carb Kit Specifications (PDF) 

  • Holley 37-1543 2300 2 Barrel Carburetor Rebuild Fast Kit
    Holley 37-1543 2300 2 Barrel Carburetor Rebuild Fast Kit
    x
                

    These kits are ideal for a quick refresher of your two barrel Holley carb. Each kit includes step-by-step instructions and a detailed tuning guide.

    Kit includes one 30cc and one 50cc accelerator pump (black material for gas) and one 6.5 power valve.

    427-371543 Instructions (PDF)

  • Proform 67166C Billet Carburetor Metering Block For Holley Carbs
    Proform 67166C Billet Carburetor Metering Block For Holley Carbs
    x
                

    Is your carburetor still using 1950's technology? Upgrade it for serious performance using these billet aluminum metering blocks.

    586-67166 is a standard replacement block for 2300-, 4150- and 4160- series carbs and offers improved throttle response.

     

  • Race Demon 190004 Carburetor Rebuild Kit, Gas
    Race Demon 190004 Carburetor Rebuild Kit, Gas
    x
                

    When it's time to rebuild your Race Demon carburetor, be sure to use a genuine Demon Fuel Systems carburetor rebuild kit. These rebuild kits include every possible gasket and seal you'll need along with many parts not included in other kits like detailed instructions and a power valve. Each kit covers virtually every carburetor in the listed "family". Available with red non–stick gaskets or reusable Buna gaskets for the fuel bowl, metering block, and bowl screws.

    For gasoline Race Demon mechanical secondary carburetors. 

    910-12015 Instructions (PDF) 

  • Edelbrock 1154 Holley 94 2 Barrel Carburetor Rebuild Kit
    Edelbrock 1154 Holley 94 2 Barrel Carburetor Rebuild Kit
    x
                This kit has everything needed to rebuild any Edelbrock 94 or Holley 94 two barrel 3-bolt flange carberetor. Includes fuel inlet seat, fuel inlet needle, accelerator pump assembly, accelerator pump spring, accelerator check ball, check ball retainer, power valve assembly, float gauge and all necessary gaskets.
            
  • Holley 37-1546 4150HP 4 Barrel Carb Rebuild Fast Kit
    Holley 37-1546 4150HP 4 Barrel Carb Rebuild Fast Kit
    x
                

    Holley Fast Kits are ideal for a quick carburetor freshening and include a detailed tuning guide and step-by-step instructions. For Holley Model 4150HP carburetors. This includes 650 CFM and 750 CFM four barrel carburetors.

    • Gaskets
    • O-Rings
    • Pump Diaphragm
    • Needle & Seat
    • Power Valve 
    • Step-By-Step Instructions
    • Detailed Tuning Guide

    427-371546 Instructions (PDF)