Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Air and Fuel Delivery At Speedway Motors

Getting the right mix of fuel and oxygen into your engine can be tricky. Our award winning Techs can help set up a race-winning fuel system that makes serious power, but is reliable enough for your daily driver. From air cleaners to superchargers, Speedway Motors wants to help makes sure you never starve your engine again!

"Carburetion, Accelerator Linkage Rod Connectors" Page 1 of 1

All

New

Garage Sale

  • Lokar S-68156 5/16-24 Inch Thread Rod End w/Nut, Pair
    Lokar S-68156 5/16-24 Inch Thread Rod End w/Nut, Pair
    (Part #491S68156)
    x
                
    • Rod Ends
    • Made In The U.S.A.
    • Lifetime Warranty
  • Stallard Chassis Sprint Long Throttle Pedal Linkage
    Stallard Chassis Sprint Long Throttle Pedal Linkage
    (Part #9656230256)
    x
                

    This anodized aluminum throttle rod is 1/4"-28 RH threaded on each end. It attaches your pedal to your throttle bell crank.

    • 10.25" Overall length 
    • Sold Individually
    • 1/4"-28 RH threaded ends
    • Stallard Sprint Chassis


  • Carb Linkage Thread End for 9 Super 7   /Stromberg 97/Demon 98 Carbs, RH
    Carb Linkage Thread End for 9 Super 7 /Stromberg 97/Demon 98 Carbs, RH
    (Part #5600098)
    x
                

    This carb linkage rod end has 3/16" fine RH threads (also known as 10-32).  It is intended for use with 9 Super 7 ®, Stromberg 97, and Demon 98 carburators.

    • 3/16" fine RH threads (10-32)
    • Secures with pin
    • Steel
    • .430" Diameter
    • Application:
      • 9 Super 7 ®
      • Stromberg 97
      • Demon 98
  • Henchcraft Mini Lightning Sprint Throttle Linkage Spacer
    Henchcraft Mini Lightning Sprint Throttle Linkage Spacer
    (Part #9707110)
    x
                

    These throttle linkage spacers are perfect for rod end misalignment.  They feature a 1/4" inside diameter cone shaped design to allow a greater range of travel.

    • 1/4" I.D. cone spacer
    • For rod end misalignment
  • Lokar S-68155 1/4-28 Inch Thread Rod End w/Nut, Pair
    Lokar S-68155 1/4-28 Inch Thread Rod End w/Nut, Pair
    (Part #491S68155)
    x
                
    • Rod Ends
    • Made In The U.S.A.
    • Lifetime Warranty
  • Edelbrock 1159 94 Carburetor Ball-End Stud Arm
    Edelbrock 1159 94 Carburetor Ball-End Stud Arm
    (Part #3251159)
    x
                This part is a bolt on throttle ball that is designed to be used only in conjunction with the Edelbrock 94 carb, part number 3251151. This part bolts to the passenger side of the carburetor, and allows the use of the OEM ball and socket style throttle linkage.
            
  • Single End Carburetor Linkage Rod, 7 Inches Long
    Single End Carburetor Linkage Rod, 7 Inches Long
    (Part #5601002)
    x
                

    3/16" steel throttle rod carburetor linkage with a single end. For use with 9 Super 7 ®, Stromberg 97, and Demon 98 carbs.

  • Single End Carburetor Linkage Rod, 3-1/2 Inches Long
    Single End Carburetor Linkage Rod, 3-1/2 Inches Long
    (Part #5601001)
    x
                

    3/16" steel throttle rod carburetor linkage with a single end. For use with 9 Super 7 ®, Stromberg 97, and Demon 98 carbs.

  • Double End Carburetor Linkage, 3 Inches Long, Non-Adjustable
    Double End Carburetor Linkage, 3 Inches Long, Non-Adjustable
    (Part #5600001)
    x
                

    This 3" long, double-end carb linkage is constructed from 3/16" steel rod. Non-adjustable design. For use with 9 Super 7 ®, Stromberg 97, and Demon 98 carbs.

  • Henchcraft Chassis Mini Lightning Sprint Throttle Linkage Rod
    Henchcraft Chassis Mini Lightning Sprint Throttle Linkage Rod
    (Part #9707104)
    x
                

    New from Henchcraft Chassis, these throttle linkage rods are designed for use with Mini Lightning Sprint chassis.  9" throttle rod with bend for clearance. Mates to proprietary bell crank for smooth operation. Threaded ends for male rod ends.

    • Throttle linkage rod only
    • Will not allow throttle to stick
    • Return springs can be added to fit driver preference
    • For use on Henchcraft Mini Lightning Sprint chassis
  • Moroso 65444 1:1 Slip Linkage Kit for 4150 Holley
    Moroso 65444 1:1 Slip Linkage Kit for 4150 Holley
    (Part #54565444)
    x
                These slip links for Holley 4150 carbs are designed to replace the "progressive" stock link to provide simultaneous, 1:1 primary and secondary opening rates.
    • Replaces "progressive" stock link
    • 1:1 primary and secondary opening rates
    • Requires drilling of existing primary throttle arm hole
    • One per package

    54565444 Instructions (PDF)

  • Aluminum Adjustable Throttle Linkage Rod
    Aluminum Adjustable Throttle Linkage Rod
    (Part #91011020)
    x
                

    Accelerator linkage rod is 25-1/2" long with 1/4" rod ends.

    • 25-1/2" long "hex" aluminum
    • 1/4" male rod ends
    • Anodized purple

     

  • Carb Linkage Thread End for 9 Super 7   /Stromberg 97/Demon 98 Carbs, LH
    Carb Linkage Thread End for 9 Super 7 /Stromberg 97/Demon 98 Carbs, LH
    (Part #5600099)
    x
                

    This carb linkage rod end has 3/16" fine LH threads (also known as 10-32).  It is intended for use with 9 Super 7 ®, Stromberg 97, and Demon 98 carburators.

    • 3/16" fine LH threads (10-32)
    • Secures with pin
    • Steel
    • .430" Diameter
    • Application:
      • 9 Super 7 ®
      • Stromberg 97
      • Demon 98

     

  • Single End Carburetor Linkage Rod, 9 Inches Long
    Single End Carburetor Linkage Rod, 9 Inches Long
    (Part #5601003)
    x
                

    3/16" steel throttle rod carburetor linkage with a single end. For use with 9 Super 7 ®, Stromberg 97, and Demon 98 carbs.

  • Stallard Chassis Sprint Short Throttle Pedal Linkage
    Stallard Chassis Sprint Short Throttle Pedal Linkage
    (Part #9656230255)
    x
                

    This anodized aluminum throttle rod will connect your throttle pedal to your bell crank. It has 1/4"-28 RH threads on both ends.

    • 7.25" Overall Length
    • Sold Individually
    • 1/4"-28 RH threaded ends
    • Stallard Sprint Chassis
  • Stromberg 97-Style Center Carb Throttle Shaft Arm
    Stromberg 97-Style Center Carb Throttle Shaft Arm
    (Part #5606181)
    x
                

    Throttle arms to attach linkage to the 0.282" dia., extended shafts on Stromberg 97's, 9 Super 7 ® and Ford/Holley 94 carbs. Use with 3/16" (10-32) heims and linkage.

    560-6181 Instructions (PDF)

  • Lokar S-6996 1/4-28 Inch Threaded Linkage Rod, 15 Inch
    Lokar S-6996 1/4-28 Inch Threaded Linkage Rod, 15 Inch
    (Part #491S6996)
    x
                
    • Shifter Linkage Rod Assembly
  • Holley 20-3 1 to 1 Throttle Shaft
    Holley 20-3 1 to 1 Throttle Shaft
    (Part #427203)
    x
                This throttle shaft converts throttle linkage to 1:1 ratio. Better throttle response and HP. Fits Holley 4150 carbs.

    Note:  Throttle linkage only fits carbs with 1-11/16" throttle bores.