Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 3

Products

Shop BSB Manufacturing At Speedway Motors

BSB is a supplier of high performance suspension components for all levels of motor sports racing. The BSB Mfg. product line includes a wide range of suspension parts for all forms of racing. BSB components are utilized by championship winning teams world wide, and can be found on race tracks all across the country on any given weekend.

Featured Products
  • BSB Manufacturing 7070 Steel Bearing Brake Floater
    BSB Manufacturing 7070 Steel Bearing Brake Floater
    (Part #91045534)
    x
                This one-bearing brake floater fits metric calipers.
            
  • BSB Manufacturing 4711 Telescoping Carburetor Fuel Log
    BSB Manufacturing 4711 Telescoping Carburetor Fuel Log
    (Part #9104711)
    x
                

    This BSB Manufacturing fuel log slides in and out to fit virtually any Holley style carb. Carburetor fuel line features a three O-ring design to eliminate leakage.

    • Log features -8AN inlet
    • 3/8" NPT rear port
    • Aluminum Fuel Bowl Gaskets included

    Note:  Catalog correction- This unit does not feature an 1/8" NPT port.  Fitting # 617-7035 can be used in conjunction with this item when an 1/8" NPT port is required.

  • BSB Manufacturing 7500 Outlaw Bearing Coil Spring Slider, Std Length
    BSB Manufacturing 7500 Outlaw Bearing Coil Spring Slider, Std Length
    (Part #91045565)
    x
                

    New, state of the art bearing slider allows for less maitenance and higher load rating. Lighter design allows you to use 10" to 15" long, 5" O.D. springs. Handy pull pin design does away with the clumsy jam nut on the spring adjusting plate. Includes two 1/2" rod ends.

    • Can run 20x more side load than standard linear bearing
    • Has 5x the life of standard bearing 
    • Slotted plate for fast spring changes
    • Spring retainers are 2" high
    • Double lip dirt seal
    • 24.4" extended
    • 16.2" collapsed
  • BSB Manufacturing 4047A-7053 Replacment Adjustable Panhard Bolt
    BSB Manufacturing 4047A-7053 Replacment Adjustable Panhard Bolt
    (Part #91645531)
    x
                Panhard bolt for BSB adjustable pinion mount. Complete with one adjuster, bushing and bolts.
            
  • BSB Manufacturing 4169 Clamp-On Caliper Bracket
    BSB Manufacturing 4169 Clamp-On Caliper Bracket
    (Part #91641035)
    x
                Fits 3" axle tube and super lite style 3.5" mount center calipers. Used for swing arm birdcages. 
            
  • BSB Manufacturing 3015 Aluminum Throttle Pedal with Bearings
    BSB Manufacturing 3015 Aluminum Throttle Pedal with Bearings
    (Part #91655018)
    x
                Aluminum throttle pedal with bearings feature lightweight design. Positive response. Fits  tunnel in most cars. Adjustable ratio.
            
  • BSB Manufacturing 7500-2 Outlaw Bearing Coil Spring Slider, + 2 Inch
    BSB Manufacturing 7500-2 Outlaw Bearing Coil Spring Slider, + 2 Inch
    (Part #91045568)
    x
                

    New, state of the art bearing slider allows for less maitenance and higher load rating. Lighter design allows you to use 10" to 15" long, 5" O.D. springs. Handy pull pin design does away with the clumsy jam nut on the spring adjusting plate. Includes two 1/2" rod ends.

    • Can run 20x more side load than standard linear bearing
    • Has 5x the life of standard bearing 
    • Slotted plate for fast spring changes
    • Spring retainers are 2" high
    • Double lip dirt seal
    • 25.8" extended
    • 17.6" collapsed
  • BSB Manufacturing 7036 Adjustable Steel Panhard Mount for 9 Inch Ford
    BSB Manufacturing 7036 Adjustable Steel Panhard Mount for 9 Inch Ford
    (Part #91645000)
    x
                This steel panhard mount is designed to fit the popular 9" Ford rear end pinion support. The adjustable 3/4" stud allows 2-1/2" of travel and can be switched to either side. Hardware included. 
            

Filter

"BSB Manufacturing" Page 1 of 3

Page 1 of 3

  • BSB Manufacturing 4047S Pinion Mount Replacement Adjustable Bolt
    BSB Manufacturing 4047S Pinion Mount Replacement Adjustable Bolt
    (Part #9164047S)
    x
                Replacement adjustable bolt for BSB Mfg. quick change and 9" Ford steel pinion plate panhard bar mounts.
            
  • BSB Manufacturing 6650 6650 5 Inch Coilover Kit
    BSB Manufacturing 6650 6650 5 Inch Coilover Kit
    (Part #91046240)
    x
                
    • For Bilstein or QA1 shocks utilizing 5" OD springs
    • Threaded tube has scale on both sides for easy and fast setting
    • Slotted top cup with quick release for fast spring changes
    • Cross pin allows for easy adjustment
  • BSB Manufacturing 3027-20, Aluminum Panhard Mount
    BSB Manufacturing 3027-20, Aluminum Panhard Mount
    (Part #91645497)
    x
                This aluminum panhard mount fits 2" square tubing 5" C to C on 3/4-10 holes. Standard for most. Aluminum. 
            
  • BSB Manufacturing 3023 Aluminum Upper Inner Cross Shaft
    BSB Manufacturing 3023 Aluminum Upper Inner Cross Shaft
    (Part #91034355)
    x
                This aluminum cross shaft is used for making adjustable A-arms. Measures 6" center to center holes. Old style, which registers on the inboard side of the A-arm mount tabs.  Mounting holes on end for heims are 5/8".
            
  • BSB Manufacturing 7650-5 Replacement Double Pullbar Bushing
    BSB Manufacturing 7650-5 Replacement Double Pullbar Bushing
    (Part #91045518)
    x
                
    • Replacement double bushing for part pullbar part #91025116
    • Red is medium and blue is soft
    • 3.330" O.D.
    • .750" I.D.
    • 5.0" tall
  • BSB Manufacturing 7650-12 Replacement Poly-Bushings with Washer
    BSB Manufacturing 7650-12 Replacement Poly-Bushings with Washer
    (Part #91045517)
    x
                
    • Replacement poly-bushing for part pullbar part #91025116
    • Red is medium and blue is soft
    • 3.330" O.D.
    • .750" I.D.
    • 2.500" tall
    • Set includes 2 bushings plus a single washer
  • BSB Manufacturing 4210-9 Shock Mount for Billet Birdcages
    BSB Manufacturing 4210-9 Shock Mount for Billet Birdcages
    (Part #91045535)
    x
                This aluminum shock mount fits our billet birdcages. Turns the shocks end parallel and prevents  breaking off the shock. This assembly features a 6.0" and 7.0"  shock drop. The mounting bolt center for link mounting is  1.75". Mounting holes are 4 on top and 4 below with 1.00" center to  center measurements.
            
  • BSB Manufacturing 7036 Adjustable Steel Panhard Mount for 9 Inch Ford
    BSB Manufacturing 7036 Adjustable Steel Panhard Mount for 9 Inch Ford
    (Part #91645000)
    x
                This steel panhard mount is designed to fit the popular 9" Ford rear end pinion support. The adjustable 3/4" stud allows 2-1/2" of travel and can be switched to either side. Hardware included. 
            
  • BSB Manufacturing 7402 Shock Stud for Deluxe Steel Birdcage
    BSB Manufacturing 7402 Shock Stud for Deluxe Steel Birdcage
    (Part #91045557)
    x
                

    Replacement shock stud for deluxe steel birdcage.

  • BSB Manufacturing 7518 Outlaw Slider Rebuild Kit, Standard Length
    BSB Manufacturing 7518 Outlaw Slider Rebuild Kit, Standard Length
    (Part #91045566)
    x
                

    Kit contains 2 snap rings, 1 end seal, 1 body bushing, 1 notched shaft bushing, 1 lock nut, 1 travel indicator, and 1 shaft. Shaft measures 12-7/8" total or 11-3/8" not including the threads.

     

  • BSB Manufacturing 7043 Extra Long Panhard Bar
    BSB Manufacturing 7043 Extra Long Panhard Bar
    (Part #91645580)
    x
                This extra long panhard bar only has one end installed allowing you to custom fit for your car.  Has 3/4" rod ends and is 30" center to center. 
            
  • BSB Manufacturing 7038 Steel Panhard Bar for Quick Change
    BSB Manufacturing 7038 Steel Panhard Bar for Quick Change
    (Part #91645001)
    x
                

    If you have a Winters or Franklin quick change in your modified, you will need one of these. The 3/4" adjustable stud can be moved to either side, and give you 2-1/2" of adjustability per side.

    Hardware included.  

Goto Previous PagePrevious Page
1 2 3