Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 9

Products

Hood

Shop Body At Speedway Motors

When it comes to your cars body, Speedway Motors has you covered - literally. We stock the safest roll cages available along with the replacement body panels, bumpers, and nose pieces for the dirt racer. We haven't forgotten our Street Rodders either! We stock hard to find fiberglass bodies and fenders for your street rod as well as the seats, gauges, and mirrors to round out your interior.

Featured Products
  • 1932 Ford Fiberglass Hood, Stock Length
    1932 Ford Fiberglass Hood, Stock Length
    (Part #9003213)
    x
                One piece fiberglass hood with side flange. Top only, no sides. This is an outer skin only and will require fabrication and additional mounting hardware. You may be required to obtain original components for your application. Features a glossy gelcoat finish that is ready for paint preparations. The hood may require some trimming to fit your body and to achieve your desired  panel gaps.      

    Ships UPS oversize.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Stainless Steel Hood Props
    $29.99
    Product Rating: 4.25 Stars
    Stainless Steel Hood Props
    (Part #91104025)
    x
                With rubber coated short and long arms for 1928-1936 Ford and others. Polished, includes all hardware.
            
  • Rubber Hood Latch
    $6.99
    Product Rating: 4.46 Stars
    Rubber Hood Latch
    (Part #91007315)
    x
                Quick release, fast positive latching. Strong, self aligning hold down. 5" tall.
            
  • Hood Backing Plate
    $5.99
    Hood Backing Plate
    (Part #94054015)
    x
                
    • Use to fit "over the down tube" hoods securely on the car
    • Just reivet on to car, add fastener springs
    • Universal application, works with any style chassis
  • Standard Radiator Wing, Chrome
    Standard Radiator Wing, Chrome
    (Part #91615813)
    x
                Makes a great decoration for radiators! Measures 7-1/2" wide.
            
  • Eagle Motorsports In-Rail Sprint Car Hood
    New
    Eagle Motorsports In-Rail Sprint Car Hood
    (Part #9405602)
    x
                Eagle Motorsports factory-built component. These fiberglass sprint car hoods from Eagle Motorsports feature a sleek aero-inspired two piece design and they provide adequate clearance for any oil tank, radiator or air box. These hoods fit between the rails.
    • Sleek aero-inspired two piece design
    • Provides adequate clearance for any oil tank, radiator or air box
    • Seals engine compartment from debris
    • Fiberglass construction, gel coat finish
    • Saldana style
    • Choose from black or white finish
    • Works with in-rail nose (940-5605) and cowl (940-5609)
  • 1932 Ford Cowl Vent Hinge Kit
    1932 Ford Cowl Vent Hinge Kit
    (Part #91054700)
    x
                

    This cowl vent kit is a complete kit for 1932 Ford, with vent hinge, ratchet and spring.  These steel kits allow to use your original air vent as intended.

    • Kit for 1932 Ford
    • Vent hinge, ratchet and spring
    • Steel kits
  • Carbon Fiber Look Hoop Scoop
    $54.99
    Carbon Fiber Look Hoop Scoop
    (Part #91054050)
    x
                

    It may look like carbon fiber but it's actually made of plastic. For 14" air cleaners.

    Measures 19" wide, 14" long and 3-1/2" tall.

Filter

"Body, Hood" Page 1 of 9

Page 1 of 9

  • Shelby GT 500 Hood Scoop
    $89.99
    Shelby GT 500 Hood Scoop
    (Part #9001355)
    x
                Reproduction of the Shelby Mustang GT500 hood scoop. This universal hood scoop is made of heavy duty fiberglass for both street and race applications. Designed for easy installation, our universal hood scoops feature a glossy gelcoat finish and are ready for paint preparations. 

    This is a universal hood scoop and will work for multiple applications, but will require some fitting and body work. Fiberglass and body filler would be required to make a perfect installation.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.

  • Oil Cooler Scoop, Carbon Fiber Look, 7 Inch Wide x 11 Inch Deep
    Oil Cooler Scoop, Carbon Fiber Look, 7 Inch Wide x 11 Inch Deep
    (Part #91015184)
    x
                Dominator air scoop for oil coolers. Plastic carbon fiber "look."
            
  • 1932 Ford Hood Latch, Black
    $3.99
    Product Rating: 4.50 Stars
    1932 Ford Hood Latch, Black
    (Part #91132501)
    x
                

    This is a reproduction rams horn handle for 1932 Fords. The latch comes with the hood side catch and all necessary hardware as well.

    • Overall Height: 4"
    • Spring loaded
    • Reproduction for 1932 Fords 
    • Includes hood side catch and hardware
  • Vintage Outlaw Style Sprint Car Fiberglass Hood
    Vintage Outlaw Style Sprint Car Fiberglass Hood
    (Part #9009202)
    x
                

    Speedway Motors offers a complete selection of classic Outlaw style sprint car fiberglass body pieces. All fiberglass comes from Speedway's own fiberglass shop located in Lincoln, Nebraska, U.S.A. 

    Vintage fiberglass parts are special order items, and are NOT RETURNABLE.

    This product is made to order - quantities may vary. Please allow six to eight weeks lead time.

  • Carbon Fiber Look Hoop Scoop
    $54.99
    Carbon Fiber Look Hoop Scoop
    (Part #91054050)
    x
                

    It may look like carbon fiber but it's actually made of plastic. For 14" air cleaners.

    Measures 19" wide, 14" long and 3-1/2" tall.

  • ZL-1 Corvette Fiberglass Hood Scoop
    ZL-1 Corvette Fiberglass Hood Scoop
    (Part #9001373)
    x
                

    Universal hood scoop made of heavy duty fiberglass for both street and race applications. Designed for easy installation, our universal hood scoops feature a glossy gelcoat finish and are ready for paint preparations. Commonly used as a gasser style hood scoop.

    Ships UPS oversize.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.

  • Pro Stock Hood Scoop, 40 x 23-1/2 x 4-1/2 Inch
    Pro Stock Hood Scoop, 40 x 23-1/2 x 4-1/2 Inch
    (Part #9001362)
    x
                Universal hood scoop made of heavy duty fiberglass for both street and race applications. Designed for easy installation, our universal hood scoops feature a glossy gelcoat finish and are ready for paint preparations. Commonly used as a gasser style hood scoop.

    NOTE: Scoop is shipped filled. Builder/installer will need to cut front air-entry hole as necessary. 

    Ships UPS oversize. This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Pro Stock Hood Scoop, 32 x 21-1/2 x 5-1/2 Inch
    Pro Stock Hood Scoop, 32 x 21-1/2 x 5-1/2 Inch
    (Part #9001363)
    x
                Universal hood scoop made of heavy duty fiberglass for both street and race applications. Designed for easy installation, our universal hood scoops feature a glossy gelcoat finish and are ready for paint preparations. 

    Ships UPS oversize.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1932 Ford Fiberglass Hood, 5/8 Inch Longer
    1932 Ford Fiberglass Hood, 5/8 Inch Longer
    (Part #97693108)
    x
                One piece fiberglass hood with side flange. Top only, no sides. This is an outer skin only and will require fabrication and additional mounting hardware. You may be required to obtain original components for your application. Features a glossy gelcoat finish that is ready for paint preparations.  The hood may require some trimming to fit your body and to achieve your desired  panel gaps.      

    Ships UPS oversize.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Quik-Latch Products QL-25-B Mini Quik-Latch Mounting Cup Bracket
    Quik-Latch Products QL-25-B Mini Quik-Latch Mounting Cup Bracket
    (Part #91007157)
    x
                

    Mounting cup for Mini Quik-Latch is used to mount the stud underneath the panel. Mounting cup can be easily riveted or bolted to the back side of any panel.

    Works great for:

    • T-Bucket bed covers
    • Hood pins
    • Deck lids
    • Air cleaner stud
    • Removeable body panels

    Note:  Photo at left is shown for installation reference only.

  • Utility Cable
    $9.99
    Product Rating: 5.00 Stars
    Utility Cable
    (Part #91126114)
    x
                This is a 6' control cable that can be used as a choke cable, hood or trunk release, and various other applications. The knob is approximately 1" in diameter with a satin finish.
            
  • Eagle Micro Hood, Raised Center
    Eagle Micro Hood, Raised Center
    (Part #9601517)
    x
                
    • Two piece design for easy access
  • Stallard 6500-1000B Mini Sprint Car 1000cc Fiberglass Rear Hood Piece
    Stallard 6500-1000B Mini Sprint Car 1000cc Fiberglass Rear Hood Piece
    (Part #96065001)
    x
                

    Speedway Motors offers a complete selection of Mini Sprint Car fiberglass body pieces.  These Micro/Mini Sprint hood pieces are Stallard factory built body components, available in quality fiberglass construction in either a white or black gel coat finish.

    • 26" long x 16" tall x 24" wide
    • For 1000cc mini sprint
    • Stallard factory built component
    • Fiberglass construction
    • Choose white or black gel coat finish

     

  • Hairpin Assortment - 150 Piece
    Hairpin Assortment - 150 Piece
    (Part #91005300)
    x
                
    • 6 assorted sizes
    • Comes with clear plastic case
  • Stingray Corvette Style Fiberglass Hood Scoop
    Stingray Corvette Style Fiberglass Hood Scoop
    (Part #9001375)
    x
                

    This universal Corvette Singray style hood scoop is made of heavy duty fiberglass and is suitable for both street and race applications. Designed for easy installation, Speedway hood scoops feature a glossy gelcoat finish and are ready for paint preparations.

    This universal hood scoop measures 22" from the outside of the flange to the outside of the the flange at the widest point. The length is 36" front to back, the height is 3" at the tallest point. Ships oversize UPS.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Eagle Micro Sprint 1 Piece Hood
    Eagle Micro Sprint 1 Piece Hood
    (Part #9601515)
    x
                
    • Sleek 1 piece design
    • Fits multiple applications
    • Fiberglass construction
  • Reverse Teardrop Hood Scoop
    $69.99
    Product Rating: 5.00 Stars
    Reverse Teardrop Hood Scoop
    (Part #9001360)
    x
                

    Universal hood scoop made of heavy duty fiberglass for both street and race applications. Designed for easy installation, our universal hood scoops feature a glossy gelcoat finish and are ready for paint preparations. Hood scoop has original ford Thunderbolt design in a classic mid-60's muscle car style.

    36" x 23-1/2" x 3-1/4"

    Ships UPS oversize.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Edmunds Style Midget Fiberglass Hood
    Edmunds Style Midget Fiberglass Hood
    (Part #9009322)
    x
                

    Speedway Motors offers a complete selection of classic Edmumds Midget fiberglass body pieces. All fiberglass comes from Speedway's own fiberglass shop located in Lincoln, Nebraska, U.S.A.

    Vintage fiberglass parts are special order items, and are NOT RETURNABLE.

    This product is made to order - quantities may vary. Please allow six to eight weeks lead time. 

  • Steel Hood Pin Kit with Q-Clips
    Steel Hood Pin Kit with Q-Clips
    (Part #5501017)
    x
                Hood pin kit contains two 1/2" chrome plated steel studs, two steel scuff plates, four nuts, and two flip-over Q-clip pins.
            
  • Oil Cooler Scoop, Carbon Fiber Look, 11 Inch Wide x 7 Inch Deep
    Oil Cooler Scoop, Carbon Fiber Look, 11 Inch Wide x 7 Inch Deep
    (Part #91015185)
    x
                Dominator air scoop for oil coolers. Plastic carbon fiber "look."
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 9