Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Body At Speedway Motors

When it comes to your cars body, Speedway Motors has you covered - literally. We stock the safest roll cages available along with the replacement body panels, bumpers, and nose pieces for the dirt racer. We haven't forgotten our Street Rodders either! We stock hard to find fiberglass bodies and fenders for your street rod as well as the seats, gauges, and mirrors to round out your interior.

"Body, Garage Sale" Page 1 of 16

  • Garage Sale - Auto Meter Pro-Comp Standard Ignition Tach
    Garage Sale
    Garage Sale - Auto Meter Pro-Comp Standard Ignition Tach
    (Part #1825610)
    x
                

    These Pro-Comp Auto Meter standard ignition tachs come in 3-3/4" diameter, Standard electric. See application chart for more information on options and applications.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

    Auto Meter Wiring Guide

    Pro Comp Tach Chart

    1825610 Instruction Sheet (PDF)

  • Garage Sale - Stainless Steel Hydraulic Trunk/Hood Opener, 60 Lb.
    Garage Sale
    Garage Sale - Stainless Steel Hydraulic Trunk/Hood Opener, 60 Lb.
    (Part #UP38084)
    x
                

    Stainless steel 60# replacement hydraulic trunk/hood opener that was designed for use with our Signature Series '32.  They are constructed of quality components and come 15 inches long.

    • Stainless steel
    • 60# replacement for Signature Series 32
    • 15" long
    • 8mm ball attachment points
    This is garage sale priced because it is missing the attachement parts.
     
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   
  • Garage Sale-Speedway Mustang II Crossmember-34-35 Chevy-STD-Economy
    Garage Sale
    Garage Sale-Speedway Mustang II Crossmember-34-35 Chevy-STD-Economy
    (Part #91034431)
    x
                

    These Speedway Mustang IFS kits for 1934-1935 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are all the special, hard-to-make brackets and mounts you will need to complete the installation, plus illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1934-1935 Chevy Standard car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with manual rack and pinion ONLY

    Choose from the crossmembers bel

  • Garage Sale - 1932 High Boy Rear Frame Cover For Speedway Bodies Only
    Garage Sale
    Garage Sale - 1932 High Boy Rear Frame Cover For Speedway Bodies Only
    (Part #UP17651)
    x
                

    These frame covers are garage sale priced because they have some chips in the gel coat and some scratches.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS


     

  • Heidts 1940-48 Chevy Mustang II Deluxe Crossmember
    Garage Sale
    Heidts 1940-48 Chevy Mustang II Deluxe Crossmember
    (Part #413103)
    x
                Please view the product's page for more information
            
  • Garage Sale - Stainless Steel Long Nerf Bar
    Garage Sale
    Garage Sale - Stainless Steel Long Nerf Bar
    (Part #91073070-L-PLN)
    x
                

    Fits Eagle, Maxim and other standard cars. Stainless steel.

     

    These bars are garage sale priced because they are new old stock.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 1934 Ford Front Bumper Brackets
    Garage Sale
    Garage Sale - 1934 Ford Front Bumper Brackets
    (Part #UP31771)
    x
                

    These front bumper brackets for 1934 Fords are reproductions of the originals and are of heavy duty steel construction.  They fit all models and are sold as a set of 4.

    • OEM replacements
    • 1934 Fords, all models
    • Heavy duty steel
    • Sold as a set of 4
    These brackets are garage sale priced because they have been bolted on and returned.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Garage Sale - 1930-31 Model A Fiberglass Firewall
    Garage Sale
    Garage Sale - 1930-31 Model A Fiberglass Firewall
    (Part #UP49968)
    x
                

    This is garage sale priced because it was roughed up in shipping.

    No Warranty, No Returns on Garage Sale Items   

     

    This fiberglass firewall features a 3-3/4" deep recession which will allow you to fit late model engines in your '30-'31 Ford Model A.

    Ships UPS Oversize. 

  • Garage Sale - 1932 Ford Grille Insert, Rodders Style
    Garage Sale
    Garage Sale - 1932 Ford Grille Insert, Rodders Style
    (Part #UP48770)
    x
                

    This grille shell is garage sale priced because it has scratches and scuffs around the edges.

     No Warranty, No Returns On Garage Sale Items

    This 1932 Ford grille insert is made from beautifully polished stainless steel. "Rodder style" inserts do not have a crank hole.  This measures approx. 27-3/8" tall and 17" wide.  The grille is retained in the shell with screws going horizontal into the shell through the shell flange.

    • Polished stainless steel
    • Rodder style
    • Does not feature crank hole
    • 27-3/8" tall
    • 17" wide

    Item Details

    Without crank hole.

     

  • Garage Sale - Total Performance 31 Windshield Frame, Closed
    Garage Sale
    Garage Sale - Total Performance 31 Windshield Frame, Closed
    (Part #715WF1031PL)
    x
                

    Total Performance square top 'T' windshield frames fit 27 fiberglass T-buckets. No glass or windshield rubber is included with our windshield frames. This frame measures 43-3/4" x 17-1/4".

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - Classic Instruments 1947-53 Chevy Pickup Gauge Sets
    Garage Sale
    Garage Sale - Classic Instruments 1947-53 Chevy Pickup Gauge Sets
    (Part #UP15670)
    x
                

    Classic Instruments built this package to easily replace the gauges in your '47-'53 Chevy pickup. With this kit you get your choice of gauge style along with two trim rings and mounting hardware. The gauges have a 140 mph electric speedometer, voltmeter, oil pressure, water temperature and fuel level. The fuel level gauge works with your stock '47-'53 0-30 ohm sending unit. 

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 1932 Ford Windshield Frame Lower Stanchion Kits, Stainless Steel
    Garage Sale
    Garage Sale - 1932 Ford Windshield Frame Lower Stanchion Kits, Stainless Steel
    (Part #UP48964)
    x
                

    These stanchions are garage sale priced because they have some scratches and pits in and under the polished finish. 

     No Warranty, No Returns On Garage Sale Items

    Lower stanchion kit for 1932 Ford Roadster/Phaeton windshields. Kit includes lower stanchions, rubber gaskets and hardware. Available in polished stainless steel finish.

    Wing nuts sold separately.

  • Garage Sale - Stallard 6500-1000A Mini Sprint Car 1000cc Fiberglass Front Hood Piece
    Garage Sale
    Garage Sale - Stallard 6500-1000A Mini Sprint Car 1000cc Fiberglass Front Hood Piece
    (Part #UP37397)
    x
                Please view the product's page for more information
            
  • Garage Sale - 1915-25 Model T Short Style Windshield Posts, Chrome
    Garage Sale
    Garage Sale - 1915-25 Model T Short Style Windshield Posts, Chrome
    (Part #91656231.GS1)
    x
                

    This item is garage sale priced because the chrome has some pitting in the finish.

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS**

     

    Short style Model T posts are brass castings with mounting bosses on the back side to permit a smooth, clean installation. Fits 1915-25 Ford Model T roadster bodies.

    916-56231 Instructions (PDF) 

  • Garage Sale - 1928-29 Ford Model A Windshield Posts, Polished Aluminum
    Garage Sale
    Garage Sale - 1928-29 Ford Model A Windshield Posts, Polished Aluminum
    (Part #UP27571)
    x
                

    These 1928-29 Ford Model A roadster windshield posts are a cast aluminum one-piece design. Length from end to windshield pivot stud hole is approximately 16-1/2". Length from end to end is approximately 18-3/4".

     

    These windshield posts are garage sale priced because they have pits and scratches in the finish. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Individual Shoulder Harness
    Garage Sale
    Garage Sale - Individual Shoulder Harness
    (Part #595434.GSBLK)
    x
                

    The SFI rating applied to this harness is no longer in use, so these cannot be used for sanctioned racing events.

     

    Date stamped November 2000. 

     

    Includes wrap around adjusters. 

     

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS** 

  • Garage Sale - Total Performance 27 T Left Rear Fenders
    Garage Sale
    Garage Sale - Total Performance 27 T Left Rear Fenders
    (Part #715B26272L)
    x
                Please view the product's page for more information
            
  • Garage Sale - 1932 Ford Front Fender, Left Side
    Garage Sale
    Garage Sale - 1932 Ford Front Fender, Left Side
    (Part #UP27990)
    x
                

    Made by skilled craftsmen in the USA! Our '32 Ford front fenders feature a smooth gelcoat finish.

     

    This fender is garage sale priced because it has scratches and a small crack from shipping. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Individual Shoulder Harness
    Garage Sale
    Garage Sale - Individual Shoulder Harness
    (Part #595434.GSBLU)
    x
                

    The SFI rating applied to this harness is no longer in use, so these cannot be used for sanctioned racing events.

     

    Date stamped April 2000. 

     

    Includes wrap around adjusters. 

     

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS** 

  • Garage Sale - Tru-Square Mini/Micro Sprint Rearend Alignment Tool, 2 Inch, 1-3/4 Inch Axle
    Garage Sale
    Garage Sale - Tru-Square Mini/Micro Sprint Rearend Alignment Tool, 2 Inch, 1-3/4 Inch Axle
    (Part #UP28521)
    x
                

    The Tru-Square tool clamps to the axle directly above the setup blocks, therefore the tool that is needed is determined by the overall diameter of the axle or axle spacer (if applicable) at this location.  Measure the diameter of your rear axle or the diameter of the spacer (if there is a spacer on the axle) directly above the set up blocks.

    Tru-Square Mini/Micro Sprint Rearend Alignment Tool

    • 2" (on both sides)
    • For 1-3/4 Inch Axle
    • Spacers and clamps

     

    This is garage sale priced because it is scratched.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - 1932 Lo-Boy Windshield Posts
    $229.99
    $299.99
    Garage Sale
    Garage Sale - 1932 Lo-Boy Windshield Posts
    (Part #UP47414)
    x
                

    These posts are garage sale priced because they have some dings and scuffs in the finish.  What you see is what you get. 

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

    These polished stainless steel windshield posts will give your roadster a smooth, clean look. Plus, installing this chopped windshield is a snap. Comes with post caps for a smooth, unique look.

    Fits Speedway Lo-Boy Roadster and 1932 Ford roadsters. For a nostalgic, original look use chopped windshield kit 974-56930 at right.

  • Garage Sale - 1932 Ford Grille Insert, Chopped
    Garage Sale
    Garage Sale - 1932 Ford Grille Insert, Chopped
    (Part #UP49893)
    x
                

    This grille insert is garage sale priced because some of the fins are loose and cut too short.  

      No Warranty, No Returns On Garage Sale Items

    This fully polished stainless steel 1932 Ford Lo-Boy grille insert is chopped 4-1/2" and has no crank hole. 23" tall and 17.5" at the widest point.  Please note that this insert is provided to be applicable and used in conjunction with the chopped grill shell # 974-51532 only.   Fitment is not guaranteed for any other grill shell application or brand other than # 974-51532

  • Garage Sale - Tribute T Windshield Frame
    $399.99
    $499.99
    Garage Sale
    Garage Sale - Tribute T Windshield Frame
    (Part #UP22233)
    x
                
    • For use with short posts - angled or straight
    • Fits Speedway 23 - T bodies
    • 39-5/8" Wide
     
    This is garage sale priced because it has been installed has a few minor light scratches.
     
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  
  • Garage Sale - 3 Piece Side Panel - LH Standard
    Garage Sale
    Garage Sale - 3 Piece Side Panel - LH Standard
    (Part #UP42036)
    x
                

    This side panel is garage sale priced because it has scratches and it is bent on the corners.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

    Eagle Motorsports/Schnee Chassis factory-built components. Access your fuel system with ease using these inter-locking panels. 1/4-turn fasten together design allows quick entry to the cockpit without fighting the header.

    • Allows for easy access of the fuel system
    • Interior locking panels
    • For standard rail cars
    • 40" long
    • Material Thickness: .60"
    • Aluminum, plain finish
    • Works with new Eagle Motorsports/Schnee Chassis cars
  • Garage Sale - J&J Sprint Car Replacement Short Nerf Bars
    Garage Sale
    Garage Sale - J&J Sprint Car Replacement Short Nerf Bars
    (Part #9401008)
    x
                

    Sprint car nerf bars can take a beating during the racing season. When it’s time to replace yours, be sure to choose a quality bar that fits your car, like this short stainless steel one from J&J Auto Racing

     

    • Replacement for a J&J chassis, but can be used with other chassis 
    • Stainless steel kick-off (nerf) bar for right side of car
    • Shorty style (normally for winged cars)

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Eagle Midget RH Armguard
    $89.99
    $109.99
    Garage Sale
    Garage Sale - Eagle Midget RH Armguard
    (Part #UP37765)
    x
                
    • Provides additional arm room
    • Reinforced with stiffening ribs
    • Adaptable to most cars
    • Fiberglass construction
     
    This is garage sale priced because it was damaged in shipping.
     
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   
  • Garage Sale - 3PC Left Side Panel
    $39.99
    $69.99
    Garage Sale
    Garage Sale - 3PC Left Side Panel
    (Part #UP30282)
    x
                

    Access your fuel system with ease using these inter-locking panels. quarter turn fastener together design allows quick entry to the cockpit without fighting the header.

    Panels are .035" thick and measure 33" long by 18.5" tall when it is all together.

     

    This is garage sale priced because it is missing one panel and is an older style.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Total Perfromance 27 T Right Rear Fenders
    Garage Sale
    Garage Sale - Total Perfromance 27 T Right Rear Fenders
    (Part #715B26272R)
    x
                

    Fiberglass 27 T bucket rear fenders. These have a black gel coating. Sold as a single side. Fenders are 19-7/8" tall x 61-1/2" on the curve and 9-5/8" wide.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - Outlaw Spoiler Fins
    $9.99
    $19.99
    Garage Sale
    Garage Sale - Outlaw Spoiler Fins
    (Part #91299998)
    x
                

    Three aluminum spoiler fins. These are 1/8 inch thick metal and measures 18 inches for the mounting surface.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - Auto Meter 3-3/4 Inch Oil Temp Gauge
    Garage Sale
    Garage Sale - Auto Meter 3-3/4 Inch Oil Temp Gauge
    (Part #1825511BP)
    x
                

    Features large face and fluorescent pointer.  Full sweep gauges maintain accurate readings.  Lightweight aluminum.  Includes mounting bracket.  140-340 degrees F.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Classic Instruments CH01ASLF 57 Chevy Gauge Set, Authentic Face Design
    Garage Sale
    Garage Sale - Classic Instruments CH01ASLF 57 Chevy Gauge Set, Authentic Face Design
    (Part #UP47052)
    x
                Please view the product's page for more information
            
  • Garage Sale - JAZ 120-490-03 Professional Double Wrap 16-1/2 Inch Seat
    Garage Sale
    Garage Sale - JAZ 120-490-03 Professional Double Wrap 16-1/2 Inch Seat
    (Part #12049003)
    x
                

    This is garage sale priced because it has been discontinued. 

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

     

    • Cross break in seat back for more comfort
    • Aluminum extrusion welded to perimeter
    • Extra wide shoulder harness slot 
    • Double welded panels in key areas
    • .100" 5052 grade aluminum
    • Fully Tig. welded inside and out
    • Proper kick up in seat bottom
    • Available in straight or 20° lay back design 
    • Lightening holes to reduce weight

     

  • Garage Sale - 1932 Ford Windshield Frame Lower Stanchion Kit, Stainless Steel
    Garage Sale
    Garage Sale - 1932 Ford Windshield Frame Lower Stanchion Kit, Stainless Steel
    (Part #UP41217)
    x
                

    These lower stanchions are garage sale priced because they have pits and scratches.  These do not include the gaskets.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

    Lower stanchion kit for 1932 Ford Roadster/Phaeton windshields. Kit includes lower stanchions and hardware. Available in polished stainless steel finish.

    Wing nuts sold separately.

  • Garage Sale - 1935-36 Ford Closed Car Windshield Frame, Plain
    Garage Sale
    Garage Sale - 1935-36 Ford Closed Car Windshield Frame, Plain
    (Part #UP31885)
    x
                

    Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Steel reproduction windshield for '35-'36 Ford closed cars (not pick-up trucks). Frame has two sets of 3 holes on the top for the hinges and one pair of holes on the bottom for the tip-out latch mechanism. Available in plain steel finish.

    • 44-1/2" wide
    • 14-1/4" tall

    Note: No glass or windshield rubber included with our windshield frames.

     

    This windshield frame is garage sale priced because it has dings and scuffs from shipping. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - 1926-1927 Model T Windshield Posts, 4 Inch Chopped, Chrome
    Garage Sale
    Garage Sale - 1926-1927 Model T Windshield Posts, 4 Inch Chopped, Chrome
    (Part #UP37005)
    x
                

    These 1926-27 Ford Model T 4" chopped posts are designed for use with Mr. Roadster® chopped windshield frame. One-piece design.

    From the bottom most tip to the center of the pivot hole is 20-1/4".

     

    This is garage sale priced because one end is bent and they have some minor defects.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - Stewart Warner 284-C72 HD 2-1/16 In. Oil Temperature Gauge, Mechanical
    Garage Sale
    Garage Sale - Stewart Warner 284-C72 HD 2-1/16 In. Oil Temperature Gauge, Mechanical
    (Part #665284C.GS)
    x
                Please view the product's page for more information
            
  • Garage Sale - Sportsman Seat Upholstery Kit
    Garage Sale
    Garage Sale - Sportsman Seat Upholstery Kit
    (Part #9097006.GS)
    x
                

    This seat cover is garage sale priced because the seam is coming apart on the lower left of the cover. 

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

    Rugged black vinyl quilted upholstery for Sportsman economy fiberglass seat 900-7006.

  • Garage Sale - Speedway Slip-Stream Hood With Inlets
    Garage Sale
    Garage Sale - Speedway Slip-Stream Hood With Inlets
    (Part #UP8808)
    x
                

    This is garage sale priced because it has a stress crack on the front and it is torn on the left rear.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS    

     

    • Fits between the down tubes
    • Track proven with the World of Outlaws and ASCS
    • Offset inlets allow the air filter to remain free from debris
    • Fiberglass construction, white or black gel coat finish
    • Universal applications, works with any chassis
    • Trim-to-fit as necessary
    • Pair with 940-54022-COLOR nose 
  • Garage Sale - Eagle Chassis Right Arm Guard
    Garage Sale
    Garage Sale - Eagle Chassis Right Arm Guard
    (Part #94054003GS)
    x
                Right arm guard. Plain aluminum panel by Eagle.

    This one got a little wrinked up in shipping.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - 14.5" Aluminum Seat with 20 Degree Layback
    Garage Sale
    Garage Sale - 14.5" Aluminum Seat with 20 Degree Layback
    (Part #91070064)
    x
                Hand rolled edge, flanged lightening holes and welded rib brace makes it very stiff.     

    34" tall, 13" deep and only 9.5 lbs.  20° layback, 1 1/2" wrap for stock cars and modifieds.   14 1/2" wide  

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

Goto Previous PagePrevious Page
1 2 3 4 5 ... 16