Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

When it comes to your cars body, Speedway Motors has you covered - literally. We stock the safest roll cages available along with the replacement body panels, bumpers, and nose pieces for the dirt racer. We haven't forgotten our Street Rodders either! We stock hard to find fiberglass bodies and fenders for your street rod as well as the seats, gauges, and mirrors to round out your interior.

"Body, Doors" Page 1 of 4

  • 1932 Ford Interior Door Escutcheon
    1932 Ford Interior Door Escutcheon
    x
                These are used on both the door handles and window crank handles.
    • Polished stainless steel
    • Inside handle escutcheons for 1932 passenger cars
    • Sold Each
  • Base Door Panel Kit
    $149.99
    Base Door Panel Kit
    x
                Design your own custom door panel with Hagan panel components. This kit comes with 4 black panel boards that are 39" x 32" which include 50 inline panel clips and a How-To video. Base boards are made of dense 1/8" water-resistant cardboard.
            
  • Door Props
    $49.99
    Product Rating: 3.00 Stars
    Door Props
    x
                

    This door prop kit fits between your striker bolt and bear jaw latch to hold the door open at car shows or for maintenance and cleaning.

    17" long (where they snap onto the door latch pins).

  • 1932 Ford Roadster Inside Door Handle Assembly
    1932 Ford Roadster Inside Door Handle Assembly
    x
                

    These inside door handle kits are designed for 1932 Ford Roadsters. They feature a beautifully chromed finish and are a complete set for 2 doors.

    • 1932 Ford Roadsters
    • Chromed finish
    • Complete set for 2 doors
  • Linear Actuator Aluminum Mounting Bracket, 1-1/2 x 1-1/2 Inch
    Linear Actuator Aluminum Mounting Bracket, 1-1/2 x 1-1/2 Inch
    x
                

    These billet aluminum mounting brackets are for our Linear Actuator 910-64290. They are designed to mount your linear actuators to hoods, trunks, etc. on either flat or angled surfaces. Solid aluminum construction provides the greatest strength possible while remaining a great looking piece. The brackets are a satin finish, but can be polished to a bright shine.  Sold individually - you may need two mounts (one for each end of the actuator).  Includes bracket and three securing screws.

    • Billet aluminum
    • Satin finish
    • Mount linear actuators to hoods, trunks, etc.
    • Mount to either flat or angled surfaces
    • Sold individually - may need one mount for each end
    • Works with Linear Actuator 910-64290
    • Includes bracket and three securing screws

    NOTE: The vendor no longer includes the mounting plate as pictured in previous catalogs.

  • Universal Vent Window Removal Set
    Universal Vent Window Removal Set
    x
                

    Replace worn out, rusted, or missing window channels and convert to one piece windows.

    • Channels are adjustable
    • Welding required
    • Channels are 18" long, 9/16" wide, 3/8" tall
    910-01931 Instructions (PDF)
  • 1928-34 Ford Closed Car Outside Door Handle Pads
    1928-34 Ford Closed Car Outside Door Handle Pads
    x
                

    These exterior door handle pad gaskets are for 1928-31 Model A and 1932-34 Ford closed car door handles. They are made from strong rubber material and fit between the door and the door handle base to protect your door as well as securing a tight seal.

    Sold as a pair.

  • Budget Hinges, Steel
    $49.99
    Product Rating: 4.75 Stars
    Budget Hinges, Steel
    x
                

    Our bare finish, cast steel 1-5/8" by 3-3/4" two tongue design hinges include nylon washers. Sold in pairs (enough to do one door). Ideally suited for Model T, or lighter-weight door applications.

    Designed to be altered and drilled for various applications.

  • Cage Nut for Slim-Line Bear Jaw Latch
    Cage Nut for Slim-Line Bear Jaw Latch
    x
                

    This cage nut is for our slim-line bear jaw door latch. Adjustment range is 1/8" from center up, down, in, or out.

  • Striker Pin for Standard Bear Jaw Door Latch
    Striker Pin for Standard Bear Jaw Door Latch
    x
                

    This striker bolt works with Speedway Standard Bear Jaw door latches and has a 7/16"-14 thread. This strike pin does not fit "slimline" bear jaw latches.

  • 1949-1964 Early Chevy Car Interior Window Hand Cranks
    1949-1964 Early Chevy Car Interior Window Hand Cranks
    x
                

    These reproduction handles and cranks are what you need to finish up your pride and joy. They feature a beautiful chrome finish, classic styling, and secure around window regulator with original style retaining clip.

    • Chrome Side Window Crank
    • 1949-60 Full Size Passenger Car (Exclusive 1958 Impala)
    • 1961-64 Biscayne
  • Lexan Decal Protection Kit
    $49.99
    Product Rating: 5.00 Stars
    Lexan Decal Protection Kit
    x
                Protect your decals or wrap. Includes three 4" x 72" Lexan panels. 
            
  • Tear Drop Arm Rest Set
    $174.99
    Tear Drop Arm Rest Set
    x
                

    For the builder that wants to design a custom door panel. These arm rests are made out of a dense urethane material. Measures 16" long and comes with 16 gauge mount brackets, billet aluminum pulls and stainless hardware.

    Sold as a pair.

  • Bob Drake 01A-7004352 1940 Ford Center Dash Speaker Grille, Chrome
    Bob Drake 01A-7004352 1940 Ford Center Dash Speaker Grille, Chrome
    x
                

    This reproduction 1940 Ford speaker grille is exactly like original. They are easy to install and come in a beautiful chrome plated finish.  OEM replacement to ensure proper fitment.

    • Chrome finish
    • Exact die cast reproduction of original
    • 1940 Fords

     

  • 1981-1988 Monte Carlo SS Steel Door Skin
    1981-1988 Monte Carlo SS Steel Door Skin
    x
                

    These 1981-1988 Monte Carlo SS stock car racing body panels are made of 22 gauge steel. These are not OEM panels - they are fabricated for offroad, circle track racing only. Specify left or right side when ordering these door skins.

    Overall measurements are 62" x 26". These door skins are white in color, but are pictured black on our website.

     

  • Classic Truck Door Sill Plates
    Classic Truck Door Sill Plates
    x
                Finish off the cabin of your classic truck in style with these great-looking polished billet aluminum door sill plates. The plates measure 33-1/4 inches long and are an exact fit for 1948-56 Ford and 1948-54 Chevy pickups.
            
  • Hagan Street Rods hdh2832 Triple Hood Opening Hinge
    Hagan Street Rods hdh2832 Triple Hood Opening Hinge
    x
                This is a slick hinge for three-piece street rod hoods. It lets you open the hood top from the left or right side, or take it off completely. The simple installation is mostly bolt-in, but does require some welding. Works on 1928-32 cars and trucks using three-piece hoods.
            
  • Replacment Door Bar Kit for Roll Cage
    Replacment Door Bar Kit for Roll Cage
    x
                

    Take a hit to your door? No problem. Just order this kit which includes enough 1-3/4" diameter, .104" wall HREW mild steel tubing to replace your door bar.

    • Not assembled
    • Enough bars for one side of the car
    • Total length is 45" on the long end and 32" on the short
    • 7" wide and 7" from the elbow to the end
  • Standard Bear Jaw Door Latch
    $16.99
    Product Rating: 5.00 Stars
    Standard Bear Jaw Door Latch
    x
                

    Excellent modern replacement latch for all passenger car bodies. Modification to door is required to install latches. Choose left hand or right hand.

  • 1928-33 Ford Chrome Inside Door Handle
    1928-33 Ford Chrome Inside Door Handle
    x
                

    These chrome reproduction interior door handles fit 1928-31 Model A and 1932-33 Ford open cars, (except 1932), either left or right side.  They feature a screw cap to cover the attachment shaft.

    • Chrome finish 
    • High quality steel material
    • Overall Length: 3.88"
    • Overall Width: 1.12"
    • Overall Height: .55"
    • Overall Thickness: .44"

    Fits a 5/16" square shaft like the open-car handles for '28-'33 Fords (911-25203).

  • Deluxe Shaved Door Handle Remote Entry Kit
    Deluxe Shaved Door Handle Remote Entry Kit
    x
                If your street rod doesn't have a remote entry system, you don't know what you're missing. This kit features a premium SPAL shaved door kit with Speedway billet door jam wire looms for a clean installation.   
    • Two massive 40 lb. pull solenoids
    • Two 4-button transmitters
    • One 7-channel receiver
    • Two 1/2" billet door looms
    • Two door poppers
    • Hardware required for hookup
    • Channel one and two have on-board relays built into the box. These channels are used to control door pop solenoids. All the other channels will need to have external relays added for function

    910-69235 Instructions (PDF)

  • Slim-Line Bear Jaw Door Latch
    Slim-Line Bear Jaw Door Latch
    x
                

    Same basic design as our standard 'Bear Jaw' door latches except smaller and more compact.  Measures 3-7/8" x 1-1/4" x 3/4".

    The latch pictured above would be a LH side (drivers side) for a conventional door. If you are using this on a suicide door, this would be for a RH side (passenger side) door. 

  • 1949-1964 Early Chevy Car Interior Door Handles
    1949-1964 Early Chevy Car Interior Door Handles
    x
                

    These reproduction handles and cranks are what you need to finish up your pride and joy. They feature a beautiful chrome plated zinc finish, classic styling, and secure around door latch regulator with original style retaining clip.

    • Chrome Plated Zinc
    • 1949-1964 Full Size Passenger Car (except 1949-1952 wagons & 1958-1960 Impalas)
    • 1961-1964 Biscayne
  • 1930-1931 Ford Model A Closed Car Outside Locking Door Handles
    1930-1931 Ford Model A Closed Car Outside Locking Door Handles
    x
                

    These locking 1930-1931 curved mount exterior door handles from Vintique fit either left or right side. They secure to the car door with two screws and a 5/16" attachment shaft.  These door handles are the perfect finishing touch to your stock or modified Model A. 

    • Chrome plated steel
    • Locking with keys included
    • left and right are the same
    • High quality steel material

     

  • Universal Door Poppers
    $21.99
    Product Rating: 4.50 Stars
    Universal Door Poppers
    x
                

    These spring-loaded door poppers install in a 5/8" hole. Double adjustable washer nuts for hassle-free adjustment. Door poppers are sold individually (each).

    • Total Length:  3-1/16"
    • Total Compressed Length:  2-3/4"
    • 5/8" stud is 2-1/4" long

     

  • Mounting Plates for Bear Jaw Latches
    Mounting Plates for Bear Jaw Latches
    x
                It can be a real pain to install bear jaw style latches. Wouldn't it be nice if you had plates that already had the correct holes cut out so you could just weld or glass them in? We've got you covered with these painted steel plates. 
            
  • Oval Designed Release Knobs
    $39.99
    Product Rating: 3.50 Stars
    Oval Designed Release Knobs
    x
                Polished oval release knobs designed to work with a bear jaw latch allowing you to open your doors from the inside with one touch.
            
  • Budget Hinges - Stainless Steel
    $79.99
    $100.00
    Budget Hinges - Stainless Steel
    x
                
    • 1-5/8" wide with 3" tongue
    • Drill and paint to suit
  • Universal Door Latches
    $19.99
    Product Rating: 5.00 Stars
    Universal Door Latches
    x
                Simple, rugged latch and handle  assembly. Perfect for your T-bucket. Choose left or right hand side.
            
  • 1928-31 Ford Closed Car Striker Plate
    1928-31 Ford Closed Car Striker Plate
    x
                

    Striker plate for 1928-1931 Ford closed passenger cars. Works well with universal latch 910-52851.

  • Banjo Window Crank
    $129.99
    Product Rating: 5.00 Stars
    Banjo Window Crank
    x
                

    Make your interior as distinctive as the rest of your street rod with these banjo-style window cranks - the perfect complement to your banjo steering wheel. Each crank is laser cut from stainless steel then polished to a beautiful luster. The base, cap, and knobs are machined billet aluminum and are fully polished as well.

    Screw cover caps house a strong magnet that attaches itself to the heads of the mounting screws offering a secure fit while allowing you to remove it later without marring the part.

    These handles are designed to fit square shaft that is 3/8" X 3/8" but feature 3 set screws to help maintain fit to most shafts.

  • 1932 Ford Chrome Inside Door Handle
    1932 Ford Chrome Inside Door Handle
    x
                These chrome interior door handles fit 1932 Fords, either left or right side. They feature a roll pin to secure to the attachment shaft and are the perfect finishing touch to your  stock or modified 1932 Ford. 
    • Chrome finish 
    • High quality cast zinc material
    • Inside door handle for all 1932 Ford passenger cars except roadster and phaetons
    • Sold Each
  • 1928-1933 Ford Open Car Outside Door Handle
    1928-1933 Ford Open Car Outside Door Handle
    x
                

    These chrome reproduction exterior door handles fit 1928-1931 Model A and 1932-1933 Ford Roadster and Phaeton open top cars, either left or right side. They secure to the car door with two screws and a 5/16" attachment shaft.

    • Chrome plated steel
    • Left and right are the same
    • High quality steel material
  • Door Handles, Cut-off Design
    $89.99
    Door Handles, Cut-off Design
    x
                Give your car's cabin a personal touch with these aluminum interior door handles. Three stylish designs are available, each with a brushed aluminum finish.
            
  • 1934 Ford Roadster Outside Door Handles
    1934 Ford Roadster Outside Door Handles
    x
                

    These are replacement exterior door handles for the 1934 Ford roadsters.  They are stock style and come in a chrome plated finish.

    • Stock replacement
    • Fits 1934 open cars, 1934 Ford roadsters
    • Chrome plated
    • Sold in pairs

    Don't forget to include new gasket seal handle pads (751B702356BS) with these door handles.

  • 1932 5-Window Coupe Door Latch Assembly, RH, Original Style
    1932 5-Window Coupe Door Latch Assembly, RH, Original Style
    x
                The wait is over! EXACT copy of the original 1932 Ford Five window coupe passenger's door latch.
    • Original style latch WITH lock receiver
    • Precision stampings with original design mechanism.
    • Includes the inside door handle shaft remote (triangle plate) and remote rod
    • Key Lock Cylinders Not Included
    • RH & LH Sold separately
  • 1932-36 Ford Roadster Female Door Latch Dovetails, Black
    1932-36 Ford Roadster Female Door Latch Dovetails, Black
    x
                

    This pair of female dovetails fit 1932-36 Ford roadsters and phaetons.

    • 1932-36 Ford roadsters and phaetons
    • Steel
    • Sold as a pair

    Dont forget to include our male dovetails (7514035577BSS) in your order.

  • Billet Car Hood Prop
    $54.99
    Billet Car Hood Prop
    x
                Billet stops hold your hood up while doing service work. With a little imagination can be used for hinges also.  
    • Hinge measures 17-1/2" overall length from tip to tip at mount hole centers
    • Center pivot to mount hole centers at end are 8.75"
  • Speedway 1953-56 Ford Pickup Bolt-In Bear-Jaw Door Latches
    Speedway 1953-56 Ford Pickup Bolt-In Bear-Jaw Door Latches
    x
                

    Never before has it been so easy to upgrade your classic truck with secure, easy operating bear jaw latches! These bolt-in kits require no welding, just minor trimming that will be covered with the supplied installation plate. Kits are designed to retain your stock exterior and interior door handles and lock cylinders. Stainless steel striker bolts are standard, and each kit includes necessary hardware, templates and instructions.

    Made in the U.S.A.

    910-3041 Instructions (PDF)

  • Heavy Duty Door Hinge & Latch Kit
    Heavy Duty Door Hinge & Latch Kit
    x
                Steel 1932 door hinge kit (4 hinges), double pin capture system latch, striker plates and all mounting hardware. 
            
Goto Previous PagePrevious Page
1 2 3 4