Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Apparel and Gifts At Speedway Motors

Need gift ideas for the car enthusiast in your life? Look no further! Speedway Motors has everything they want, from cool apparel to useful books, videos and DVDs. Don't forget signs and accessories for the garage too! Man or woman, young or old, any enthusiast will be happy with an automotive gift from Speedway.

"Apparel and Gifts, DVD" Page 1 of 1

New (0)

On Sale (0)

Garage Sale (0)

  • DVD - Richmond Gear Installation Instruction
    DVD - Richmond Gear Installation Instruction
    x
                Shows you how to properly install ring and pinion gear sets. Packed with information for correct installation procedures. 
            
  • Steve Smith Autosports S296 Book - Midget Chassis Technology
    Steve Smith Autosports S296 Book - Midget Chassis Technology
    x
                        This book covers both dirt and asphalt midgets and covers all aspects of chassis set-up and tuning. Also includes Ford Focus midget tech.                                                
            
  • DVD - Pinstriping Techniques
    $24.99
    DVD - Pinstriping Techniques
    x
                Sometimes seeing a picture of someone pinstriping just doesn't quite let you understand the technique used. This is a "seeing is believing" DVD that covers what a book can't. Runtime is 94 minutes.  
            
  • Holley 36-378 Carburetor Installation & Tuning DVD
    Holley 36-378 Carburetor Installation & Tuning DVD
    x
                

    Two hours of everything you ever wanted to know about Holley Carburetors Virtual tours, exploded views, step–by–step under the hood installation including transmission kickdowns, advanced tuning, & troubleshooting. It is interactive, so you can easily find the chapters you need.

    • Virtual tours of 4160 vacuum secondary carbs, 4150 vacuum & mechanical secondary, as well as 4165 & 4175 spread bores.
    • Complete under-hood installation video covering various throttle hook-ups, transmission kick-downs, chokes, quick start tuning initial settings, manifold compatibility etc.
    • Complete advanced tuning section covering every tunable part of a Holley carburetor
    • Trouble shooting section covering bogs, hesitations, cold & hot starting, flooding, misses, backfires, rough idle etc.
    • Additional engine trouble shooting section for issues commonly mistaken as carburetor problems.
    • Bonus section including intake manifold installation & distributor install/ignition hook-up.
    • Glossary of terms & tools sections

     

  • Steve Smith Autosports V191 DVD - Street Stock Chassis Set-Up
    Steve Smith Autosports V191 DVD - Street Stock Chassis Set-Up
    x
                    Covers basic chassis design and fabrication tips, complete suspension set-up, selecting springs and shocks, front end alignment, scaling the car and adjusting weight distribution, working with spring spacers, setting stager, adjusting car to track conditions, actual track testing sessions and more.  For dirt and paved tracks. DVD.
  • DVD - Understanding Cam & Valvetrain
    DVD - Understanding Cam & Valvetrain
    x
                This 93 minute long DVD shows you cam and valvetrain tips and installation. You will see things on this DVD you have never even thought of.  
            
  • DVD - Scratch Building A Fender
    DVD - Scratch Building A Fender
    x
                What do you do if you can't find a fender worth fixing or it costs more than you want to spend? Simple, build it yourself. This video will show you how. 119 minutes.  
            
  • Building a 600HP 383 Chevy on a Budget
    Building a 600HP 383 Chevy on a Budget
    x
                Have you ever wanted to build your own stroker small-block Chevy? Or maybe you’d like some advice on parts selection for building a strong small-block V8 for racing or street use. This how-to DVD has more than 7 hours of step-by-step instructions illustrating how to assemble a 600-horsepower, 383ci small-block Chevy on a real-world budget. Better yet, it shows all of the Speedway Motors part numbers used during the build – making it easy to identify the parts you need to build an engine for yourself! Detailed assembly tips and tricks from a seasoned engine builder will help guide even the novice through their own engine rebuild. This is a must-have DVD for anyone contemplating a stroker small-block engine build.    
            
  • DVD - Building The IMCA Modified
    DVD - Building The IMCA Modified
    x
                

    This DVD takes you from building an inexpensive jig, proper tube bending, suspension geometry and complete chassis construction. After you've built your modified, you will need the chassis DVD (237-C811) to make it competitive.


  • DVD - Power Building Videos, Heads, Porting and Valve Trains, 3 Disc Set
    DVD - Power Building Videos, Heads, Porting and Valve Trains, 3 Disc Set
    x
                Designed for the guy that isn't yet a pro engine builder, this Power Building Videos DVD set will take you step-by-step through the basics of the entire valve train, including many different types of cams (flat tappet, hydraulic roller, solid roller,), lifters, springs, push rods, various cast iron and aluminum heads and much, much more. You'll be shown how to read a cam card, and how to degree a cam. You'll also see what "lift", "duration", "overlap" and "lobe centers" mean, and how they affect your engine.
            
  • Steve Smith Autosports V182 DVD - Sprint Car Chassis Set-Up
    Steve Smith Autosports V182 DVD - Sprint Car Chassis Set-Up
    x
                      By Jimmy Sills. Covers blocking, squaring and aligning, birdcage timing,  choosing torsion bars and shocks, cross weight, at-the-track handling  adjustments, setting wings. Plus, chassis adjustments done on wheel scales to  show their effect. DVD.
  • Steve Smith Autosports C249 CD-ROM - Front Suspension Geometry Pro
    Steve Smith Autosports C249 CD-ROM - Front Suspension Geometry Pro
    x
                

    Combines photo-like graphics with the power of high-speed computer intelligence to give you clear and fast improvements to your front suspension. Analyzes and helps you to correct camber curve, side scrub, bump steer, caster curve and fore/aft suspension curve. The built-in analysis identifies problems for you then suggests specific items to improve your suspension geometry. Also includes static analysis of scrub radius, caster trail and roll center height and offset. Includes complete instructional book. 

    Designed for dirt oval, paved oval and road race cars. CD-ROM for Windows computers.

  • Covell Metalworking 1000-1 DVD - Shaping Aluminum
    Covell Metalworking 1000-1 DVD - Shaping Aluminum
    x
                

    Watch Ron go through every step of making a track roadster nose, demonstrating techniques suitable for making virtually any body panel. He starts with a station buck defining the shape, shows clearly how the patterns are made, then starts shaping each piece and finally joins them together. Annealing, mallet and sandbag rough shaping, hammer and dolly smoothing, metal finishing, and both oxy-acetylene and TIG welding are covered in depth. If you’ve never seen metal shaped by hand, you may be astounded how simple the process is! 

    100 Minutes 

  • DVD - Power Building Videos, Performance Carburetors, 2 Disc Set
    DVD - Power Building Videos, Performance Carburetors, 2 Disc Set
    x
                

    This Power Building Video Series DVD set covers numerous brands and types of carbs, including Holley, Edelbrock, Demon, Quick Fuel Technology and Weber (to name a few). Some of the many topics covered include choosing the right carb for your vehicle, single 4 set-ups, 6 pack set-ups, dual 4's, 2 barrels vs. 4 barrels, and much, much more.

    You'll see how each carb works, including how to modify one for the ultimate performance, and to suit your particular vehicle and driving needs. You'll see how to set, adjust & re-jet. Learn the difference between vacuum secondary's & double pumper's. You'll finally be able to put all of the old wives tales to rest! No more crappy throttle response and problems bogging off the line. You'll learn all of the secrets to selecting and tuning the right carb for your engine!

    This set also includes several pages of very useful carb data and size charts.

  • DVD - Power Building Videos, Superchargers, 2 Disc Set
    DVD - Power Building Videos, Superchargers, 2 Disc Set
    x
                

    Reading how to do things is fine, but seeing is believing. These Power Building Video Series DVDs are done by a professional engine builder who has built hundreds of engines and is considered by many to be one of the best. Video covers numerous types of blowers (both Roots type and centrifugal types), and several types of engines, with lots of great tips.

    This video set answers the following questions (and more!): What are superchargers? How do they work? Which type and size should you have for your engine? What do you need to do to an engine to be compatible with a supercharger? What kind of carburetors can you run? What about fuel injection? What kind of cam profile should you run? What do you need to do to the inside of your engine to be compatable with forced induction? 

    If you want to learn from the best, get this DVD set before you start building your supercharged engine. You'll save money knowing how to do it right the first time. 

  • DVD - Bob Harris Race Tech Workshops Stock Car Tune To Win Set
    DVD - Bob Harris Race Tech Workshops Stock Car Tune To Win Set
    x
                

    Bob Harris has more than 25 years of racing and chassis design experience and is highly sought after for chassis set-up advice. His guidance and instruction are now available for all racers in these great Race Tech DVDs packed with powerful knowledge to help you reach victory.

    Designed specifically for stock car and hobby stock classes and contains more than eight hours of seminar and hands-on footage on four DVD's.

    Topics include weekly maintenance, scaling and set-up procedures, front end alignment, bumpsteer, roll centers, ride heights, OEM four-link rear suspensions, springs, shocks and tuning at the track. It also includes a workshop manual.

  • DVD - Shaver Small Block Chevy Engines, Volume 3
    DVD - Shaver Small Block Chevy Engines, Volume 3
    x
                

    We have three Ron Shaver DVD's available to help you out.  He covers Racing Engines, Cylinders Heads & Fuel Injection.

    237TE003 - Volume #3
    Fuel Injection
    Ron Shaver continues his High Performance Technology series with Volume #3: Fuel Injection. Here he covers the basic concepts of a constant flow system, taking you through the steps to fine tune your fuel injection for different weather conditions and track types. 40 minutes. Covers SB Chevy for circle track applications only.

  • DVD - The High Performance 460 Ford
    DVD - The High Performance 460 Ford
    x
                This 7 hour long two DVD set takes you all the way from a bare block to a running 520 c.i./800hp 460 Ford engine. Big horsepower and torque.  
            
  • DVD - The Hi-Performance 454 Chevy
    DVD - The Hi-Performance 454 Chevy
    x
                This 4 hour long DVD takes you all the way from a bare block to a running 496 c.i./800+hp 454 Chevy engine. Not for the weak of heart.  
            
  • Covell Metalworking 1000-3 DVD - Working with Steel
    Covell Metalworking 1000-3 DVD - Working with Steel
    x
                This is probably the most comprehensive metalworking video to date: Ron Covell thoroughly demonstrates basic hammer and dolly techniques, and shows how to do high-level metalwork that requires no filler. In the video, he starts with a 1932 Morgan in very bad condition, and goes through every step of perfectly restoring the body. Great coverage of hole filling, patch panels, wired edge repair, rust repair, TIG welding, metal finishing, and shrinking. You’ll see how top-quality metalwork can be done with very simple tools!  

    105 Minutes 

  • Covell Metalworking 1000-15 DVD - Hammerforming
    Covell Metalworking 1000-15 DVD - Hammerforming
    x
                

    Two of the best-known names in metalshaping have teamed up to teach you the in's and out's of the hammerforming process. Hammerforms are very easy to make, and they enable you to create parts that have the look and accuracy of die-stamped parts. They allow even beginning metalworkers to produce parts they can be proud of. Ten different hammerforming operations are demonstrated, from a simple tank top to a beautiful rolled edge detail on a complicated pontoon fender for a Bugatti. The two Ron's bring over 70 years of combined experience to the viewers, and you'll see how their different styles of working with metal compliment each other. This video has striking close-up shots that bring you close to the action, and clear descriptions of all aspects of the hammerforming process. 

    76 Minutes 

  • COMP Cams 190DVD - The Proper Procedure To Install & Degree A Camshaft
    COMP Cams 190DVD - The Proper Procedure To Install & Degree A Camshaft
    x
                This video takes you through the various stages of camshaft installation and the degreeing process, completely explaining each step. Whether you’re a first time builder or a professional, you’ll refer back to this video over and over.
            
  • DVD - Bob Harris Race Tech Workshops Race To Win Set
    DVD - Bob Harris Race Tech Workshops Race To Win Set
    x
                

    Bob Harris has more than 25 years of racing and chassis design experience and is highly sought after for chassis set-up advice. His guidance and instruction are now available for all racers in these great Race Tech DVDs packed with powerful knowledge to help you reach victory.

    Features eight hours of winning information on four DVD's. Filmed live at a Harris workshop, it covers topics like front suspension, camber and caster, bumpsteer, two- and four-link rear suspensions, panhard bars, torque links, springs, shocks, tire management and basic chassis set-up.

    The package includes a workshop manual that makes it easy to take notes and keep information handy in the shop or at the track.

  • DVD - High Performance 351 Engine
    DVD - High Performance 351 Engine
    x
                This 5-1/2 hour long two DVD set takes you all the way from a bare block to a running 410 c.i./700hp 351W Ford engine. Invaulable tips, tricks and tech. Windows format.  
            
  • DVD - Power Building Videos, Rotating Assemblies, 2 Disc Set
    DVD - Power Building Videos, Rotating Assemblies, 2 Disc Set
    x
                

    This Power Building Video Series DVD set shows how to choose the right parts for your engine before it gets built. You’ll be taken through many types of cranks, rods, pistons, rings, bearings, harmonic balancers, flywheels, balancing, and everything else you can imagine that involves the internal rotating assembly.

    Building an engine is one thing, knowing which internal components to use for a given application, and why you would choose those particular parts is another, and that’s just what you’ll learn.

    This DVD set answers the following questions (and more!): Should you run a cast, forged or billet crank? What are the differences and how can you tell? Which alloy is the best? Should you increase the stroke or decrease the stroke? Which rods should you go with? I-beam, H-beam, steel or aluminum? What length should you use? What about rod angles and piston side loading? Which pistons should you use? Cast, hypereutectic or forged? Domed, dished or flat tops? Floating or pressed pins? Will you need oil rail supports? Which bearings should you use? Will they hold-up to heavy loads? Do you need cast, moly, plasma moly or gapless rings? What is balancing all about? What’s the difference between internal and external balancing? What does “balanced and blueprinted” mean? Should you use an aluminum or steel flywheel? 

  • Covell Metalworking 1000-19 DVD - English Wheel Techniques
    Covell Metalworking 1000-19 DVD - English Wheel Techniques
    x
                

    Ron Covell brings his signature easy-to-follow style to using the English wheel, a machine notoriously difficult for beginners to 'figure out'. Starting with the machine's history and a clear explanation of the principles that enable the machine to move metal, Ron shows the basic 'tracking' patterns that are used to shape panels of various sizes and configurations.

    In addition to the common techniques of wheeling, Ron also shows some lesser-known processes, such as using a rubber top wheel, and doing embossing with the machine. Whether you're brand-new to the English Wheel or an experienced user, you'll find valuable information in this video.

    86 Minutes