Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 15

Products

Fuel Injection

Shop Air and Fuel Delivery At Speedway Motors

Getting the right mix of fuel and oxygen into your engine can be tricky. Our award winning Techs can help set up a race-winning fuel system that makes serious power, but is reliable enough for your daily driver. From air cleaners to superchargers, Speedway Motors wants to help makes sure you never starve your engine again!

Featured Products
  • Hilborn AS10 5-1/2 Inch Injection Nozzles, Set of 8
    Hilborn AS10 5-1/2 Inch Injection Nozzles, Set of 8
    (Part #385708A512AS10)
    x
                

    These Hilborn injection nozzles are great for 305 cars. They must be used on 3 piece injections. 

    • Set of 8
    • Length - 5.50 Inches
    • Thread Pitch - 1/2"-20

     

  • King Racing Products 1995 Flush Mount Down Nozzle Filter
    King Racing Products 1995 Flush Mount Down Nozzle Filter
    (Part #9401995)
    x
                

    King Racing Products solved a problem for many drivers. Have you every had a nozzle filter break or come off due to debris. Now you dont have to worry with Kings flush nozzle filters. 

     

    • 1/8" NPT thread adapts to any nozzle filter biscuit.

     

     

     

  • Speedway Fuel Injector Pill Box
    Speedway Fuel Injector Pill Box
    (Part #91611508)
    x
                Clear injector pill box for easy selection. Holds up to 16 restrictor pills. Plastic, see-through lid for easy "dial-in". 
            
  • Kinsler Flowed Injector Pills
    Kinsler Flowed Injector Pills
    (Part #4733715)
    x
                Kinsler sizes .050-.110. Kinsler pills are offered in great variety for more precise fuel flow control in your fuel injection system.

    Pill size is listed at the end of a part number: 4733715-050 means pill size 050.

  • Kinsler Fuel Injection TP000112 Tough Pump -12 AN Inlet Fitting
    Kinsler Fuel Injection TP000112 Tough Pump -12 AN Inlet Fitting
    (Part #473112)
    x
                

    -12 AN inlet male flange flare fitting with O-ring for Kinsler Tough Pump fuel pump.

  • Aluminum Flare Union Fitting, 90 Degree, -3 AN
    Aluminum Flare Union Fitting, 90 Degree, -3 AN
    (Part #324982103)
    x
                
    Aluminum 90° angle union adapter fitting for 37° AN flares. Blue anodized finish.

    AN Thread Sizing Guide (GIF)

    Fitting Thread Application Chart (GIF)

  • Hilborn Fuel Injection PG150D/CL S0 1.7 Billet GPM Fuel Pump
    Hilborn Fuel Injection PG150D/CL S0 1.7 Billet GPM Fuel Pump
    (Part #385PG150DS0)
    x
                

    Hilborn's factory flow-tested mechanical fuel pumps can be used with gas, alcohol or nitro applications. Rotation can be easily reversed to accommodate cam drives or belt drives.

    This billet aluminum pump is almost 1-1/2 lbs. lighter than the cast aluminum model. The clamp base model offers you the convenience of a quick disconnect. This pump can be rotated for easy access to fittings. Includes "Y" fitting which converts one #8 outlet to three #6 outlets. 

    Sizes: #00, #0, #S0, #1/2

    The full range of capacity from size #00 through size #1/2 is from .67gpm to 2.22gpm. All pumps rated at 1800rpm with 50psi. 

     

  • Hilborn 327C8B Mechanical Fuel Injection, 2-7/16 Inch Base Only
    Hilborn 327C8B Mechanical Fuel Injection, 2-7/16 Inch Base Only
    (Part #385327C8B-1)
    x
                

    The Hilborn MEGA Power Injectors pick up where the Basic Injector leaves off. This injector will fit standard 23 degree heads. Utilizing a curve throat design, the MEGA Power provides minimal flow disruption, allowing outstanding port speed for maximum cylinder fill. Hilborn injectors come with numerous standard features that prove once again, you get more value from Hilborn Fuel Injection.

    This aluminum MEGA Power Fuel Injector is designed primarily for oval track and features a 3-piece construction for precision port matching of head and block combination. Unit comes with throttle return springs, breathers, lines, primary and secondary by-pass valves, linkage, 4 pills, and instructions. All units are factory flow-tested.

    Note: Does not include nozzles or stacks - they must be ordered separately.

Filter

"Air and Fuel Delivery, Fuel Injection" Page 1 of 15

Page 1 of 15

  • Lokar TCB-40TP3 Tuned-Port Billet Aluminum Bracket w/Triple Stud
    Lokar TCB-40TP3 Tuned-Port Billet Aluminum Bracket w/Triple Stud
    (Part #491TCB40TP3)
    x
                

    The billet aluminum bracket mounts to the side of the Tuned-Port plenum. The billet aluminum bracket is available with:

    • a single stud for throttle only
    • double stud for throttle and kickdown
    • triple stud for a throttle, kickdown and cruise control cable.
  • M&W BC-1B Aluminum Sprint Car Bell Crank, Black
    M&W BC-1B Aluminum Sprint Car Bell Crank, Black
    (Part #910553001)
    x
                These Sprint racing bell cranks come complete with a sealed bearing for  smooth action.  Multiple adjustment holes give you the ability to make it the part that works.  Anodized 6061 T6 Aluminum.
    • CNC-machined
    • Anodized black aluminum
    • Measures 2-7/16" and 3-9/16" from the center of the bearing to the end of the arms
    • Has .246" I.D. bearing
    • Bearing O.D. is .630"
    • Overall Length: 4.37"
    • Overall Thickness: .17"
    • Hole Diameter: .19"
  • Kinsler Fuel Injection 3904 High Speed Diaphragm Bypass
    Kinsler Fuel Injection 3904 High Speed Diaphragm Bypass
    (Part #4733114)
    x
                

    This Kinser diaphragm bypass is used for secondary or high speed bypass on long tracks. Has a restrictor jet provision, neoprene diaphragm for gasoline or methanol, and a hard-anodized aluminum housing. Simple adjustable pop-off pressure using a balde screwdriver and 7/16" wrench.

    Includes -6 AN male flare fittings.

  • Kinsler Flowed Injector Pills
    Kinsler Flowed Injector Pills
    (Part #4733715)
    x
                Kinsler sizes .050-.110. Kinsler pills are offered in great variety for more precise fuel flow control in your fuel injection system.

    Pill size is listed at the end of a part number: 4733715-050 means pill size 050.

  • Russell Performance 641605 LS/Hemi EFI Fuel System Retrofit Kit
    Russell Performance 641605 LS/Hemi EFI Fuel System Retrofit Kit
    (Part #325641605)
    x
                

    This fuel pump kit provides a complete electronic fuel system for GM LS-series and Chrysler 5.7 Hemi engine swaps in muscle cars, street rods and off-road vehicles. Kit features an Edelbrock EFI fuel pump, regulator/filter, relay, Russell Pro Flex hose, an assortment of silver and black AN hose end fittings, and all mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.

    • For GM/Chevy LS and Chrysler 5.7 Hemi engine swaps into older non-EFI vehicles
    • Includes Edelbrock Electric Fuel Pump # 3594
    • Includes Edelbrock Fuel Pressure Regulator
    • Returnless Fuel System
    • Supports up to 450 HP
  • Lokar XTCB-40RJ1 Midnight Series 502 Ram Jet Throttle Cable Bracket
    Lokar XTCB-40RJ1 Midnight Series 502 Ram Jet Throttle Cable Bracket
    (Part #491XTCB40RJ1)
    x
                
    • Brackets fit the GM ramjet engine.
    • These brackets along with Lokar Throttle Cables will allow the ramjet to work properly in any vehicle.
    • When used with an automatic transmission, be sure to use the transmission specific Lokar Kickdown Cable.
    • Uses TC-1000RJ throttle cable.
  • LRB Three AN6 Port Fuel Manifold
    LRB Three AN6 Port Fuel Manifold
    (Part #94011595)
    x
                This fuel manifold can be clamped to a 1 3/8'' frame rail or upright. This allows easy plumbing of high-speeds and returns. Has either three or four AN 6 ports and one AN 8.
            
  • Hilborn 710A312ASZ #16 Injector Nozzles, #16 Up, 3-1/2 Inch Tip, Set/8
    Hilborn 710A312ASZ #16 Injector Nozzles, #16 Up, 3-1/2 Inch Tip, Set/8
    (Part #385710A312ASZ)
    x
                

    Each Hilborn nozzle has 1/2"-20 straight threads. Sold in sets of eight.

  • Edelbrock 12801 Polished 2-Carb Fuel Block
    Edelbrock 12801 Polished 2-Carb Fuel Block
    (Part #32512801)
    x
                

    Edelbrock has reintroduced the vintage cast aluminum fuel blocks for dual, triple and quad carb applications for your hot rod or custom. This fuel log features a single 3/8" NPT inlet and two 1/4" NPT outlets. Each fuel distribution block has four holes for mounting to a firewall.

    Polished finish.

  • Hex Polished Aluminum Fuel Block, 4-Hole
    Hex Polished Aluminum Fuel Block, 4-Hole
    (Part #91611034)
    x
                

    Speedway fuel blocks provide even fuel distribution for proper fuel flow to multi-carb set-ups. This 1950's style six-sided polished aluminum fuel distribution block is designed for four-carb applications. Fuel log is 5" long and has a single 1/4" NPT pipe inlet fittng. Outlets for carburetor fittings are 1/8" NPT threaded ports.

    Don't forget to order the suggested hose barb fittings to complete your set-up!

  • Injector Stack Wash Plugs, 2.555 - 2.690 Inch, Set/10
    Injector Stack Wash Plugs, 2.555 - 2.690 Inch, Set/10
    (Part #9402744)
    x
                
    • Tapered plugs for fuel injector stacks
    • Made from high impact plastic
    • Set of 10
  • -6 AN Carb and Fuel Pump Fitting, 5/8 Inch-18 Inverted Flare Thread
    -6 AN Carb and Fuel Pump Fitting, 5/8 Inch-18 Inverted Flare Thread
    (Part #6174038)
    x
                

    Fits the Rochester 2GC Carburetor Part Number 455-37001.

    Fitting Thread Application Chart (GIF)

  • Fuel Injection Wash Plugs, 2-3/16 Inch, Set/8
    Fuel Injection Wash Plugs, 2-3/16 Inch, Set/8
    (Part #9402714)
    x
                Has an O-ring for a tight seal against dirt and water. Each plug is designed to hold a spark plug and an injection nozzle. Comes in a set of eight.
            
  • Trans-Dapt 2566 Torque Curve MPFI Spacer - GM
    Trans-Dapt 2566 Torque Curve MPFI Spacer - GM
    (Part #7202566)
    x
                

    This spacer was designed to give you an increase in fuel mileage, torque and throttle response but with ease of installation and a great price. Most others cause unwanted turbulence and create an annoying whistle. Includes hardware and gaskets.

    1999-2006 Chevy/GMC 1500, 2500, 3500 trucks, SUVs, Tahoe, Suburban, Yukon, Escalade, Hummer H2 and Motorhomes with 4.8,5.3, 6.0 and 8.1 engines with multi-port fuel injection.

    720-2566 Instructions (PDF) 

  • King Racing Products 1995 Flush Mount Down Nozzle Filter
    King Racing Products 1995 Flush Mount Down Nozzle Filter
    (Part #9401995)
    x
                

    King Racing Products solved a problem for many drivers. Have you every had a nozzle filter break or come off due to debris. Now you dont have to worry with Kings flush nozzle filters. 

     

    • 1/8" NPT thread adapts to any nozzle filter biscuit.

     

     

     

  • Lokar XTCB-40EFI Midnight Series Ford EFI Throttle Bracket 86-93, EGR
    Lokar XTCB-40EFI Midnight Series Ford EFI Throttle Bracket 86-93, EGR
    (Part #491XTCB40EFI)
    x
                
    • Ford EFI Bracket fits 1986 to 1993, Ford 302, and 351 electronic fuel injection systems that have installed the Mustang EGR spacer.
    • This Stainless Bracket mounts in stock location for easy installation of our Kickdown Cables and Throttle Cables.
    • (1986 to 1993 uses TC-1000HT)
    • The EFI Bracket does not fit B.A.P. throttle bodies.
Goto Previous PagePrevious Page
1 2 3 4 5 ... 15