Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Eatons Aeroquip name represents quality and innovation in the hydraulics industry. Eaton offers Aeroquip hose, fittings, adapters, couplings and fluid connectors for all pressures in industrial, aerospace and automotive applications. Aeroquip continues to strive in building the best hoses out there, the Aeroquip starlite hose continues to set the standards in the hose industry.

Featured Products
Aeroquip FBM1122 90 Degree High Pressure -6 AN TFE Hose End
Aeroquip FBM1122 90 Degree High Pressure -6 AN TFE Hose End
x
            High alloy steel for high pressure brake and power steering systems. When assembled, you have a quality hose assembly that can handle up to 3000 psi. 

Works only with TFE Stainless Braided
High Pressure Hose.

Hose End Application Chart (GIF)

Aeroquip FBG0600 FC300 High Pressure Hose, -6 AN, Per Ft.
Aeroquip FBG0600 FC300 High Pressure Hose, -6 AN, Per Ft.
x
            

Aeroquip FC 300 hose is designed for high pressure fluid applications such as power steering line. The FC300 hose features a blue, abrasion-resistant fabric cover over a synthetic rubber inner tube for longer life. This high pressure hose is ideal for power steering, hydraulics, air, fuel and lubricating oil applications.

  • Max operating pressure is 2250 psi
  • Minimum bend radius is 4"
  • Temperature range of -55°F to +300°F
  • Hose is sold by the foot

Note: The FC300 Hose only works with FC300 steel fittings (not included). Easily assembles with a bench vise and/or wrenches. Ends are reusable.

AN Thread Sizing Guide (GIF)

AN 6 Hose Application Chart (GIF)

Aeroquip Stainless Steel Braided Low Pressure Hose, 11/32 Inch ID, -6 AN
Aeroquip Stainless Steel Braided Low Pressure Hose, 11/32 Inch ID, -6 AN
x
            

Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race fuel line applications.

  • Applications include fuel, lube, coolant, air
  • 750 PSI operating pressure
  • -45° to +300° F temperature rating
  • Made in the U.S.A.
  • Use with Aeroquip full flow hose ends

Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

Fitting Thread Application Chart (GIF)

Aeroquip Special Application Socketless AN Hose, Black
Aeroquip Special Application Socketless AN Hose, Black
x
            
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!
  • Construction: AQP elastomer tube, textile braid reinforcement, black AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

    Hose Fitting Sizing Chart (GIF)

    "Aeroquip" Page 1 of 7

    • Teflon Hose Tool
      $39.99
      Product Rating: 5.00 Stars
      Teflon Hose Tool
      x
                  This hand-held tool is designed to seat Teflon tube against a sleeve. Use with smooth-bore Teflon hose in sizes AN3, AN4, AN5, AN6, AN8, AN10 and AN12. 
              
    • Aeroquip Special Application Socketless AN Hose, Black
      Aeroquip Special Application Socketless AN Hose, Black
      x
                  
    • Textile braid reinforcement
    • Low pressure design for use with socketless reuseable fittings only
    • No hose clamp necessary
    • Ideal hose for fuel line applications
    • 50,000 ft of hose in stock!
    • Construction: AQP elastomer tube, textile braid reinforcement, black AQP elastomer cover.

      Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

      Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

      Aeroquip Hose Sizing Guide (GIF)

      Hose Fitting Sizing Chart (GIF)

    • 90 Degree Nickel Plated AC Fitting, -6 AN
      90 Degree Nickel Plated AC Fitting, -6 AN
      x
                  These handsome nickle plated steel fittings are reuseable.
              
    • Aeroquip FCF0603 Stainless Steel Braided AC Hose, -6 AN, 3 Ft. Length
      Aeroquip FCF0603 Stainless Steel Braided AC Hose, -6 AN, 3 Ft. Length
      x
                  

      This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.

      .33" I.D. - 3 Ft. length

    • Aeroquip FBM3632 Push On Fitting Tool for AN4, AN6, AN8
      Aeroquip FBM3632 Push On Fitting Tool for AN4, AN6, AN8
      x
                  

      It's a pain to push that blue hose onto a fitting! With this tool you don't need a vise or any other tools. Simply lube the inside of the hose, clamp the hose and give the lever a pull!

      For AN 4, 6, 8 straight push-on fittings only.

    • Aeroquip FBM3553 Push-On Hose Fitting Lube
      Aeroquip FBM3553 Push-On Hose Fitting Lube
      x
                  

      Aeroquip Hose Assembly Lube is a specially formulated lubricant for use in hose assembly work. Makes hose assembly a snap.

      Available in pint containers. Use for either hand or machine assembly.

      Learn why using assembly lube is so important in our tech article, Installing New Hardware.

    • Straight Nickel Plated AC Fitting, O-Ring Pilot, -10 AN
      Straight Nickel Plated AC Fitting, O-Ring Pilot, -10 AN
      x
                  These handsome nickle plated steel fittings are reuseable.
              
    • Aeroquip FBM4035 Hose End Coupler Fitting, 90 Degree, Blue/Red, -12 AN
      Aeroquip FBM4035 Hose End Coupler Fitting, 90 Degree, Blue/Red, -12 AN
      x
                  

      This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a blue/red anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617312).

      • -12 AN 
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • Unique taper design ensures easy assembly
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Accepts a variety of lightweight aluminum AN style adapters & fittings
      • Available in Blue/Red corrosion resistant finish

      90° Full Flow Ends come in sizes of AN4, AN6, AN8, AN10, AN12 and AN16.

      Fitting Thread Application Chart (GIF)

    • Aeroquip FBU0600 Starlite Hose, -6 AN
      Aeroquip FBU0600 Starlite Hose, -6 AN
      x
                  

      Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Starlite hose can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. Works great as a fuel line of gasoline and alcohol fuels.

      NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

      Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

      There are only two ways to order these fittings and hose:

      1. Bring or send us your old hose to match.
      2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    • Aeroquip Special Application Socketless AN Hose, Blue
      Aeroquip Special Application Socketless AN Hose, Blue
      x
                  
    • Textile braid reinforcement
    • Low pressure design for use with socketless reuseable fittings only
    • No hose clamp necessary
    • Ideal hose for fuel line applications
    • 50,000 ft of hose in stock!

      Construction: AQP elastomer tube, textile braid reinforcement, blue AQP elastomer cover.

      Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

      Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

      Aeroquip Hose Sizing Guide (GIF)

    • Hose Fitting Sizing Chart (GIF)

    • Aeroquip FBM4414 Black Straight Swivel Hose End Coupler Fitting -10 AN
      Aeroquip FBM4414 Black Straight Swivel Hose End Coupler Fitting -10 AN
      x
                  

      This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617310).

      • -10 AN
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • Unique taper design ensures easy assembly
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Accepts a variety of lightweight aluminum AN style adapters & fittings
      • Available in Black corrosion resistant finish

      Straight full flow ends come in sizes of AN6, AN8, AN10, AN12, and AN16.

      Full Swivel Application Chart (GIF)

    • Aluminum Male AN10 O-Ring to AN10 Adaptor
      Aluminum Male AN10 O-Ring to AN10 Adaptor
      x
                  

      Male O-ring to AN. Steel or aluminum.

      AN Thread Size Guide (GIF)

      Fitting Thread Application Chart (GIF)

    • Aeroquip FCF0803 Stainless Steel Braided AC Hose, -8 AN, 3 Ft. Length
      Aeroquip FCF0803 Stainless Steel Braided AC Hose, -8 AN, 3 Ft. Length
      x
                  This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.
              
    • AC O-Rings - Replacement AN6 AC O-Rings - Set of 6
      AC O-Rings - Replacement AN6 AC O-Rings - Set of 6
      x
                  Replacement o-rings in an assortment of AN sizes for your air conditioning system.   
              
    • Hot Head Aluminum Male Quick Release
      Hot Head Aluminum Male Quick Release
      x
                  1/2" NPT fitting. Male end of the quick release. Prevents fluid loss. 250 PSI working pressure. -15 to +300 degrees F working temperature. Allows for quick disconnect from coolant lines.
              
    • Aeroquip FBG0600 FC300 High Pressure Hose, -6 AN, Per Ft.
      Aeroquip FBG0600 FC300 High Pressure Hose, -6 AN, Per Ft.
      x
                  

      Aeroquip FC 300 hose is designed for high pressure fluid applications such as power steering line. The FC300 hose features a blue, abrasion-resistant fabric cover over a synthetic rubber inner tube for longer life. This high pressure hose is ideal for power steering, hydraulics, air, fuel and lubricating oil applications.

      • Max operating pressure is 2250 psi
      • Minimum bend radius is 4"
      • Temperature range of -55°F to +300°F
      • Hose is sold by the foot

      Note: The FC300 Hose only works with FC300 steel fittings (not included). Easily assembles with a bench vise and/or wrenches. Ends are reusable.

      AN Thread Sizing Guide (GIF)

      AN 6 Hose Application Chart (GIF)

    • Aeroquip FBU1600 Starlite Hose, -16 AN
      Aeroquip FBU1600 Starlite Hose, -16 AN
      x
                  

      Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

      NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

      Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

      There are only two ways to order these fittings and hose:

      1. Bring or send us your old hose to match.
      2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    • Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -6 AN
      Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -6 AN
      x
                  

      This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and blue anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

      • -6 AN female to push-on style adapter
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • Unique taper design ensures easy assembly
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Accepts a variety of lightweight aluminum AN style adapters & fittings
      • Works great with custom fuel lines
      • Available in Red/Blue corrosion resistant finish

      Straight full flow ends come in sizes of AN4, AN6, AN8, AN10, AN12, and AN16.

      Fitting Thread Application Chart (GIF)

    • 90 Degree Nickel Plated AC Fitting, O-Ring Pilot, -10 AN
      90 Degree Nickel Plated AC Fitting, O-Ring Pilot, -10 AN
      x
                  These handsome nickle plated steel fittings are reuseable.
              
    • Aeroquip FCE1012 Nickel Plated Straight -6 AN Hose End Coupler Fitting
      Aeroquip FCE1012 Nickel Plated Straight -6 AN Hose End Coupler Fitting
      x
                  

      Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

      Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

      These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

      • -6 AN Aluminum
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Available in a Nickel corrosion resistant finish

      Fitting Thread Application Chart (GIF)

    • Aeroquip Stainless Steel Braided Low Pressure Hose, 9/16 Inch ID, -10 AN
      Aeroquip Stainless Steel Braided Low Pressure Hose, 9/16 Inch ID, -10 AN
      x
                  

      Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race fuel line applications.

      • Applications include fuel, lube, coolant, air
      • 750 PSI operating pressure
      • -45° to +300° F temperature rating
      • Made in the U.S.A.
      • Use with Aeroquip full flow hose ends

      Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

      Fitting Thread Application Chart (GIF)

    • Aluminum Flare Union Fitting, 90 Degree, -6 AN
      Aluminum Flare Union Fitting, 90 Degree, -6 AN
      x
                  

      Aluminum 90° angle union adapter fitting for 37° AN flares. Blue anodized finish.

      AN Thread Sizing Guide (GIF)

      Fitting Thread Application Chart (GIF)

    • Aeroquip FBM1100 Straight High Pressure -3 AN TFE Hose End
      Aeroquip FBM1100 Straight High Pressure -3 AN TFE Hose End
      x
                  Designed for high pressure brake and power steering systems. When assembled, you have a quality hose assembly that can handle up to 3000 psi. 

      Works only with TFE stainless braided high pressure hose.

      Hose End Application Chart (GIF)

    • Aeroquip FBC0300 -3 AN TFE Braided High Pressure Hose, 1/8 Inch ID
      Aeroquip FBC0300 -3 AN TFE Braided High Pressure Hose, 1/8 Inch ID
      x
                  

      Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

      The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

      Sold by the foot and use with either crimp or reusable fittings to make your own custom power steering line.

      Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

      See part # 6172013 for correct fittings to use with this hose.

      Braided High Pressure Hose Chart Application (GIF)

      Fitting Thread Application Chart (GIF)

    • Straight Nickel Plated AC Fitting, O-Ring Pilot, -6 AN
      Straight Nickel Plated AC Fitting, O-Ring Pilot, -6 AN
      x
                  These handsome nickle plated steel fittings are reuseable.
              
    • Tight Fit 90 Degree Socketless Reusable Fittings
      Tight Fit 90 Degree Socketless Reusable Fittings
      x
                  

      These tight fit 90° steel fittings work great for a variety of different applications.  They feature your choice of -4, -6, or -8 AN male/female ends with a corrosion resistant finish.

      • Working pressure of 5500 psi 
      • 90° steel fuel line hose connector
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Choose from -4 AN, -6 AN, or -8 AN sizes

      Socketless Fitting Application Chart (GIF)

      AN Thread Size Guide (GIF)

      Fitting Thread Size Guide (GIF)

    • Aeroquip FBU1200 Starlite Hose, -12 AN
      Aeroquip FBU1200 Starlite Hose, -12 AN
      x
                  

      Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

      NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

      Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

      There are only two ways to order these fittings and hose:

      1. Bring or send us your old hose to match.
      2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    • Aeroquip FCE4032 Nickel 90 Degree Hose End Coupler Fitting, -6 AN
      Aeroquip FCE4032 Nickel 90 Degree Hose End Coupler Fitting, -6 AN
      x
                  

      Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

      Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

      These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

      • -6 AN Aluminum
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Available in a Nickel corrosion resistant finish

      Fitting Thread Application Chart (GIF)

    • Aeroquip FBU0400 Starlite Hose, -4 AN
      Aeroquip FBU0400 Starlite Hose, -4 AN
      x
                  

      Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

      NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

      Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

      There are only two ways to order these fittings and hose:

      1. Bring or send us your old hose to match.
      2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    • Aeroquip Stainless Steel Braided Low Pressure Hose, 11/16 Inch ID, -12 AN
      Aeroquip Stainless Steel Braided Low Pressure Hose, 11/16 Inch ID, -12 AN
      x
                  

      Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race applications.

      • Applications include fuel, lube, coolant, air
      • 750 PSI operating pressure
      • -45° to +300° F temperature rating
      • Made in the U.S.A.
      • Use with Aeroquip full flow hose ends

      Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

      Fitting Thread Application Chart (GIF)

    • 90 Degree Nickel Plated AC Fitting, O-Ring Pilot, -8 AN
      90 Degree Nickel Plated AC Fitting, O-Ring Pilot, -8 AN
      x
                  These handsome nickle plated steel fittings are reuseable.
              
    • Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -4 AN
      Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -4 AN
      x
                  

      This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and blue anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617304).

      • -4 AN female to push-on adapter
      • Straight style fuel line hose connector/coupler
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • Unique taper design ensures easy assembly
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Accepts a variety of lightweight aluminum AN style adapters & fittings
      • Available in Red/Blue corrosion resistant finish

      Straight full flow ends come in sizes of AN4, AN6, AN8, AN10, AN12, and AN16.

      Fitting Thread Application Chart (GIF)

    • Aeroquip FBM4212 Starlite Crimp Fitting, Straight, -6 AN
      Aeroquip FBM4212 Starlite Crimp Fitting, Straight, -6 AN
      x
                  

      Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

      Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

      There are only two ways to order these fittings and hose:

      1. Bring or mail us your old hose to match.
      2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

      Fitting Thread Application Chart (GIF)

    • Aeroquip FBC0600 -6 AN TFE Braided High Pressure Hose, 11/32 Inch ID
      Aeroquip FBC0600 -6 AN TFE Braided High Pressure Hose, 11/32 Inch ID
      x
                  

       Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

      The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

      Sold by the foot and use with either crimp or reusable fittings to make your own custom power steering line.

      Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

      See part # 6172013 for correct fittings to use with this hose.

      Braided High Pressure Hose Chart Application (GIF)

      Fitting Thread Application Chart (GIF)

    • Aeroquip Straight Full Flow Swivel Hose End Fitting, Red/Blue, -8 AN
      Aeroquip Straight Full Flow Swivel Hose End Fitting, Red/Blue, -8 AN
      x
                  

      This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and blue anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617308).

      • -8 AN female to push-on adapter
      • Straight style fuel line hose connector/coupler
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • Unique taper design ensures easy assembly
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Accepts a variety of lightweight aluminum AN style adapters & fittings
      • Available in Red/Blue corrosion resistant finish

      Straight full flow ends come in sizes of AN4, AN6, AN8, AN10, AN12, and AN16.

      Fitting Thread Application Chart (GIF)

    • Socketless Reusable Push-On Hose End for -8 AN Fitting, 90 Degree
      Socketless Reusable Push-On Hose End for -8 AN Fitting, 90 Degree
      x
                  

      Push-on style with 90° steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

      Socketless Push-On Application Chart (GIF)

      Socketless Push-On Assembly (GIF)

      AN Thread Size Guide (GIF)

      Fitting Thread Size Guide (GIF)

    • Straight Socketless Reuseable Push-On Hose End for -8 AN Fitting
      Straight Socketless Reuseable Push-On Hose End for -8 AN Fitting
      x
                  

      Push-on straight brass hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

      Socketless Push-On Application Chart (GIF)

      Socketless Push-On Assembly (GIF)

      AN Thread Size Guide (GIF)

      Fitting Thread Size Guide (GIF)

    • Straight Nickel Plated AC Fitting, O-Ring Pilot, -8 AN
      Straight Nickel Plated AC Fitting, O-Ring Pilot, -8 AN
      x
                  These handsome nickle plated steel fittings are reuseable.
              
    • Aeroquip FBU1000 Starlite Hose, -10 AN, 9/16 Inch
      Aeroquip FBU1000 Starlite Hose, -10 AN, 9/16 Inch
      x
                  

      Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

      • -10 AN - 9/16"
      • Up to 45% lighter than stainless steel braided hose
      • Working temperature is -45 Degree F to +300 Degree F
      • Can be used with either crimp style or reusable hose fittings

      NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

      Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

      There are only two ways to order these fittings and hose:

      1. Bring or send us your old hose to match.
      2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    • Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
      Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
      x
                  

      Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

      Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

      There are only two ways to order these fittings and hose:

      1. Bring or mail us your old hose to match.
      2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

      Fitting Thread Application Chart (GIF)

    Goto Previous PagePrevious Page
    1 2 3 4 5 6 7