Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Aeroquip Products At Speedway Motors

Eatons Aeroquip name represents quality and innovation in the hydraulics industry. Eaton offers Aeroquip hose, fittings, adapters, couplings and fluid connectors for all pressures in industrial, aerospace and automotive applications. Aeroquip continues to strive in building the best hoses out there, the Aeroquip starlite hose continues to set the standards in the hose industry.

Featured Products
Aeroquip Special Application Socketless AN Hose, Blue
Aeroquip Special Application Socketless AN Hose, Blue
SKU-106332
x
            
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!

    Construction: AQP elastomer tube, textile braid reinforcement, blue AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

  • Hose Fitting Sizing Chart (GIF)

    Aeroquip FBG0600 FC300 High Pressure Hose, -6 AN, Per Ft.
    Aeroquip FBG0600 FC300 High Pressure Hose, -6 AN, Per Ft.
    SKU-106FC300
    x
                

    Aeroquip FC 300 hose is designed for high pressure fluid applications such as power steering line. The FC300 hose features a blue, abrasion-resistant fabric cover over a synthetic rubber inner tube for longer life. This high pressure hose is ideal for power steering, hydraulics, air, fuel and lubricating oil applications.

    • Max operating pressure is 2250 psi
    • Minimum bend radius is 4"
    • Temperature range of -55°F to +300°F
    • Hose is sold by the foot

    Note: The FC300 Hose only works with FC300 steel fittings (not included). Easily assembles with a bench vise and/or wrenches. Ends are reusable.

    AN Thread Sizing Guide (GIF)

    AN 6 Hose Application Chart (GIF)

    Aeroquip Stainless Steel Braided Low Pressure Hose, 11/32 Inch ID, -6 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 11/32 Inch ID, -6 AN
    SKU-617306
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race fuel line applications.

    • Applications include fuel, lube, coolant, air
    • 750 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

    Aeroquip Special Application Socketless AN Hose, Black
    Aeroquip Special Application Socketless AN Hose, Black
    SKU-106333
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!
  • Construction: AQP elastomer tube, textile braid reinforcement, black AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

    Hose Fitting Sizing Chart (GIF)

    "Aeroquip" Page 1 of 7

    • Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
      Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
      SKU-6174255
      x
                  

      Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

      Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

      There are only two ways to order these fittings and hose:

      1. Bring or mail us your old hose to match.
      2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

      Fitting Thread Application Chart (GIF)

    • Aeroquip FCF0809 Stainless Steel Braided AC Hose, -8 AN, 9 Ft. Length
      Aeroquip FCF0809 Stainless Steel Braided AC Hose, -8 AN, 9 Ft. Length
      SKU-617809
      x
                  This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.
              
    • Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree
      Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree
      SKU-1061440
      x
                  

      45° push-on style steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils. 

      Socketless Push-On Application Chart (GIF)

      Socketless Push-On Assembly (GIF)

    • Aeroquip FCE1524 Nickel 45 Deg Push-On Hose Socketless Fitting, -10 AN
      Aeroquip FCE1524 Nickel 45 Deg Push-On Hose Socketless Fitting, -10 AN
      SKU-6171524
      x
                  

      Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

      Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

      Socketless Fitting Application Chart (GIF)

    • Aeroquip FBM4043 Hose End Coupler Fitting, 120 Degree, Blue/Red, -8 AN
      Aeroquip FBM4043 Hose End Coupler Fitting, 120 Degree, Blue/Red, -8 AN
      SKU-6171023
      x
                  

      Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in red/blue anodized finishes.

      • 120 Degree 
      • Aluminum
      • Hose End Size: -8 AN
      • Fitting Style: Reusable non-swivel
      • Adapter Size: -8 AN
      • Adapter Attachment: Female threads
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • Unique taper design ensures easy assembly
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Accepts a variety of lightweight aluminum AN style adapters & fittings
      • Available in Blue/Red corrosion resistant finish

      Fitting Thread Application Chart (GIF)

    • Brake Line Quick Disconnects Steel-Female Half
      Brake Line Quick Disconnects Steel-Female Half
      SKU-9401117
      x
                  

      These quick disconnects were designed to be used with brake fluid; most others will leak after use. Choose aluminum or steel. 

      AN 3 ends.  

    • Aeroquip FCE1513 Nickel Straight Push-On Hose Socketless Fitting -8 AN
      Aeroquip FCE1513 Nickel Straight Push-On Hose Socketless Fitting -8 AN
      SKU-6171513
      x
                  

      Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

      Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

      Socketless Fitting Application Chart (GIF)

    • Aeroquip FCE4023 Nickel 45 Degree Hose End Coupler Fitting, -8 AN
      Aeroquip FCE4023 Nickel 45 Degree Hose End Coupler Fitting, -8 AN
      SKU-61710100
      x
                  

      Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

      Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

      These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617308).

      • -8 AN Aluminum
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Available in a Nickel corrosion resistant finish

      Fitting Thread Application Chart (GIF)

    • Aeroquip FBM1110 45 Degree High Pressure -3 AN TFE Hose End
      Aeroquip FBM1110 45 Degree High Pressure -3 AN TFE Hose End
      SKU-6172015
      x
                  High alloy steel for high pressure brake and power steering systems. When assembled, you have a quality hose assembly that can handle up to 3000 psi. 

      Works only with TFE Stainless Braided
      High Pressure Hose.

      Hose End Application Chart (GIF)

    • Aeroquip FBM4062 Hose End Coupler Fitting, 180 Degree, Blue/Red, -6 AN
      Aeroquip FBM4062 Hose End Coupler Fitting, 180 Degree, Blue/Red, -6 AN
      SKU-6171026
      x
                  

      Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in red/blue anodized finishes.

      • 180 Degree 
      • Aluminum
      • Hose End Size: -6 AN
      • Fitting Style: Reusable non-swivel
      • Adapter Size: -6 AN
      • Adapter Attachment: Female threads
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • Unique taper design ensures easy assembly
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Accepts a variety of lightweight aluminum AN style adapters & fittings
      • Available in a Red/Blue corrosion resistant finish

      Fitting Thread Application Chart (GIF)

    • Aeroquip FBM4216 Starlite Crimp Fitting, Straight, -16 AN
      Aeroquip FBM4216 Starlite Crimp Fitting, Straight, -16 AN
      SKU-6174216
      x
                  

      Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

      Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

      There are only two ways to order these fittings and hose:

      1. Bring or mail us your old hose to match.
      2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

      Fitting Thread Application Chart (GIF)

    • Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -4 AN
      Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -4 AN
      SKU-6171001
      x
                  

      This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and silver anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617304).

      • -4 AN female to push-on adapter
      • Straight style fuel line hose connector/coupler
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • Unique taper design ensures easy assembly
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Accepts a variety of lightweight aluminum AN style adapters & fittings
      • Available in Red/Silver corrosion resistant finish

      Straight full flow ends come in sizes of AN4, AN6, AN8, AN10, AN12, and AN16.

      Fitting Thread Application Chart (GIF)

    • Aeroquip FCE4035 Nickel Plated -12 AN Hose End Fitting, 90 Degree
      Aeroquip FCE4035 Nickel Plated -12 AN Hose End Fitting, 90 Degree
      SKU-61710190
      x
                  

      Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

      Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

      These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617312).

      • -12 AN Aluminum
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Available in a Nickel corrosion resistant finish

      Fitting Thread Application Chart (GIF)

    • Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
      Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
      SKU-6174242
      x
                  

      Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

      Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

      There are only two ways to order these fittings and hose:

      1. Bring or mail us your old hose to match.
      2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

      Fitting Thread Application Chart (GIF)

    • Tube Seal End, Red Anodized, -24 AN, 1-7/8 Inch I/D
      Tube Seal End, Red Anodized, -24 AN, 1-7/8 Inch I/D
      SKU-6172023
      x
                  Tube seal ends are designed for street applications. Connect stainless  hose to outlet with low pressure indicator (not exceeding 50 psi when  using AN hose size 4-12 and under 25 psi with sizes 16-32).
              
    • Socketless Reusable Push-On Hose End for -6 AN Fitting, 90 Degree
      Socketless Reusable Push-On Hose End for -6 AN Fitting, 90 Degree
      SKU-1061242
      x
                  

      Push-on style with 90° steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

      Socketless Push-On Application Chart (GIF)

      Socketless Push-On Assembly (GIF)

    • Aeroquip FBM4463 Black Hose End Coupler Fitting 180 Degree Angle -8 AN
      Aeroquip FBM4463 Black Hose End Coupler Fitting 180 Degree Angle -8 AN
      SKU-61710271
      x
                  

      Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in black anodized finish.

      • 180 Degree 
      • Aluminum
      • Hose End Size: -8 AN
      • Fitting Style: Reusable non-swivel
      • Adapter Size: -8 AN
      • Adapter Attachment: Female threads
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • Unique taper design ensures easy assembly
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Accepts a variety of lightweight aluminum AN style adapters & fittings
      • Available in a Black corrosion resistant finish

      Fitting Thread Application Chart (GIF)

    • Aeroquip FBM4045 120   Hose End Coupler Fitting, Blue/Red, -12 AN
      Aeroquip FBM4045 120 Hose End Coupler Fitting, Blue/Red, -12 AN
      SKU-6171025
      x
                  

      Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in red/blue anodized finishes.

      • 120 Degree 
      • Aluminum
      • Hose End Size: -12 AN
      • Fitting Style: Reusable non-swivel
      • Adapter Size: -12 AN
      • Adapter Attachment: Female threads
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • Unique taper design ensures easy assembly
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Accepts a variety of lightweight aluminum AN style adapters & fittings
      • Available in Blue/Red corrosion resistant finish

      Fitting Thread Application Chart (GIF)

    • Aeroquip FCE1533 Nickel 90 Degree Push-On Socketless Fitting, -8 AN
      Aeroquip FCE1533 Nickel 90 Degree Push-On Socketless Fitting, -8 AN
      SKU-6171533
      x
                  

      Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

      Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

      Socketless Fitting Application Chart (GIF)

    • Aeroquip FBM1121 90 Degree High Pressure -4 AN TFE Hose End
      Aeroquip FBM1121 90 Degree High Pressure -4 AN TFE Hose End
      SKU-6172018
      x
                  High alloy steel for high pressure brake and power steering systems. When assembled, you have a quality hose assembly that can handle up to 3000 psi. 

      Works only with TFE Stainless Braided
      High Pressure Hose.

      Hose End Application Chart (GIF)

    • Aeroquip FBM4234 Starlite Crimp Fitting, 90 Degree, -10 AN
      Aeroquip FBM4234 Starlite Crimp Fitting, 90 Degree, -10 AN
      SKU-6174234
      x
                  

      Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

      Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

      There are only two ways to order these fittings and hose:

      1. Bring or mail us your old hose to match.
      2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

      Fitting Thread Application Chart (GIF)

    • Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree
      Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree
      SKU-1061241
      x
                  

      Push-on style with 90° steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

      Socketless Push-On Application Chart (GIF)

      Socketless Push-On Assembly (GIF)

      Fitting Thread Size Guide (GIF)

      NPT Thread Size Chart (GIF)

    • Aeroquip FCE4032 Nickel 90 Degree Hose End Coupler Fitting, -6 AN
      Aeroquip FCE4032 Nickel 90 Degree Hose End Coupler Fitting, -6 AN
      SKU-61710160
      x
                  

      Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

      Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

      These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

      • -6 AN Aluminum
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Available in a Nickel corrosion resistant finish

      Fitting Thread Application Chart (GIF)

    • Aeroquip FBM4435 Black Hose End Coupler Fitting 90 Degree Angle -12 AN
      Aeroquip FBM4435 Black Hose End Coupler Fitting 90 Degree Angle -12 AN
      SKU-61710191
      x
                  

      This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617312).

      • -12 AN 
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • Unique taper design ensures easy assembly
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Accepts a variety of lightweight aluminum AN style adapters & fittings
      • Available in a Black corrosion resistant finish

      90° Full Flow Ends come in sizes of AN6, AN8, AN10 and AN12.

      Fitting Thread Application Chart (GIF)

    • Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -16 AN
      Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -16 AN
      SKU-6171006
      x
                  

      This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and blue anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617316).

      • -16 AN 
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • Unique taper design ensures easy assembly
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Accepts a variety of lightweight aluminum AN style adapters & fittings
      • Available in Red/Blue corrosion resistant finish

      Straight full flow ends come in sizes of AN4, AN6, AN8, AN10, AN12, and AN16.

      Fitting Thread Application Chart (GIF)

    • Straight Socketless Reuseable Push-On Hose End for -10 AN Fitting
      Straight Socketless Reuseable Push-On Hose End for -10 AN Fitting
      SKU-1061234
      x
                  

      Push-on straight brass hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

      Socketless Push-On Application Chart (GIF)

      Socketless Push-On Assembly (GIF)

    • Teflon Hose Tool
      $39.99
      Product Rating: 5.00 Stars
      Teflon Hose Tool
      SKU-6173646
      x
                  This hand-held tool is designed to seat Teflon tube against a sleeve. Use with smooth-bore Teflon hose in sizes AN3, AN4, AN5, AN6, AN8, AN10 and AN12. 
              
    • Full Flow 90 Degree Socketless Reusable Fittings
      Full Flow 90 Degree Socketless Reusable Fittings
      SKU-106500454
      x
                  

      Full flow 90° elbow, AN male/female, steel.

      Socketless Fitting Application Chart (GIF)

      AN Thread Size Guide (GIF)

      Fitting Thread Size Guide (GIF)

    • Aeroquip FBM4033 Full Flow Hose End Coupler Fitting, 90 Degree, -8 AN
      Aeroquip FBM4033 Full Flow Hose End Coupler Fitting, 90 Degree, -8 AN
      SKU-6171017
      x
                  

      This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a blue/red anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617308).

      • -8 AN 
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • Unique taper design ensures easy assembly
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Accepts a variety of lightweight aluminum AN style adapters & fittings
      • Available in Blue/Red corrosion resistant finish

      90° Full Flow Ends come in sizes of AN4, AN6, AN8, AN10, AN12 and AN16.

      Fitting Thread Application Chart (GIF)

    • Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -10 AN
      Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -10 AN
      SKU-6171004
      x
                  

      This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and blue anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617310).

      • -10 AN female to push-on adapter
      • Straight style fuel line hose connector/coupler
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • Unique taper design ensures easy assembly
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Accepts a variety of lightweight aluminum AN style adapters & fittings
      • Available in Red/Blue corrosion resistant finish

      Straight full flow ends come in sizes of AN4, AN6, AN8, AN10, AN12, and AN16.

      Fitting Thread Application Chart (GIF)

    • Aeroquip FBM4211 Starlite Crimp Fitting, Straight, -4 AN
      Aeroquip FBM4211 Starlite Crimp Fitting, Straight, -4 AN
      SKU-6174211
      x
                  

      Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

      Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

      There are only two ways to order these fittings and hose:

      1. Bring or mail us your old hose to match.
      2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

      Fitting Thread Application Chart (GIF)

    • Aeroquip Stainless Steel Braided Low Pressure Hose, 1-13/16 Inch ID, AN32
      Aeroquip Stainless Steel Braided Low Pressure Hose, 1-13/16 Inch ID, AN32
      SKU-617332
      x
                  

      Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race applications.

      • Applications include fuel, lube, coolant, air
      • 50 PSI operating pressure
      • -45° to +300° F temperature rating
      • Made in the U.S.A.
      • Use with Aeroquip full flow hose ends

      Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

      Fitting Thread Application Chart (GIF)

    • Aeroquip FBM4212 Starlite Crimp Fitting, Straight, -6 AN
      Aeroquip FBM4212 Starlite Crimp Fitting, Straight, -6 AN
      SKU-6174212
      x
                  

      Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

      Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

      There are only two ways to order these fittings and hose:

      1. Bring or mail us your old hose to match.
      2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

      Fitting Thread Application Chart (GIF)

    • Straight 10MM-1.0 European to AN4 Male Adapter
      Straight 10MM-1.0 European to AN4 Male Adapter
      SKU-6174042
      x
                  AN male all Steel adapters sold in pairs.
              
    • Aeroquip FCE1532 Nickel 90 Degree Push-On Socketless Fitting, -6 AN
      Aeroquip FCE1532 Nickel 90 Degree Push-On Socketless Fitting, -6 AN
      SKU-6171532
      x
                  

      Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

      Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

      Socketless Fitting Application Chart (GIF)

    • Aeroquip FCF1003 Stainless Steel Braided AC Hose, -10 AN, 3 Ft. Length
      Aeroquip FCF1003 Stainless Steel Braided AC Hose, -10 AN, 3 Ft. Length
      SKU-617103
      x
                  This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.
              
    • Aeroquip FCE1014 Nickel Straight Hose End Coupler Fitting, -10 AN
      Aeroquip FCE1014 Nickel Straight Hose End Coupler Fitting, -10 AN
      SKU-61710040
      x
                  

      Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

      Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

      These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617310).

      • -10 AN Aluminum
      • Lightweight aluminum hose ends are completely reusable, and interchangeable
      • 37° angled sealing surface guarantees a positive anti-leak seal
      • Available in a Nickel corrosion resistant finish

      Fitting Thread Application Chart (GIF)

    • Straight Nickel Plated AC Fitting w/Port, -6 AN to -6 AN
      Straight Nickel Plated AC Fitting w/Port, -6 AN to -6 AN
      SKU-6171912
      x
                  These handsome nickel plated steel fittings are reuseable. This AN6 straight fitting features a high side R134a port.
              
    • Aeroquip FBU0400 Starlite Hose, -4 AN
      Aeroquip FBU0400 Starlite Hose, -4 AN
      SKU-617404
      x
                  

      Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

      NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

      Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

      There are only two ways to order these fittings and hose:

      1. Bring or send us your old hose to match.
      2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    • Aeroquip FBM4243 Starlite Crimp Fitting, 120 Degree, -8 AN
      Aeroquip FBM4243 Starlite Crimp Fitting, 120 Degree, -8 AN
      SKU-6174243
      x
                  

      Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

      Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

      There are only two ways to order these fittings and hose:

      1. Bring or mail us your old hose to match.
      2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

      Fitting Thread Application Chart (GIF)

    Goto Previous PagePrevious Page
    1 2 3 4 5 6 7