Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Aeroquip Products At Speedway Motors

Eatons Aeroquip name represents quality and innovation in the hydraulics industry. Eaton offers Aeroquip hose, fittings, adapters, couplings and fluid connectors for all pressures in industrial, aerospace and automotive applications. Aeroquip continues to strive in building the best hoses out there, the Aeroquip starlite hose continues to set the standards in the hose industry.

"Aeroquip Fittings and Hose" Page 1 of 4

  • Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    (Part #6174255)
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree
    Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree
    (Part #1061440)
    x
                

    45° push-on style steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils. 

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

  • Aeroquip FCE1524 Nickel 45 Deg Push-On Hose Socketless Fitting, -10 AN
    Aeroquip FCE1524 Nickel 45 Deg Push-On Hose Socketless Fitting, -10 AN
    (Part #6171524)
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    Socketless Fitting Application Chart (GIF)

  • Aeroquip FBM4043 Hose End Coupler Fitting, 120 Degree, Blue/Red, -8 AN
    Aeroquip FBM4043 Hose End Coupler Fitting, 120 Degree, Blue/Red, -8 AN
    (Part #6171023)
    x
                

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in red/blue anodized finishes.

    • 120 Degree 
    • Aluminum
    • Hose End Size: -8 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -8 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Blue/Red corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCE1513 Nickel Straight Push-On Hose Socketless Fitting -8 AN
    Aeroquip FCE1513 Nickel Straight Push-On Hose Socketless Fitting -8 AN
    (Part #6171513)
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    Socketless Fitting Application Chart (GIF)

  • Aeroquip FCE4023 Nickel 45 Degree Hose End Coupler Fitting, -8 AN
    Aeroquip FCE4023 Nickel 45 Degree Hose End Coupler Fitting, -8 AN
    (Part #61710100)
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617308).

    • -8 AN Aluminum
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Nickel corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4062 Hose End Coupler Fitting, 180 Degree, Blue/Red, -6 AN
    Aeroquip FBM4062 Hose End Coupler Fitting, 180 Degree, Blue/Red, -6 AN
    (Part #6171026)
    x
                

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in red/blue anodized finishes.

    • 180 Degree 
    • Aluminum
    • Hose End Size: -6 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -6 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in a Red/Blue corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -4 AN
    Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -4 AN
    (Part #6171001)
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and silver anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617304).

    • -4 AN female to push-on adapter
    • Straight style fuel line hose connector/coupler
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Red/Silver corrosion resistant finish

    Straight full flow ends come in sizes of AN4, AN6, AN8, AN10, AN12, and AN16.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCE4035 Nickel Plated -12 AN Hose End Fitting, 90 Degree
    Aeroquip FCE4035 Nickel Plated -12 AN Hose End Fitting, 90 Degree
    (Part #61710190)
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617312).

    • -12 AN Aluminum
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Nickel corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
    Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
    (Part #6174242)
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Socketless Reusable Push-On Hose End for -6 AN Fitting, 90 Degree
    Socketless Reusable Push-On Hose End for -6 AN Fitting, 90 Degree
    (Part #1061242)
    x
                

    Push-on style with 90° steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

  • Aeroquip FBM4463 Black Hose End Coupler Fitting 180 Degree Angle -8 AN
    Aeroquip FBM4463 Black Hose End Coupler Fitting 180 Degree Angle -8 AN
    (Part #61710271)
    x
                

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in black anodized finish.

    • 180 Degree 
    • Aluminum
    • Hose End Size: -8 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -8 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in a Black corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4045 120   Hose End Coupler Fitting, Blue/Red, -12 AN
    Aeroquip FBM4045 120 Hose End Coupler Fitting, Blue/Red, -12 AN
    (Part #6171025)
    x
                

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in red/blue anodized finishes.

    • 120 Degree 
    • Aluminum
    • Hose End Size: -12 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -12 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Blue/Red corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCE1533 Nickel 90 Degree Push-On Socketless Fitting, -8 AN
    Aeroquip FCE1533 Nickel 90 Degree Push-On Socketless Fitting, -8 AN
    (Part #6171533)
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    Socketless Fitting Application Chart (GIF)

  • Aeroquip FBM4234 Starlite Crimp Fitting, 90 Degree, -10 AN
    Aeroquip FBM4234 Starlite Crimp Fitting, 90 Degree, -10 AN
    (Part #6174234)
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree
    Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree
    (Part #1061241)
    x
                

    Push-on style with 90° steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

    Fitting Thread Size Guide (GIF)

    NPT Thread Size Chart (GIF)

  • Aeroquip FCE4032 Nickel 90 Degree Hose End Coupler Fitting, -6 AN
    Aeroquip FCE4032 Nickel 90 Degree Hose End Coupler Fitting, -6 AN
    (Part #61710160)
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

    • -6 AN Aluminum
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Nickel corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4435 Black Hose End Coupler Fitting 90 Degree Angle -12 AN
    Aeroquip FBM4435 Black Hose End Coupler Fitting 90 Degree Angle -12 AN
    (Part #61710191)
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617312).

    • -12 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in a Black corrosion resistant finish

    90° Full Flow Ends come in sizes of AN6, AN8, AN10 and AN12.

    Fitting Thread Application Chart (GIF)

  • Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -16 AN
    Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -16 AN
    (Part #6171006)
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and blue anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617316).

    • -16 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Red/Blue corrosion resistant finish

    Straight full flow ends come in sizes of AN4, AN6, AN8, AN10, AN12, and AN16.

    Fitting Thread Application Chart (GIF)

  • Straight Socketless Reuseable Push-On Hose End for -10 AN Fitting
    Straight Socketless Reuseable Push-On Hose End for -10 AN Fitting
    (Part #1061234)
    x
                

    Push-on straight brass hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

  • Aeroquip FBM4033 Full Flow Hose End Coupler Fitting, 90 Degree, -8 AN
    Aeroquip FBM4033 Full Flow Hose End Coupler Fitting, 90 Degree, -8 AN
    (Part #6171017)
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a blue/red anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617308).

    • -8 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Blue/Red corrosion resistant finish

    90° Full Flow Ends come in sizes of AN4, AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

  • Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -10 AN
    Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -10 AN
    (Part #6171004)
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and blue anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617310).

    • -10 AN female to push-on adapter
    • Straight style fuel line hose connector/coupler
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Red/Blue corrosion resistant finish

    Straight full flow ends come in sizes of AN4, AN6, AN8, AN10, AN12, and AN16.

    Fitting Thread Application Chart (GIF)

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 1-13/16 Inch ID, AN32
    Aeroquip Stainless Steel Braided Low Pressure Hose, 1-13/16 Inch ID, AN32
    (Part #617332)
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race applications.

    • Applications include fuel, lube, coolant, air
    • 50 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCE1532 Nickel 90 Degree Push-On Socketless Fitting, -6 AN
    Aeroquip FCE1532 Nickel 90 Degree Push-On Socketless Fitting, -6 AN
    (Part #6171532)
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    Socketless Fitting Application Chart (GIF)

  • Aeroquip FCE1014 Nickel Straight Hose End Coupler Fitting, -10 AN
    Aeroquip FCE1014 Nickel Straight Hose End Coupler Fitting, -10 AN
    (Part #61710040)
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617310).

    • -10 AN Aluminum
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Nickel corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4243 Starlite Crimp Fitting, 120 Degree, -8 AN
    Aeroquip FBM4243 Starlite Crimp Fitting, 120 Degree, -8 AN
    (Part #6174243)
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCC0610 -6 AN TFE Braided Hi Pressure Hose, 11/32 In ID-10 Ft
    Aeroquip FCC0610 -6 AN TFE Braided Hi Pressure Hose, 11/32 In ID-10 Ft
    (Part #6173262)
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Use with either crimp or reusable fittings.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBG0600 FC300 High Pressure Hose, -6 AN, Per Ft.
    Aeroquip FBG0600 FC300 High Pressure Hose, -6 AN, Per Ft.
    (Part #106FC300)
    x
                

    Aeroquip FC 300 hose is designed for high pressure fluid applications such as power steering line. The FC300 hose features a blue, abrasion-resistant fabric cover over a synthetic rubber inner tube for longer life. This high pressure hose is ideal for power steering, hydraulics, air, fuel and lubricating oil applications.

    • Max operating pressure is 2250 psi
    • Minimum bend radius is 4"
    • Temperature range of -55°F to +300°F
    • Hose is sold by the foot

    Note: The FC300 Hose only works with FC300 steel fittings (not included). Easily assembles with a bench vise and/or wrenches. Ends are reusable.

    AN Thread Sizing Guide (GIF)

    AN 6 Hose Application Chart (GIF)

  • Aeroquip FBM4121 Starlite Crimp Fitting, 45 Degree, -4 AN
    Aeroquip FBM4121 Starlite Crimp Fitting, 45 Degree, -4 AN
    (Part #6174221)
    x
                Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. 

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping

    Fitting Thread Application Chart (GIF)

  • Straight Socketless Reuseable Push-On Hose End for -8 AN Fitting
    Straight Socketless Reuseable Push-On Hose End for -8 AN Fitting
    (Part #1061233)
    x
                

    Push-on straight brass hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

  • Aluminum Flare Bulkhead Fitting, 90 Degree, -12 AN
    Aluminum Flare Bulkhead Fitting, 90 Degree, -12 AN
    (Part #6176128)
    x
                

    Aluminum 90° degree bend bulkhead fitting for 37° AN flares.

    AN Thread Sizing Guide (GIF)

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4422 Black Hose End Coupler Fitting-45 Degree Angle, -6 AN
    Aeroquip FBM4422 Black Hose End Coupler Fitting-45 Degree Angle, -6 AN
    (Part #61710091)
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

    • -6 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Black corrosion resistant finish

    45° Full Flow Ends come in sizes of AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

  • Aeroquip Special Application Socketless AN Hose, Black
    Aeroquip Special Application Socketless AN Hose, Black
    (Part #106333)
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!
  • Construction: AQP elastomer tube, textile braid reinforcement, black AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

    Hose Fitting Sizing Chart (GIF)

  • Aeroquip FBM4413 Straight Swivel Hose End Coupler Fitting-Black, -8 AN
    Aeroquip FBM4413 Straight Swivel Hose End Coupler Fitting-Black, -8 AN
    (Part #61710031)
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617308).

    • -8 AN
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Black corrosion resistant finish

    Straight full flow ends come in sizes of AN6, AN8, AN10, AN12, and AN16.

    Full Swivel Application Chart (GIF)

  • Straight Socketless Push-On Fitting, 30 Degree Taper, -6 AN to 3/8 NPT
    Straight Socketless Push-On Fitting, 30 Degree Taper, -6 AN to 3/8 NPT
    (Part #1061202)
    x
                

    Male push-on style fitting with straight steel AN hose ends in brass.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)


    Fitting Thread Size Guide (GIF)

    NPT Thread Size Chart (GIF)

  • Aeroquip FCC0606 -6 AN TFE Braided Hi Pressure Hose 11/32 Inch ID 6 Ft
    Aeroquip FCC0606 -6 AN TFE Braided Hi Pressure Hose 11/32 Inch ID 6 Ft
    (Part #6173261)
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Use with either crimp or reusable fittings.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4034 Hose End Coupler Fitting, 90 Degree, Blue/Red, -10 AN
    Aeroquip FBM4034 Hose End Coupler Fitting, 90 Degree, Blue/Red, -10 AN
    (Part #6171018)
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a blue/red anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617310).

    • -10 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Blue/Red corrosion resistant finish

    90° Full Flow Ends come in sizes of AN4, AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

  • 3/4 NPT to -6 AN Fitting
    $6.99
    3/4 NPT to -6 AN Fitting
    (Part #106202112)
    x
                3/4" NPT to AN6 fitting for return line.
            
  • Aeroquip FBC0600 -6 AN TFE Braided High Pressure Hose, 11/32 Inch ID
    Aeroquip FBC0600 -6 AN TFE Braided High Pressure Hose, 11/32 Inch ID
    (Part #6173259)
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Sold by the foot and use with either crimp or reusable fittings to make your own custom power steering line.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM1023 45 Degree Hose End Coupler Fitting, Red/Blue, -8 AN
    Aeroquip FBM1023 45 Degree Hose End Coupler Fitting, Red/Blue, -8 AN
    (Part #6171010)
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and blue anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617308).

    • -8 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Red/Blue corrosion resistant finish

    45° Full Flow Ends come in sizes of AN4,AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

Goto Previous PagePrevious Page
1 2 3 4