Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Aeroquip Products At Speedway Motors

Eatons Aeroquip name represents quality and innovation in the hydraulics industry. Eaton offers Aeroquip hose, fittings, adapters, couplings and fluid connectors for all pressures in industrial, aerospace and automotive applications. Aeroquip continues to strive in building the best hoses out there, the Aeroquip starlite hose continues to set the standards in the hose industry.

"Aeroquip Fittings and Hose" Page 1 of 1

  • Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree
    Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree
    x
                

    Push-on style with 90° steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

    Fitting Thread Size Guide (GIF)

    NPT Thread Size Chart (GIF)

  • Aeroquip FBM4435 Black Hose End Coupler Fitting 90 Degree Angle -12 AN
    Aeroquip FBM4435 Black Hose End Coupler Fitting 90 Degree Angle -12 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617312).

    • -12 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in a Black corrosion resistant finish

    90° Full Flow Ends come in sizes of AN6, AN8, AN10 and AN12.

    Fitting Thread Application Chart (GIF)

  • Straight Socketless Reuseable Push-On Hose End for -10 AN Fitting
    Straight Socketless Reuseable Push-On Hose End for -10 AN Fitting
    x
                

    Push-on straight brass hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

  • Aeroquip FBM4033 Full Flow Hose End Coupler Fitting, 90 Degree, -8 AN
    Aeroquip FBM4033 Full Flow Hose End Coupler Fitting, 90 Degree, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a blue/red anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617308).

    • -8 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Blue/Red corrosion resistant finish

    90° Full Flow Ends come in sizes of AN4, AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4422 Black Hose End Coupler Fitting-45 Degree Angle, -6 AN
    Aeroquip FBM4422 Black Hose End Coupler Fitting-45 Degree Angle, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

    • -6 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Black corrosion resistant finish

    45° Full Flow Ends come in sizes of AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

  • Straight Socketless Push-On Fitting, 30 Degree Taper, -6 AN to 3/8 NPT
    Straight Socketless Push-On Fitting, 30 Degree Taper, -6 AN to 3/8 NPT
    x
                

    Male push-on style fitting with straight steel AN hose ends in brass.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)


    Fitting Thread Size Guide (GIF)

    NPT Thread Size Chart (GIF)

  • 3/4 NPT to -6 AN Fitting
    $6.99
    3/4 NPT to -6 AN Fitting
    x
                3/4" NPT to AN6 fitting for return line.
            
  • Aeroquip FBM4416 Black Straight Swivel Hose End Coupler Fitting -16 AN
    Aeroquip FBM4416 Black Straight Swivel Hose End Coupler Fitting -16 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617316).

    • -16 AN
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Black corrosion resistant finish

    Straight full flow ends come in sizes of AN6, AN8, AN10, AN12, and AN16.

    Full Swivel Application Chart (GIF)

  • Aeroquip FBM4424 Black Hose End Coupler Fitting 45 Degree Angle -10 AN
    Aeroquip FBM4424 Black Hose End Coupler Fitting 45 Degree Angle -10 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617310).

    • -10 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Black corrosion resistant finish

    45° Full Flow Ends come in sizes of AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4433 Black Hose End Coupler Fitting-90 Degree Angle, -8 AN
    Aeroquip FBM4433 Black Hose End Coupler Fitting-90 Degree Angle, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617308).

    • -8 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in a Black corrosion resistant finish

    90° Full Flow Ends come in sizes of AN6, AN8, AN10 and AN12.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4066 180   Hose End Coupler Fitting, Blue/Red, -16 AN
    Aeroquip FBM4066 180 Hose End Coupler Fitting, Blue/Red, -16 AN
    x
                

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in red/blue anodized finishes.

    • 180 Degree 
    • Aluminum
    • Hose End Size: -16 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -16 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in a Red/Blue corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4465 Hose End Coupler Fitting, 180 Degree, Black, -12 AN
    Aeroquip FBM4465 Hose End Coupler Fitting, 180 Degree, Black, -12 AN
    x
                

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in black anodized finish.

    • 180 Degree 
    • Aluminum
    • Hose End Size: -12 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -12 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in a Black corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4426 Black Hose End Coupler Fitting 45 Degree Angle -16 AN
    Aeroquip FBM4426 Black Hose End Coupler Fitting 45 Degree Angle -16 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617316).

    • -16 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Black corrosion resistant finish

    45° Full Flow Ends come in sizes of AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4446 Hose End Coupler Fitting, 120 Degree, Black, -16 AN
    Aeroquip FBM4446 Hose End Coupler Fitting, 120 Degree, Black, -16 AN
    x
                

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in black anodized finishes.

    • 120 Degree 
    • Aluminum
    • Hose End Size: -16 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -16 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in a Black corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Straight Socketless Push-On Fitting, 30 Degree Taper, -12 AN to 3/4 NPT
    Straight Socketless Push-On Fitting, 30 Degree Taper, -12 AN to 3/4 NPT
    x
                

    Male push-on style fitting with straight steel AN hose ends in brass.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

    Fitting Thread Size Guide (GIF)

    NPT Thread Size Chart (GIF)

  • Aeroquip Blue -8 AN Female to 9/16-24 Alum Fitting-Holley/Demon Carb.
    Aeroquip Blue -8 AN Female to 9/16-24 Alum Fitting-Holley/Demon Carb.
    x
                Aluminum fuel fittings for Holley or Demon carburetors, and other   applications with 9/16”-24 or 7/8"-20 threads. Fittings feature a female   AN 8 swivel.
            
  • Aeroquip FBM4443 Black Hose End Coupler Fitting 120 Degree Angle -8 AN
    Aeroquip FBM4443 Black Hose End Coupler Fitting 120 Degree Angle -8 AN
    x
                

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in black anodized finishes.

    • 120 Degree 
    • Aluminum
    • Hose End Size: -8 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -8 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in a Black corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Socketless Reusable Push-On Hose End for -4 AN Fitting, 45 Degree
    Socketless Reusable Push-On Hose End for -4 AN Fitting, 45 Degree
    x
                

    45° push-on style steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils. 

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

  • Aeroquip FBM4432 Black Hose End Coupler Fitting-90 Degree Angle, -6 AN
    Aeroquip FBM4432 Black Hose End Coupler Fitting-90 Degree Angle, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

    • -6 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in a Black corrosion resistant finish

    90° Full Flow Ends come in sizes of AN6, AN8, AN10 and AN12.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4415 Black Straight Swivel Hose End Coupler Fitting -12 AN
    Aeroquip FBM4415 Black Straight Swivel Hose End Coupler Fitting -12 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617312).

    • -12 AN
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Black corrosion resistant finish

    Straight full flow ends come in sizes of AN6, AN8, AN10, AN12, and AN16.

    Full Swivel Application Chart (GIF)

  • Aeroquip FBM4423 Black Hose End Coupler Fitting-45 Degree Angle, -8 AN
    Aeroquip FBM4423 Black Hose End Coupler Fitting-45 Degree Angle, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617308).

    • -8 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Black corrosion resistant finish

    45° Full Flow Ends come in sizes of AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4032 Full Flow Hose End Coupler Fitting, 90 Degree, -6 AN
    Aeroquip FBM4032 Full Flow Hose End Coupler Fitting, 90 Degree, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a blue/red anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

    • -6 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Blue/Red corrosion resistant finish

    90° Full Flow Ends come in sizes of AN4, AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4412 Straight Swivel Hose End Coupler Fitting-Black, -6 AN
    Aeroquip FBM4412 Straight Swivel Hose End Coupler Fitting-Black, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

    • -6 AN
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Black corrosion resistant finish

    Straight full flow ends come in sizes of AN6, AN8, AN10, AN12, and AN16.

    Full Swivel Application Chart (GIF)

  • Garage Sale - Aeroquip FBM4442 Black Hose End Coupler Fitting 120 Degree Angle -6 AN
    Garage Sale
    Garage Sale - Aeroquip FBM4442 Black Hose End Coupler Fitting 120 Degree Angle -6 AN
    x
                Please view the product's page for more information