Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop ACCEL Products At Speedway Motors

ACCEL Ignition has been dedicated to delivering the best ignition products for the automotive performance industry. ACCEL's innovations in ignition has built the name that racers everywhere have come to love and trust.

Featured Products
Accel 8024 8.8mm Spark Plug Wires-90 Degree Boot-Solid Core-Universal
Accel 8024 8.8mm Spark Plug Wires-90 Degree Boot-Solid Core-Universal
(Part #1058024)
x
            

For high performance ignition wire, there is simply no alternative to Accel 8.8 spark plug wires.

  • Silver plated copper is combined with a tough inner stainless steel core
  • Ultra strong fiberglass braiding provides unequalled tensile strength and resistance to "wire stretch"
  • Extra thick 8.8mm double-silicone insulation and unique silicone boots provide high dielectric strength and eliminates voltage leaks
  • Delivers peak performance even at temperatures over 500 degrees
  • Non RFI suppression
  • Works with HEI and Socket style caps

Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

Accel 170072 HEI Wiring Pigtail
Accel 170072 HEI Wiring Pigtail
(Part #105170072)
x
            

Finally, a dual HEI connector for GM HEI “Coil In-Cap”. The Dual HEI Connector helps clean up your engine bay by eliminating the use of single spade connectors to make battery and tachometer connections. Also holds the 12 volt and tachometer wires securely in place. Made from hi-temperature durable plastic to withstand all extreme conditions of an engine bay. The easily seen, 10” long, red and green wires identify battery and tachometer.

  • Wire your HEI distributor like the factory
  • Red and green wires identify battery and tach leads
  • 10" long
Accel 9001C Extreme 9000 Universal Pro Fit Ceramic Spark Plug Wire Set
Accel 9001C Extreme 9000 Universal Pro Fit Ceramic Spark Plug Wire Set
(Part #1059001)
x
            

Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic Wire kits. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

  • 8mm Ferro-Spiral EMI/RFI suppression core
  • 500 Ohms/ft resistance
  • 90 degree ceramic boots will withstand 2000° F
  • Stainless terminals
  • Includes ends for HEI (male) and socket (female) distributors

Ceramic Wire Core Cut-A-Way (Link)

Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

Accel 9002C Xtreme 9000 Univ. Ceramic Spark Plug Wire Set, 115 Boot
Accel 9002C Xtreme 9000 Univ. Ceramic Spark Plug Wire Set, 115 Boot
(Part #1059002)
x
            

Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic Wire kits. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

  • 8mm Ferro-Spiral EMI/RFI supression core
  • 500 Ohms/ft resistance
  • Ceramic boots will withstand 2000° F
  • Stainless terminals
  • Includes ends for HEI (male) and socket (female) distributors

Ceramic Wire Core Cut-A-Way (Link)

Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

"Accel" Page 1 of 1

  • Accel 8023 8.8 Spiral Core Spark Plug Wires, HEI, Straight Boot
    Accel 8023 8.8 Spiral Core Spark Plug Wires, HEI, Straight Boot
    (Part #1058023)
    x
                

    Makes power, not static.  With today's mega-watt, ultra-sensitive car stereo systems, that means "hiss-free" high fidelity. Thanks to a special graphite-impregnated fiberglass conductor, ACCEL 8.8 wire has the structural integrity to handle the high performance that can cause other wires to self-destruct.  Yellow only.

    • Rated to 550 degrees F
    • 8.8mm yellow high temp silicone jacket
    • For race and street applications
    • 500 ohm/ft. RFI suppression
    • Red plug boots

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 9011C GM HEI 75-86 Extreme 9000 Spark Plug Wires-Over Valve
    Accel 9011C GM HEI 75-86 Extreme 9000 Spark Plug Wires-Over Valve
    (Part #1059011)
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic spark plug wire set. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI supression core
    • 500 Ohms/ft resistance
    • Ceramic boots will withstand 2000° F
    • Stainless terminals
    • For 1975-86 GM small block V8 HEI (over valve covers)

    Ceramic Wire Core Cut-A-Way (Link)

  • Accel 9000C Universal Ceramic Spark Plug Wires, Straight, Extreme 9000
    Accel 9000C Universal Ceramic Spark Plug Wires, Straight, Extreme 9000
    (Part #1059000)
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic Wire kits. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI suppression core
    • 500 Ohms/ft resistance
    • Straight ceramic boots will withstand 2000° F
    • Stainless terminals
    • Includes ends for HEI (male) and socket (female) distributors

    Ceramic Wire Core Cut-A-Way (Link)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 8021 8.8 Spiral Core Spark Plug Wires, HEI, 90 Degree Boot
    Accel 8021 8.8 Spiral Core Spark Plug Wires, HEI, 90 Degree Boot
    (Part #1058021)
    x
                

    Makes power, not static.  With today's mega-watt, ultra-sensitive car stereo systems, that means "hiss-free" high fidelity. Thanks to a special graphite-impregnated fiberglass conductor, ACCEL 8.8 wire has the structural integrity to handle the high performance that can cause other wires to self-destruct.  Yellow only.

    • Rated to 550 degrees F
    • 8.8mm yellow high temp silicone jacket
    • For race and street applications
    • 500 ohm/ft. RFI suppression
    • Red plug boots

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 0134-4 U-Groove Spark Plug,14mm,13/16 Hex 3/8 Reach, Gasket Seat
    Accel 0134-4 U-Groove Spark Plug,14mm,13/16 Hex 3/8 Reach, Gasket Seat
    (Part #105134)
    x
                

    Accel's patented U-groove design provides a hotter spark and increased horsepower. 

    U-Groove Benefits:

    • More power to the wheels
    • Improved ignitability
    • Improved throttle response and fuel efficiency
    • Develops larger spark nucleus for improved combustion and reduced fouling 
  • Accel 170018 Spark Plug Wire Markers
    Accel 170018 Spark Plug Wire Markers
    (Part #105170018)
    x
                Eliminate firing order errors with the use of ACCEL wire markers. They are oil and grease resistant and easily read with black numbers on white rings. Set of eight (8).    
            
  • Accel 9001C Extreme 9000 Universal Pro Fit Ceramic Spark Plug Wire Set
    Accel 9001C Extreme 9000 Universal Pro Fit Ceramic Spark Plug Wire Set
    (Part #1059001)
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic Wire kits. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI suppression core
    • 500 Ohms/ft resistance
    • 90 degree ceramic boots will withstand 2000° F
    • Stainless terminals
    • Includes ends for HEI (male) and socket (female) distributors

    Ceramic Wire Core Cut-A-Way (Link)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 0124-4 U-Groove Spark Plug,14mm,13/16 Hex,3/8 Reach, Gasket Seat
    Accel 0124-4 U-Groove Spark Plug,14mm,13/16 Hex,3/8 Reach, Gasket Seat
    (Part #105123)
    x
                

    Accel's patented U-groove design provides a hotter spark and increased horsepower. 

    U-Groove Benefits:

    • More power to the wheels
    • Improved ignitability
    • Improved throttle response and fuel efficiency
    • Develops larger spark nucleus for improved combustion and reduced fouling 
  • Accel 8020 8.8 Spiral Core Spark Plug Wires, Socket Cap, 90 Deg Boot
    Accel 8020 8.8 Spiral Core Spark Plug Wires, Socket Cap, 90 Deg Boot
    (Part #1058020)
    x
                

    Makes power, not static.  With today's mega-watt, ultra-sensitive car stereo systems, that means "hiss-free" high fidelity. Thanks to a special graphite-impregnated fiberglass conductor, ACCEL 8.8 wire has the structural integrity to handle the high performance that can cause other wires to self-destruct.  Yellow only.

    • Rated to 550 degrees F
    • 8.8mm yellow high temp silicone jacket
    • For race and street applications
    • 500 ohm/ft. RFI suppression
    • Red plug boots

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 1858 Red Heat Shrink Sleeves, 4 Pack
    Accel 1858 Red Heat Shrink Sleeves, 4 Pack
    (Part #1051858)
    x
                

    These red shrink tubes work perfect for sealing battery terminal connections.  They protect battery to cable connections by creating a water tight seal. 

    • Ideal for use on battery cable connections or spark plug wires
    • 4 sleeves in a kit at 4 inches long each
  • Accel 9018C GM HEI 75-86 Extreme 9000 Ceramic Plug Wires, Under Valve
    Accel 9018C GM HEI 75-86 Extreme 9000 Ceramic Plug Wires, Under Valve
    (Part #1059018)
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic spark plug wire set. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI supression core
    • 500 Ohms/ft resistance
    • Ceramic boots will withstand 2000° F
    • Stainless terminals
    • For 1975-86 GM small block V8 HEI (under valve covers)

    Ceramic Wire Core Cut-A-Way (Link)

  • Accel 0114-4 14mm U-Groove Spark Plug-13/16 Hex, 3/4 Reach Gasket Seat
    Accel 0114-4 14mm U-Groove Spark Plug-13/16 Hex, 3/4 Reach Gasket Seat
    (Part #105114)
    x
                

    Accel's patented U-groove design provides a hotter spark and increased horsepower. 

    U-Groove Benefits:

    • More power to the wheels
    • Improved ignitability
    • Improved throttle response and fuel efficiency
    • Develops larger spark nucleus for improved combustion and reduced fouling 
  • Accel 35361 GM HEI Ignition Module, 1974-95
    Accel 35361 GM HEI Ignition Module, 1974-95
    (Part #10535361)
    x
                Accel control modules provide high coil output & superior reliability. Dwell circuit ensures long coil charging. Current circuit protects from overheating. Resists false triggering from RFI sources. Distributor and remote mounts available. 
            
  • Accel 0576S-4 U-Groove Shorty Spark Plug, 5/8 Hex, .460 Reach, Tapered
    Accel 0576S-4 U-Groove Shorty Spark Plug, 5/8 Hex, .460 Reach, Tapered
    (Part #105576S)
    x
                

    Accel's race proven U-Groove "Shorty" spark plugs are the cure for your "burnt plug boot" blues. The overall length has been reduced 1/4" to 3/8" to gain critical air gap space between the spark plug boot and the exhaust header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install and remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around.

    These retain Accel's patented U-groove design and are so well designed, one plug will cover several heat ranges.

    Accel's U-Groove design benefits:

    • More power to the wheelsImproved ignitability
    • Improved throttle response and better fuel efficiency
    • Develops larger spark nucleus for improved combustion and reduced fouling

    105-576S

    • AC = CR45TS, R44TS, R45TS
    • Champion = RV15YC
    • Autolite = 15, 25, 26, 665, 666, 725, 726

     

  • Accel 9002C Xtreme 9000 Univ. Ceramic Spark Plug Wire Set, 115 Boot
    Accel 9002C Xtreme 9000 Univ. Ceramic Spark Plug Wire Set, 115 Boot
    (Part #1059002)
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic Wire kits. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI supression core
    • 500 Ohms/ft resistance
    • Ceramic boots will withstand 2000° F
    • Stainless terminals
    • Includes ends for HEI (male) and socket (female) distributors

    Ceramic Wire Core Cut-A-Way (Link)

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 8025 8.8 Universal Solid Core Spark Plug Wire Set, Straight Boot
    Accel 8025 8.8 Universal Solid Core Spark Plug Wire Set, Straight Boot
    (Part #1058025)
    x
                For high performance ignition wire, there is simply no alternative to Accel 8.8 spark plug wires. 
    • Silver plated copper is combined with a tough inner stainless steel core
    • Ultra strong fiberglass braiding provides unequalled tensile strength and resistance to "wire stretch"
    • Extra thick 8.8mm double-silicone insulation and unique silicone boots provide high dielectric strength and eliminates voltage leaks
    • Temperature Resistance-ACCEL 8.8 wire delivers peak performance even at temperatures over 500 degrees
    • Non RFI suppression
    • Works with HEI or Socket style caps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 0437S-4 U-Groove Shorty Spark Plug, 13/16 Hex, 3/8 Reach, Gasket
    Accel 0437S-4 U-Groove Shorty Spark Plug, 13/16 Hex, 3/8 Reach, Gasket
    (Part #105437S)
    x
                

    Accel's race proven U-Groove "Shorty" spark plugs are the cure for your "burnt plug boot" blues. The overall length has been reduced 1/4" to 3/8" to gain critical air gap space between the spark plug boot and the exhaust header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install and remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around.

    These retain Accel's patented U-groove design and are so well designed, one plug will cover several heat ranges.

    Accel's U-Groove design benefits:

    • More power to the wheels with improved ignitability
    • Improved throttle response and better fuel efficiency
    • Develops larger spark nucleus for improved combustion and reduced fouling

    105-437S Accel plugs are compatible with:

    • AC = R43CS, R43S, R44SX, R45S
    • Autolite = 565, 566, 85, 86
    • Champion = RJ11YC, RJ12YC, RJ12YC6
  • Accel 0566-4 14mm U-Groove Spark Plug-5/8 Hex, .460 Reach Tapered Seat
    Accel 0566-4 14mm U-Groove Spark Plug-5/8 Hex, .460 Reach Tapered Seat
    (Part #105262)
    x
                

    Accel's patented U-groove design provides a hotter spark and increased horsepower. 

    U-Groove Benefits:

    • More power to the wheels
    • Improved ignitability
    • Improved throttle response and fuel efficiency
    • Develops larger spark nucleus for improved combustion and reduced fouling 
  • Accel 35372 Electronic Breakerless Module, 52 Series
    Accel 35372 Electronic Breakerless Module, 52 Series
    (Part #10535372)
    x
                Replacement module for ACCEL 52 Series distributors. 
            
  • Accel 0574S-4 U-Groove Shorty Spark Plug, 5/8 Hex, .460 Reach, Tapered
    Accel 0574S-4 U-Groove Shorty Spark Plug, 5/8 Hex, .460 Reach, Tapered
    (Part #105574S)
    x
                

    Accel's race proven U-Groove "Shorty" spark plugs are the cure for your "burnt plug boot" blues. The overall length has been reduced 1/4" to 3/8" to gain critical air gap space between the spark plug boot and the exhaust header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install and remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around.

    These retain Accel's patented U-groove design and are so well designed, one plug will cover several heat ranges.

    Accel's U-Groove design benefits:

    • More power to the wheelsImproved ignitability
    • Improved throttle response and better fuel efficiency
    • Develops larger spark nucleus for improved combustion and reduced fouling

    105-574S

    • AC = CR43TS, R42CTS, R42TS, R42TSM, R43TS
    • Autolite = 23, 24, 203, 663

     

  • Accel 8024 8.8mm Spark Plug Wires-90 Degree Boot-Solid Core-Universal
    Accel 8024 8.8mm Spark Plug Wires-90 Degree Boot-Solid Core-Universal
    (Part #1058024)
    x
                

    For high performance ignition wire, there is simply no alternative to Accel 8.8 spark plug wires.

    • Silver plated copper is combined with a tough inner stainless steel core
    • Ultra strong fiberglass braiding provides unequalled tensile strength and resistance to "wire stretch"
    • Extra thick 8.8mm double-silicone insulation and unique silicone boots provide high dielectric strength and eliminates voltage leaks
    • Delivers peak performance even at temperatures over 500 degrees
    • Non RFI suppression
    • Works with HEI and Socket style caps

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • Accel 9024C Extreme 9000 1990-1995 GM 7.4L Ceramic Spark Plug Wire Set
    Accel 9024C Extreme 9000 1990-1995 GM 7.4L Ceramic Spark Plug Wire Set
    (Part #1059024)
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic Wire kits. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI supression core
    • 500 Ohms/ft resistance
    • Ceramic boots will withstand 2000° F
    • Stainless terminals

    Ceramic Wire Core Cut-A-Way (Link)

  • Accel 120405 Distributor Cap, 52 Series
    Accel 120405 Distributor Cap, 52 Series
    (Part #105120405)
    x
                
    • Performance replacement
    • Heavy duty for maximum energy transfer
  • Accel 170072 HEI Wiring Pigtail
    Accel 170072 HEI Wiring Pigtail
    (Part #105170072)
    x
                

    Finally, a dual HEI connector for GM HEI “Coil In-Cap”. The Dual HEI Connector helps clean up your engine bay by eliminating the use of single spade connectors to make battery and tachometer connections. Also holds the 12 volt and tachometer wires securely in place. Made from hi-temperature durable plastic to withstand all extreme conditions of an engine bay. The easily seen, 10” long, red and green wires identify battery and tachometer.

    • Wire your HEI distributor like the factory
    • Red and green wires identify battery and tach leads
    • 10" long
  • Accel 140003 GM High Energy HEI Super Coil, Red/Yellow
    Accel 140003 GM High Energy HEI Super Coil, Red/Yellow
    (Part #105140003)
    x
                Delivers more voltage for faster starting and more efficient combustion. Fits GM HEI '73-'91 vehicles. Features ultra-fine magnet wire, high strength case with cooling ribs, cap head through bolts and carbon brush spring and coil gasket. Street legal. 0.50 OHM. 
            
  • Accel 0276S-4 U-Groove Shorty Spark Plug, 5/8 Hex, .460 Reach, Tapered
    Accel 0276S-4 U-Groove Shorty Spark Plug, 5/8 Hex, .460 Reach, Tapered
    (Part #105276S)
    x
                

    Accel's race proven U-Groove "Shorty" spark plugs are the cure for your "burnt plug boot" blues. The overall length has been reduced 1/4" to 3/8" to gain critical air gap space between the spark plug boot and the exhaust header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install and remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around.

    These retain Accel's patented U-groove design and are so well designed, one plug will cover several heat ranges.

    Accel's U-Groove design benefits:

    • More power to the wheelsImproved ignitability
    • Improved throttle response and better fuel efficiency
    • Develops larger spark nucleus for improved combustion and reduced fouling

    105-276S

    • AC = 45TS, 46TS
    • Autolite = 16
    • Champion = BL13Y, Y12YC

     

  • Garage Sale - Accel 140003 GM High Energy HEI Super Coil, Red/Yellow
    Garage Sale
    Garage Sale - Accel 140003 GM High Energy HEI Super Coil, Red/Yellow
    (Part #UP47301)
    x
                

    This coil is garage sale priced because the mounting posts were broken off the coil over in shipping. 

      NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

    Delivers more voltage for faster starting and more efficient combustion. Fits GM HEI '73-'91 vehicles. Features ultra-fine magnet wire, high strength case with cooling ribs, cap head through bolts and carbon brush spring and coil gasket. Street legal. 0.50 OHM.

  • Garage Sale - Accel Racing Coil, 1957-1974 Ford
    Garage Sale
    Garage Sale - Accel Racing Coil, 1957-1974 Ford
    (Part #105140205)
    x
                

    Delivers increased voltage and higher spark energy than conventional coils.  Vacuum-filled with premium grade transformer oil.  Spring-loaded, special winding design and silica steel core eliminates failure due to sustained vibration.  Compatible with OEM internal resistance specifications.  For 1957-1974 Ford 12 volt.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Accel 140003 GM High Energy HEI Super Coil, Red/Yellow
    Garage Sale
    Garage Sale - Accel 140003 GM High Energy HEI Super Coil, Red/Yellow
    (Part #UP45984)
    x
                

    This is garage sale priced because it has a small crack.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

     

    Delivers more voltage for faster starting and more efficient combustion. Fits GM HEI '73-'91 vehicles. Features ultra-fine magnet wire, high strength case with cooling ribs, cap head through bolts and carbon brush spring and coil gasket. Street legal. 0.50 OHM. 

  • Accel 8mm Spark Plug Wires Sets, HEI Corrected
    Accel 8mm Spark Plug Wires Sets, HEI Corrected
    (Part #1055055)
    x
                

    These custom tailored spark plug wires are designed for use with Accel's HEI Corrected Distributor Cap. They feature Ferro-Spiral wire which delivers the maximum amount of energy with the highest level of RFI/EMI suppression. Fits GM HEI-equipped small block V8 engines with firing order 1-8-4-3-6-5-7-2 and a right hand distributor.

    Available in red or black color.

     

     

  • Accel 8141R HEI Corrected Cap Distributor Cap and Rotor Kit
    Accel 8141R HEI Corrected Cap Distributor Cap and Rotor Kit
    (Part #1058141)
    x
                

    Corrected Distributor Cap for GM HEI prevents arcing from crossover and keeps your engine compartment neat. These heavy duty distributor caps offer superior protection from arc-thru and crossfire. Kit components are made from a high-performance 60,000 volt alkyd compound which is stress-relieved at molding to ensure stability.

    • Eliminates crossed wires on GM HEI
    • Brass terminals
    • Red color
    • For clockwise rotation only

    105-8141 Instructions (PDF)