Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Seals-It EAS1-05 Universal Inner Axle Seal for 2.5-2.75 Inch Tube

Price:$24.99
Inner Axle Seal
Price:
$24.99
EA
In Stock
Item #:
9190970
Seals-It EAS1-05 Universal Inner Axle Seal for 2.5-2.75 Inch Tube
Click image to enlarge Click image to enlarge
No video at this time.
 
One size fits all! Fits any inner axle tube with an I.D. between 2-1/2" and 2-3/4". This eliminates ordering the wrong seal and allows you to always have the correct seal on hand. Typical applications* include Ford 9”, Quick change type rears, and 12 bolt GM. All seals are supplied with general installation guidelines.
  • Inner Axle Seal I.D. = 7/8"
  • Axle sizes/Splines:  1-3/16” thru 1-1/2” / 28-31

 

* Applications are reference only. Seals may be used on any rear end that is within the part number’s dimensional range. Rears can vary within a single model year and within the same model. Measure listed parameters before ordering.

  • 9190970
    Inside Diameter
    0.875" (7/8")
    Sold in Quantity
    Each
    Notes
    Fits axles with tube ID's between 2.500" and 2.750."
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
You May Also Be Interested In...
  • Lubrication Engineers 3752 LE Almagard Industrial Grease, 14.5 Oz
    Lubrication Engineers 3752 LE Almagard Industrial Grease, 14.5 Oz
    Price: $12.99
    More Info
    Lubrication Engineers 3752 LE Almagard Industrial Grease, 14.5 Oz
    x 
    							                        
    
                                                        
    Multifunctional grease designed for exceptional mechanical stability, excellent extreme pressure and high temperature capabilities. Won't wash off, pound out, or melt and run, even with extended service in severe conditions.
    • Use in all types of vehicles, on and off road, as well as in many in-plant applications
    • Very tacky
    • Excellent water resistance
    • Will not pound out
    • Rust and corrosion inhibited
    • Extremely versatile
    • Excellent oxidation resistance and rust protection
    • Great oxidation stability and longer life, does not "work down" in service
    • High dropping point
    • Good heat reversion
    • Does not harden on aging, easily pushed out by fresh grease
    • Timken OK load of 70 lbs
    • Bearing life may be extended up to three times with cooler operation
    • Reduces downtime and maintenance labor because of smooth, cool performance 
    • Works great for chassis, wheel bearings, U-joints
    LE Almagard Data Sheet (PDF)
  • Lubrication Engineers Rear End Lube, 140W, 1 Gallon
    Lubrication Engineers Rear End Lube, 140W, 1 Gallon
    Price: $49.99
    More Info
    Lubrication Engineers Rear End Lube, 140W, 1 Gallon
    x 
    							                        
    
                                                        
    Whether you're running a stock flattie and rearend or hopped-up overhead and quick change, you need to run a good gear lube. Remember that your rearend was designed fifty plus years ago and needs all the help it can get. The biggest improvement you can give it is a lubricant that will allow the gears to survive the highway speeds that cars see today. L.E. rear end lube is what we use in our 350 mph streamliner, that uses a V-8 quick change, without failure. The "red stuff" provides superior lubrication for long gear life. You can't win if you don't finish. We suggest 90 weight for the street and 140 weight for extreme uses.
    • Formulated using blends of high quality paraffinic and synthetic base fluids
    • Contains a highly shear stable tackiness
    • Unique blend of base fluids and thermally stable EP additives
    • Separates readily from water
    • Contains non-silicone defoaming additives
    • Contains no solids
    • Contains DUOLEC LE's proprietary dual acting liquid wear-reducing and extreme pressure additive
    LE Gear Lube Data Sheet (PDF)
  • Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    Price: $55.99
    More Info
    Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    x 
    							                        
    
                                                        
    High cornering forces can force the gear lube out of the center section  and down the axle tube leaving the ring and pinion high and dry!  This  billet aluminum seal has three O-rings that seal it to the axle tube and  two bonded, heavy duty, neoprene inner seals designed to compensate for  any amount of axle shaft runout. Keeps gear oil in the center section.   These seals will take up to an 1.5” diameter axle. 
    • Anodized billet aluminum
    • A must for cambered rear ends
    • For 9" Ford Grand National and Quick Change type housings
    • For up to 1.5” diameter axle
    • Keeps gear oil in the center section
    • Outside Diameter: 2.56"
    • Overall Length: 1.50"
    • This seal will fit our steel wide 5 axle
    • Choose housing tube I.D. size needed:
      • 2.500" - Gold
      • 2.562" - Blue
      • 2.625" - Red
      • 2.750" - Silver
    919-0951 Instructions (PDF)
  • Wheel Bearing Grease Packer
    Wheel Bearing Grease Packer
    (2 Ratings)
    Price: $6.99
    More Info
    Wheel Bearing Grease Packer
    x 
    							                        
    
                                                        Quickly packs bearings with new grease while forcing out old grease.