Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Schoenfeld Headers 165V High Velocity Street Stock Headers - Chevy

SAME DAY SHIPPING!

Specs
Material Type:
Steel
Sold in Quantity:
Pair
Finish:
Painted
Tube O.D.:
1.63
Port Height:
1.50
Port Width:
1.46
Flange Thickness:
.25
Flange Style:
Square Port
Collector Diameter :
3.00
Gasket(s) Included:
Yes
Hardware Included:
Yes
Drivers Side Dimension A:
6.25
Drivers Side Dimension B:
16.05
Drivers Side Dimension C:
31.25
Passenger Side Dimension A:
5.85
Passenger Side Dimension B:
16.80
Passenger Side Dimension C:
35.25
Collector Length:
7.25
MFG. Part #:
165V
Garage Sale:
No

Share by Email

From
To

Click image to enlarge

X

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

Races are won by the guy who gets off the corner the fastest. Torque is what gets your car moving, and the right header is crucial for generating maximum torque. These high-velocity headers are engineered to boost torque in small-block Chevy race engines, and are designed to fit 1970-1981 Camaro, Chevy II, 1975-1979 Nova, 1964-1977 Chevelle, and 1972-1977 Monte Carlo.

Conventional style headers for car with engines in stock location or engine set back.

Header Dimension Chart

Notes

Will NOT fit angle plug heads

Will NOT clear rear mounts.

Specs


Item Details

1-5/8" to 1-3/4", 1964-1977 Intermediate

You may also be interested in:

Schoenfeld High Velocity Street Stock Headers, 1-1/2 To 1-5/8 Inch
                        

Races are won by the guy who gets off the corner the fastest. Torque is what gets your car moving, and the right header is crucial for generating maximum torque. These high-velocity headers are engineered to boost torque in small-block Chevy race engines with standard port cylinder heads.

Fits Monte Carlo (1972-1987) and Malibu, Grand Prix, Cutlass, Regal (1978-1987) and Camaro (1970-1981).

  • Clears side and rear engine mounts (motor must be in stock location)
  • Fits straight or angle plug heads
  • Will not clear stock manual clutch linkage ball or air condition box
  • Must use short oil filter such as WIX 51069, AC PF24, or FRAM PH30

Header Dimension Chart

Thermo Tec 11001 Header Wrap, 1 Inch x 50 Ft, White Color
                        

Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

Please consider the Snap Strap Kit For V-8 and the Hi-Heat Coating when using this product.

Typical Small Block Chevy Headers Need:

  • (2)  704-11002/11022 Wraps
  • (1)  704-13101 Strap Kit
  • (2)  70412001 High Heat Coatings

Typical Big Block Chevy and 180 Degree Headers Need:

  • (2-3)  704-11002/11022 Wraps
  • (1)     704-13101 Strap Kit
  • (2-3)  704-12001 High Heat Coatings
Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, White Color
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Dynatech® Chevy Street Stock Headers, 1-3/4 Primary, 3-1/2 Collector
                        

Monte Carlo / Metric Header - 78-86 Street Stock

1.750" Primary Tubes w/ 3.50" Coll.

Header Dimension Chart

Dynatech® Chevy Street Stock Headers, 1-5/8 Primary, 3 Inch Collector
                        

Fits Following Models: Camaro ('70-'81), Malibu, Monte Carlo, Grand Prix, Cutlass & Buick Regal ('72-'87)

  • Fits in stock location
  • Can use solid side and rear mounts
  • For Standard Chevy or Crate Engine applications
  • Fits angle or straight plug heads
  • Gaskets, bolts and hardware included
  • Must use short oil filter
  • Will not clear stock manual clutch linkage ball

Header Dimension Chart

Dynatech® Chevy Street Stock Headers, 1-5/8 - 1-3/4 Primary, 3 Inch Collector
                        

Fits Following Models: Camaro ('70-'81), Malibu, Monte Carlo, Grand Prix, Cutlass & Buick Regal ('72-'87)

  • Fits in stock location
  • Can use solid side and rear mounts
  • For Standard Chevy or Crate Engine applications
  • Fits angle or straight plug heads
  • Gaskets, bolts and hardware included
  • Must use short oil filter
  • Will not clear stock manual clutch linkage ball

Header Dimension Chart