Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Small Block Ford V8 Balancer Bolt

SAME DAY SHIPPING! Order within the next 8 hours 23 minutes and receive same day shipping

Small Block Ford V8 Balancer Bolt
Small Block Ford V8 Balancer Bolt

Click image to enlarge

Speeday Motors Logo
X
Small Block Ford V8 Balancer Bolt

Details

Reviews

Q & A

What's in the Box

Harmonic balancer bolt and washer fit the Small Block Ford V8 302-351W and has a 12 point head.

  • 170,000 PSI strength
  • Thick, 1/4" washer

 

You may also be interested in:

Small Block Ford 302-351 4-Bolt Balancers
                        

This Small Block Ford balancer features billet steel forgings, a durable elastomer bond. The 50 oz. balance factor is common to 1981-95 302.

Has a 4-bolt pulley hub.  Has a anodized black finish.

Professional Products Harmonic Balancer, 28 Ounces, Small Block Ford
                        

These PowerForce series balancers from Professional Products are available in 28 oz. or 50 oz. balance. They both measure 6.4" in diameter, are 3" in total length, and are marked to 40 degrees at three locations. Plus, they feature both 3 and 4 bolt pulley holes, which allows the use of late model serpentine drive systems on early engines if desired. Counter weight is removable for zero balanced cranks. Fits most 260/289/302/351W/5.0L Ford engines.  6500 RPM max limit.

See Notes tab for spacer requirements.

28 oz. Balancer (S/B Ford V8 1963-80)

  • Matches O.D. and thickness of the stock early (1963-69) dampers
  • Counterbalance weight matches the stock 28 ounce inches
  • Overall balance specifications are held tighter than the original O.E. tolerances
  • Dual Bolt Pattern - both the "early" 3-bolt and the "late" 4-bolt patterns
  • Removeable Counterweight - if building a neutral balance engine simply remove the bolt-in counterweight on the back of the damper

50 oz. Balancer (S/B Ford V8 1981-95)

  • Made to the early short length of 3" - allows the use of a late 5.0L engine with a 50 oz. in. damper to be used in an early chassis where front clearance is at a minimum
  • To fit in late vehicles, use spacers to provide the correct front pulley alignment
  • Dual Bolt Pattern - both the "early" 3-bolt and the "late" 4-bolt patterns
  • Plastic insert shown in photos can be used to center 3-bolt pulleys with a female pilot, or it can be removed to accept 3-bolt pulleys with a male pilot
  • Very versatile and can be used on many different Ford engines

Harmonic Balancer Technical Notes (PDF)

910-15365 Instructions (PDF)