Small Block Ford Fabricated Aluminum Valve Covers
Click image to enlarge
Please NOTE the following about this product:
- This item is sold as a pair.
Q & A
What's in the Box
Fits 1962-1985 Small Block Ford 260-289-302-351W & 5.0L
- Overall Height: 3-1/2"
- Included Bolt Length: 4-1/2"
- These valve covers do not contain baffles
- Gaskets NOT included
You may also be interested in:
Fel-Pro Gaskets 1613 1962-86 S/B Ford 260-351W Valve Cover GasketsPrice: $15.99More Info
Weld or Bolt-On Fill CapMore Info
Billet Valve Cover O-Ring Oil FillMore Info
Push-In Valve Cover Breather Without ShieldMore Info
Grommets for Push-In Oil Breathers, 1-1/4 Inch O.D., 1 Inch I.D.More Info
Speedway Small Block Ford Valve Cover GasketsMore Info
Billet Style Aluminum Breathers Without PCV ValveMore Info
Valve Cover Oil Filler CapMore Info
Blue Stripe, 3/16" cork-rubber valve cover gaskets for 1962-1986 Ford, Mercury V8 260, 289, 302 (except "BOSS") and 351W V-8.
Billet aluminum cap and base. Weld or screw to your valve cover, oil tank or rear end. Knurled cap with O-ring seal.
- 1-1/4" inside diameter
- 1-1/4"-12 thread pitch
Note: If using this fill cap in a bolt-on manner, (3) #4 screws/bolts with a countersunk head are required (not included). Bolt hole size is 1/8".
This is a handy little item. Basically, it's a bolt-in breather opening for a valve cover that can be used to install a breather cap, an oil fill cap, or a breather with a PCV valve.
To install this item, you must make a 1-7/16" hole in the valve cover. You may want to purchase 91011033, our billet breather and/or 91011034, our billet PCV valve.
These washable, push-in pleated gauze valve cover breathers are available without a shield. The formed rubber nipple pushes into a 1.22" valve cover hole.
Our replacement 1-1/4" grommets are made of a black neoprene material for extended service life. Can be used as a plug, or a grommet for push-in style oil breather caps by trimming off the bottom.
Fits into a 1-1/4" valve cover hole.
Small Block Ford (SBF) valve cover gasket made with stainless steel frame sandwiched between durometer-tested neoprene rubber. Eliminates leakage caused by internal pressure fluctuations. Won't tear or collapse.
Reusuable. Package of two.
Speedway Illustration (GIF)
Polished aluminum breathers come with rubber grommets for 1.250" hole.
Universal, Billet Aluminum Screw-in Type for 1.3750" ID hole, Billet Aluminum Screw-in Type, Black Anodized, with O-ring seals