ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Help Center
Help Center
x
x
Help Center

sales@speedwaymotors.com

Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Small Block Chevy Fabricated Valve Covers w/ Breather Tubes

SAME DAY SHIPPING! Order within the next 10 hours 9 minutes and receive same day shipping

Free Shipping Free Shipping
Specs
Material Type:
Aluminum
Overall Height:
3.50
Overall Width:
5.13
Overall Length:
19.50
Sold in Quantity:
Pair
Finish:
Natural
Tube O.D.:
1.38
Baffled:
Yes
Garage Sale:
Yes
Notes
Designed to bolt down with 1/4"-20 x 3-1/2" socket head cap screws.
Small Block Chevy Fabricated Valve Covers w/ Breather Tubes

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

Not only are these valve covers lightweight, they look cool! Hand fabricated and TIG welded, these aluminum valve covers have baffled breather tubes in one cover for racing use. Use with 1-3/8" breathers. Includes hold down bolts. Gaskets not included.

  • Flange Thickness:  1/8"
  • Bolts: 1/4"-20 x 3-1/2"
  • Can be painted, polished, or left in bare aluminum finish.

Fits 1960-1986 Small Block Chevy 283-400 c.i. V8.

Specs


Item Details

S/B Chevy 1960-1986

Customer Reviews

Rated 5 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

28 Racer
Verified Purchaser
Alabama

Great Product For The Money

March 09, 2012
Great Value. Very good looking. Will buy another pair.
Pros:
  • Lightweight
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

1 questions : 1 answers

1 answers

are they tall valve covers and will they work with shaft mounted rockers

brad
new carlisle
December 31, 2010

are they tall valve covers and will they work with shaft mounted rockers

Answers

January 04, 2011
Eric
These would be classified as a “tall” valve cover. They measure 3.5” from the gasket surface to the inside (center) of the valve cover. They should clear shaft mounted rocker arms, however when using a valve cover like this I have had to do some clearancing on the billet gasket rail with some roller rocker arms (shaft or stud mounted).
Page 1 of 1

You may also be interested in:

1960-1986 Small Block Chevy Fabricated Valve Covers w/ Holes
(Part #91017129)
                        

Whether you're going for the hardcore race look or just trying to save weight, these fabricated aluminum valve covers are for you! Each cover comes with a single baffeled 1-1/4" hole for PCV or oil fill. Can be painted, polished, or left in bare aluminum finish.

Fits 1960-1986 Small Block Chevy 283-400 c.i. V8.

Grommets & hardware not included. Use a 1-1/4" grommet.

1960-1986 Small Block Chevy Fabricated Valve Covers
(Part #91017130)
                        

Whether you're going for the hardcore race look or just trying to save weight, these fabricated aluminum valve covers are for you! These fully welded sheet aluminum covers feature a 1/8" thick flange for a great seal. Can be painted, polished, or left in bare aluminum finish. Bolts and washers included for mounting with valve cover. Gaskets not included.

Fits 1960-1986 Small Block Chevy 283-400 c.i. V8.

No provisions for an oil breather. 

R2C Engine Breather Filter, 1-3/8 Inch
(Part #59210800)
                        

R2C premium breather filters are designed to offer racers the finest crankcase and tank breather technology available today. R2C's flange design improves oil return and significantly reduces the dripping caused by oil collected at the lower flange associated with competitors breather fllters.  R2C breather construction also ends the problems associated with cap failures. HD screens eliminate crushed breathers. R2C breathers are fully washable using biodegradable solvents.

Available in carbon fiber or red, blue and black anodized aluminum cap finishes.

 

Carbon Fiber breathers are clearance priced.

 

 

Valve Cover Shielded Breather, 1-3/8 Inch
(Part #465621513)
                        Valve cover breathers feature a clamp-on shielded design. Washable & reuseable.
  • Clamps to a 1-3/8" O.D. tube
  • Overall height of the breather and base is 3-1/8”
  • Overall diameter of breather without shield is 2-7/8”
  • Overall diameter of breather with shield is 3-1/4”
Valve Cover Breather Filter - 1 3/8 Inches
(Part #465621440)
                        

Valve Cover Breather Filter, 1 3/8"

Clamp-on style valve cover breathers. Washable.