Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Rubbn'Repair 60 X 4.5 Easy-to-Install Top Wing Protector

SAME DAY SHIPPING! Order within the next 5 hours 2 minutes and receive same day shipping

Specs
Overall Width:
4.50
Overall Length:
60.00
Sold in Quantity:
Each
Garage Sale:
No
Notes
Carbon fiber design.
Rubbn'Repair 60 X 4.5 Easy-to-Install Top Wing ProtectorRubbn'Repair 60 X 4.5 Easy-to-Install Top Wing Protector
Rubbn'Repair 60 X 4.5 Easy-to-Install Top Wing Protector

Click image to enlarge

Watch the video below to learn more about Rubbn'Repair Wing Caps, including the installation process.

Speeday Motors Logo
X
Rubbn'Repair 60 X 4.5 Easy-to-Install Top Wing Protector

Details

Reviews

Q & A

What's in the Box

Rubbn' Repair self adhesive wing caps have a carbon fiber look, but with a plastic price. Easy to cut and install. No riveting required.
  • No Rivets - Uses a high end adhesive to adhere the cap to your wings, which means there is no longer a need to put rivets in your expensive wings.
  • No Gaps - Unlike the "one size fits all wings" approach, Rubbn'Repair Wing Caps are moldable to your wing.  So, those annoying gaps along the top and bottom edges created by those preformed caps are a thing of the past.    
  • Removable - With a little prying effort, you can remove the caps with NO damage (or rivet holes) to your expensive wing.
  • Impact Resistant - Will not shatter or break and can handle direct rock hits with little or no damage. 

Application

  • Thickness:  65 mils (total) for the 3-ply version
  • Adhesion:  80 psi
  • Tensile Strength:  100 psi
  • Adhesive Liner:  Poly-coated kraft paper backing
  • Moldable Temperature:  194 °F (90 °C)
  • Maximum Operating Temperature:  270 °F (132 °C)
  • Service/Operating Temperature Range:  -50 °F (-45 °C) to 270 °F (132 °C)
  • Elasticity:  Up to 80% elongation in elastic state
  • Tear Resistance:  Up to 26,000 psi

Specs

  • Thickness:  65 mils (total) for the 3-ply version
  • Adhesion:  80 psi
  • Tensile Strength:  100 psi
  • Adhesive Liner:  Poly-coated kraft paper backing
  • Moldable Temperature:  194 °F (90 °C)
  • Maximum Operating Temperature:  270 °F (132 °C)
  • Service/Operating Temperature Range:  -50 °F (-45 °C) to 270 °F (132 °C)
  • Elasticity:  Up to 80% elongation in elastic state
  • Tear Resistance:  Up to 26,000 psi

You may also be interested in:

Carbon Fiber Leading Edge Protector, Top and Nose
                        

Protect the front of your top and nose wings with these carbon fiber caps. They’re durable, easy to install with pop rivets, and maintain proper aerodynamics.

  • Used on sprint cars where you need to keep the leading edge of your wing clean 
  • Made of strong carbon fiber
  • Attach easily with a few rivets or even silicone
  • 60" x 6" top wing
  • 36" x 3-1/2" nose wing
Carbon Fiber Leading Edge Protector, Top Only
                        

Protect the front of your top wing with these carbon fiber caps. They’re durable, easy to install with pop rivets, and maintain proper aerodynamics.

  • Used on sprint cars where you need to keep the leading edge of your wing clean 
  • Made of strong carbon fiber
  • Attach easily with a few rivets or even silicone
  • Measures 60" x 6"
High Impact Plastic Top Wing Cap
                        

You may not have an "Outlaw" budget, but you still need to protect your sprint cars top wing. These high-impact plastic caps will keep rocks and dirt from doing damage, and are a fraction of the cost of carbon fiber.

  • Used on sprint cars where you need to keep the leading edge of your wing clean and protected
  • Low-cost wing protection
  • Tough, high-impact plastic
  • Black color
  • Pop rivet to your wing to maintain the wing's contour for proper aerodynamics
  • Tough enough to reuse on many wings
Rubbn'Repair 36 X 3.5 BLACK No Rivet Nose Wing Cap
                        Self adhesive black carbon fiber look that's quick and easy to apply.  Just heat to make soft and moldable then fit to wing.  Material hardens inot a strong, lightweight protective cap that holds the new shape.  Withstands the hardest racing conditions and removes without damaging wing.
  • No Rivets - Uses a high end adhesive to adhere the cap to your wings, which means there is no longer a need to put rivets in your expensive wings.
  • No Gaps - Unlike the "one size fits all wings" approach, Rubbn'Repair Wing Caps are moldable to your wing.  So, those annoying gaps along the top and bottom edges created by those preformed caps are a thing of the past.    
  • Removable - With a little prying effort, you can remove the caps with NO damage (or rivet holes) to your expensive wing.
  • Impact Resistant - Will not shatter or break and can handle direct rock hits with little or no damage.