Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Rubber Brake Line Hose Set for 10mm-1.5 Calipers

SAME DAY SHIPPING! Order within the next 3 hours 6 minutes and receive same day shipping

Specs
Sold in Quantity:
Pair
Material Type:
Rubber
Color:
Black
Thread Pitch:
10mm-1.5
Garage Sale:
No
Overall Length:
15.00
Outside Diameter:
.40
Notes
Banjo bolts and crush washers are not included.
Rubber Brake Line Hose Set for 10mm-1.5 Calipers
Rubber Brake Line Hose Set for 10mm-1.5 Calipers
Product Video
Rubber Brake Line Hose Set for 10mm-1.5 Calipers

Click image to enlarge

Watch the video below to learn more about the differences in brake lines, flare types and fittings you may want to consider before plumbing away on your current chassis project.

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

These 15" front brake hoses are designed for 1955-1974 GM front disc brake conversions using stock-style 1969-1988 GM single-piston calipers.

Note: Hose banjo bolts sold separately.

Item Details

1955-1974 GM

Customer Reviews

Rated 3 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
0
4 Stars
0
3 Stars
1
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

zippo
Verified Purchaser

picture was different than product

August 31, 2014
I wanted a rectangular banjo end as 'stock' picture depicted but got round ends. Speedway cheerfully accepted my return after discussing. Went looking elsewhere and found a Dorman product H36952 that worked for me from 85 GMC Van, thereabouts. I had to carefully remove the support bracket bent around the hose since these are model specific hoses . This can be done easily with vice grips but you need to be careful and patient.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

0 questions : 0 answers

No questions have been asked.

You may also be interested in:

Speed Bleeder Bleed Screws, 3/8-24
(Part #6173959)
                        

The Speed Bleeder is a direct replacement for the bleeder assembly in your caliper. This makes brake bleeding truly a one-man operation. Simply "crack" the bleeder loose, pump the brakes, then close the bleeder. 

Sold in pairs.

Read more about bleeding brakes in our tech article, How To Bleed Your Brake Lines. 

Hawk HB103H.590 Performance 1969-1977 GM HPS Brake Pads
(Part #919D052)
                        

Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”

Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Motorsports severe-duty friction technology.

  • Higher coefficient of friction over stock brake pads
  • Provides 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads
  • Less fade means a highly durable brake pad with less brake dust

Upgrade your 1969-77 GM Midsize braking system with these premium pads. Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

Brake Pad Brand Guide (Link) 

Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

 

Item Details

High friction/torque hot or cold, gentle on rotors, low noise
DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
(Part #6178561)
                        

DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

  • Stainless steel braid over Teflon® hose
  • Reduces volumetric expansion of brake lines
  • Reduces brake fade
  • Less susceptible to debris than rubber line

Item Details

1978-Up GM with 10mm-1.5 caliper threads
GM Disc/Drum Proportioning Valve for 1/2-20, 9/16-18 Outlets
(Part #91031351)
                        

These proportioning valves are similar to what GM used on many cars in the 70s. They are non-adjustable and may require an adjustable valve in the rear brakes (if needed). Block incorporates metering (for front brakes) and proportioning (for rear brakes) into one unit. For use with front disc, rear drum brake systems.

Includes hard lines to connect to a master cylinder with 1/2"-20 and 9/16"-18 outlets.

GM Proportioning Valve Plumbing Instructions (PDF)

Item Details

For M/C with 1/2"-20 and 9/16"-18 outlets.
Rubber Front Brake Lines & Fitting Kit, 7/16-20
(Part #6178563)
                        

Stop guessing which banjo fittings go with which brake lines. With this kit you get two rubber front brake lines, two banjo bolts with seals, and a pair of easy-to-install brake line tabs and clips.

  • 18" lines including fittings
  • 3/8"-24 IFF and 7/16"-20

Lines are 18" in length. Features 3/8"-24 IFF at the chassis fitting to accept 3/16" brake line.

Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
(Part #6178559)
                        These steel braided front brake lines are 19" overall length. They are for common 1978-1988 GM metric style calipers. Stainless steel braid significantly reduces hose expansion under pressure, which results in a firmer pedal feel versus rubber hoses.
                    
Garage Sale - 16" S.S. Braided Brake Line
(Part #6178559-1)
                        

This item is garage sale priced because it's been discontinued.

 

**No Warranty, No Returns On Garage Sale Items**

 

19" long lines with a 10mm x 1.5 thread.  Includes banjo bolts and crush washers.

Wilwood 220-12104 14 Inch Flexline Kit, 3/8-24 IF to 10mm Banjo
(Part #83522012104)
                        Wilwood's stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses.
                    
Wilwood 220-12105 18 Inch Flexline Kit, 3/8-24 IF to 10mm Banjo
(Part #83522012105)
                        Wilwood's stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses.
                    
Wilwood 220-12106 22 Inch Flexline Kit, 3/8-24 IF to 10mm Banjo
(Part #83522012106)
                        Wilwood's stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses.
                    
Removable Brake Tab for Rubber Hose
(Part #91031311)
                        

This brake line tab is designed to work only with our 6178568 and 6178569 rubber brake hoses. The I.D. of the tab has a unique shape, similar to that of an OEM brake tab.

Fits many OEM hoses for 1969-1988 GM calipers. Sold as a pair and includes two retainer clips.

Steel 10MM x 1.50 Inch Brake Banjo Bolt
(Part #6172925)
                        

These brake banjo bolts are designed to fit your OEM brake lines and calipers. They are manufactured from quality materials and then plated to resist corrosion. These brake banjo bolts give you leak-free performance and consistent fluid pressure delivered to your brake caliper.

Brake Banjo Bolt

  • Steel
  • 10MM x 1.50 Inch
  • For use with banjo fittings and crush washers.
3/8 Inch or 10mm Crush Washers, 5/Pk
(Part #6173642)
                        Crush washers come 5 in a package.

Item Details

Aluminum