ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

RideTech 02011036 Shockwave 9000 Air Ride Rear Kit-14.5 In Ride Height

SAME DAY SHIPPING! Order within the next 7 hours 29 minutes and receive same day shipping

Free Shipping Free Shipping
Specs
Sold in Quantity:
Kit
Overall Diameter:
5.05
Extended Length:
16.56
Compressed Length:
11.56
Mounted Length:
14.50
Bushing Length:
1.25
Hardware Included:
Yes
Stroke:
5.00
Notes
Includes solenoid, gauge, mounting hardware, tubing, and bushings. Two different ID sizes of bushings (.50" and .62")
RideTech 02011036 Shockwave 9000 Air Ride Rear Kit-14.5 In Ride Height
RideTech 02011036 Shockwave 9000 Air Ride Rear Kit-14.5 In Ride Height
RideTech 02011036 Shockwave 9000 Air Ride Rear Kit-14.5 In Ride Height

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a kit.

Details

Reviews

Q & A

What's in the Box

The AirRide Technologies Shockwave 9000 will give you the ride you've been looking for. The 9000 series is 5" in diameter and can handle 1200 lbs. @ 100 psi. These work well with a rear axle weight of 1500-2400 lbs.

Kit includes:

  • Two Shockwaves
  • Air compressor
  • Control panel
  • Mounting hardware
  • 11.56" eye to eye compressed
  • 14.50" eye to eye at ride height
  • 16.56" eye to eye fully extended
  • 5" stroke

Customer Reviews

Rated 5 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Lane32
Fresno, CA, USA

best ride out there with this product.

September 30, 2013
I put these on my 54 Chevy and the ride is insane best investment I've made.
Pros:
  • the ride
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

1 questions : 1 answers

1 answers

do you discard the rear spring when you use the airbag system ?

tator
Bennett, CO 80102, USA
April 11, 2013

do you discard the rear spring when you use the airbag system ?

Answers

April 12, 2013
Jason
If currently running a four bar, wishbone, or radius rod suspension with a cross leaf spring the spring could be removed but you would need to make sure you have a panhard bar or watts link to keep the rear end in the proper location. If running parallel leaf springs the simplest is to retain the main leaf for front to rear alignment but if you desire to completely eliminate the springs then a four bar or similar front to rear configuration along with a panhard bar or watts link would be required.
Page 1 of 1

You may also be interested in:

Watts Link
(Part #91649023)
                        Gives you better control than a Panhard Bar. Perfect for coil spring or coil-over rear suspension. For chassis widths of 46" or less. Threaded approximately 2 “ on each end. 

Kit includes:

  • mounting brackets
  • rod (19" threaded for 1/2" rod ends)
  • jam nuts
  • all required hardware

Watts Link Illustration

Universal Rear Sway Bar Kit
(Part #91649019)
                        

Universal rear sway bar fits frame up to 45" wide, which makes it ideal for many 1928-1948 street rod applications. Both the 1-1/4" diameter shaft and the 2" O.D. weld-in frame tube can be shortened for narrower frames. The billet aluminum arms are not splined - they are held on by drilling the shaft and inserting a bolt all the way through the end of the shaft.

Includes bushings, 3/8" adjustable rod ends and all hardware. Welding required.

RideTech 02011034 Shockwave 7000 Series Air Ride Rear Kit, 14-1/2 Inch
(Part #9107000)
                        

The RideTech Shockwaves will give you the ride you've been looking for. The 7000 series is 4" in diameter and has a load capacity of 780 lbs. @ 100 psi air pressure. These work well with a rear axle weight of 1500 lbs. or less. No air tank required.

Kit includes:

  • Two Shockwaves  (SKW7000)
  • Air compressor  (ARC1500)
  • Control panel  (CON1500)
  • Mounting hardware, lines and fittings 
  • 11.56" eye to eye compressed
  • 14.50" eye to eye at ride height
  • 16.56" eye to eye fully extended
  • 5" stroke
Garage Sale - RideTech Shockwave 9000 Air Ride Rear Kit, 13 Inch Ride Height
(Part #9109001)
                        

The AirRide Technologies Shockwave 9000 will give you the ride you've been looking for. The 9000 series is 5" in diameter and can handle 1200 lbs. @ 100 psi. These work well with a rear axle weight of 1500-2400 lbs.

Kit includes:

  • Two Shockwaves
  • Air compressor
  • Control panel
  • Mounting hardware
  • 10.66" eye to eye compressed
  • 13.00" eye to eye at ride height
  • 14.76" eye to eye fully extended
  • 4.1" stroke

 

Clearance!

 

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

Bolt-On Panhard Bar for Ford 8 Inch, 9 Inch Axle
(Part #91049800)
                        

This Mr. Roadstar Rear Panhard Bar is used to control the side-to-side movement of the rear axle. This is necessary when using a parallel 4-bar or hairpin radius rod rear suspension. The bar is threaded on one end for length adjustment and is welded on opposite end. This will require one end to be unbolted to allow for the length adjustment. Available in plain finish or polished Stainless Steel.

Kit includes:

  • Axle Bracket (for 8" or 9" Ford)
  • Bar with Urethane bushed Stainless adjuster - 20" eye-to-eye
  • Frame Bracket

910-49800 Instructions (PDF)