Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

RideTech 02011034 Shockwave 7000 Series Air Ride Rear Kit, 14-1/2 Inch

SAME DAY SHIPPING! Most orders ship within 24 hours.

RideTech 02011034 Shockwave 7000 Series Air Ride Rear Kit, 14-1/2 InchRideTech 02011034 Shockwave 7000 Series Air Ride Rear Kit, 14-1/2 Inch
RideTech 02011034 Shockwave 7000 Series Air Ride Rear Kit, 14-1/2 Inch

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a kit.

Details

Reviews

Q & A

What's in the Box

The RideTech Shockwaves will give you the ride you've been looking for. The 7000 series is 4" in diameter and has a load capacity of 780 lbs. @ 100 psi air pressure. These work well with a rear axle weight of 1500 lbs. or less. No air tank required.

Kit includes:

  • Two Shockwaves  (SKW7000)
  • Air compressor  (ARC1500)
  • Control panel  (CON1500)
  • Mounting hardware, lines and fittings 
  • 11.56" eye to eye compressed
  • 14.50" eye to eye at ride height
  • 16.56" eye to eye fully extended
  • 5" stroke

Item Details

14-1/2" ride height

You may also be interested in:

Panhard Bar Rear Weld-on Kits
(Part #91649022)
                        

Use on almost any street rod. Required for coil spring and coil-over rear suspensions. Complete kit includes rod, brackets and 5/8" hardware. Ready to install. 25.5" long.

916-49022 Instructions (PDF)

Watts Link
(Part #91649023)
                        Gives you better control than a Panhard Bar. Perfect for coil spring or coil-over rear suspension. For chassis widths of 46" or less. Threaded approximately 2 “ on each end. 

Kit includes:

  • mounting brackets
  • rod (19" threaded for 1/2" rod ends)
  • jam nuts
  • all required hardware

Watts Link Illustration

Universal Rear Sway Bar Kit
(Part #91649019)
                        

Universal rear sway bar fits frame up to 45" wide, which makes it ideal for many 1928-1948 street rod applications. Both the 1-1/4" diameter shaft and the 2" O.D. weld-in frame tube can be shortened for narrower frames. The billet aluminum arms are not splined - they are held on by drilling the shaft and inserting a bolt all the way through the end of the shaft.

Includes bushings, 3/8" adjustable rod ends and all hardware. Welding required.

RideTech 02011036 Shockwave 9000 Air Ride Rear Kit-14.5 In Ride Height
(Part #9109000)
                        

The AirRide Technologies Shockwave 9000 will give you the ride you've been looking for. The 9000 series is 5" in diameter and can handle 1200 lbs. @ 100 psi. These work well with a rear axle weight of 1500-2400 lbs.

Kit includes:

  • Two Shockwaves
  • Air compressor
  • Control panel
  • Mounting hardware
  • 11.56" eye to eye compressed
  • 14.50" eye to eye at ride height
  • 16.56" eye to eye fully extended
  • 5" stroke
Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Plain Steel
(Part #91649055)
                        

Features heavy wall 21-1/2" rods with plain steel brackets. Exclusive sandwich-style brackets give greater bar support and incorporate a multi-position lower coil-over mount. 

Complete kit includes: mild steel rods, steel brackets, bushed rod ends, and hardware. Lower coil-over shock mount stud not included. The nuts & bolts supplied in this kit are NOT polished or plated.

  • Rod length is 21-1/2"
  • Center-to-center of 4-bar eyelets is 5.5"
  • Bracket width is 1.39"

This kit comes in two varieties:

  • TA - to fit narrow frames such as Model T or Model A
  • 3234 - to fit wider frames such as 1932-1934 Ford

Note:  Four bar rear suspension kits require the use of a side to side control such as a panhard bar or a watts link component.

916-49055 Instructions (PDF)

RideTech Shockwave 7000 Series Air Ride Rear Kit, 13 Inch Ride Height
(Part #9107001)
                        

The RideTech Shockwaves will give you the ride you've been looking for. The 7000 series is 4" in diameter and has a load capacity of 780 lbs. @ 100 psi air pressure. These work well with a rear axle weight of 1500 lbs. or less. No air tank required.

Kit includes:

  • Two Shockwaves  (SKW7000)
  • Air compressor  (ARC1500)
  • Control panel  (CON1500)
  • Mounting hardware, lines and fittings
  • 10.66" eye to eye compressed
  • 13.00" eye to eye at ride height
  • 14.76" eye to eye fully extended
  • 4.1" stroke