RideTech 30154000 Air Ride Suspension RidePro 4-Wheel Compressor Kit
Click image to enlarge
Q & A
What's in the Box
Air Ride Technologies' classic, standard, non-electronic RidePRO systems use the highest quality valve bodies, compressors, and components to deliver dependable and repeatable manual control. Manual controls provide the ability to inflate or deflate system. With the exception of our ShockWave kits, our air ride conversion kits DO NOT include a compressor, controls, etc.
- Control panel
- Electronic solenoids mount anywhere
- 4-way independent manual control system with RidePro electric valves
Tank Dimensions (GIF)
RidePro manual-controller systems are the right choice for bare bones installs and folks looking to for the most inexpensive way to run air suspension system.
Item DetailsTank, compressor, control panel, air lines, & solenoids
You may also be interested in:
RideTech 30141001 Standard Air Ride Suspension 4 Wheel Compressor KitMore Info
RideTech 30334000 Air Ride Suspension Digital Compressor SystemPrice: $1,499.99More Info
AccuAir AA-ELS4-RSW E-Level Air Suspension Controller w/Rocker SwitchPrice: $794.99More Info
AccuAir AA-VU2 VU2 2-Corner Air Suspension Solenoid Valve UnitPrice: $249.99More Info
AccuAir AA-ALUMTANK3-RAW 3-Gallon Aluminum Air Suspension Tank, RawPrice: $94.99More Info
Viair 45040 Single Air Compressor Kit, 450C$314.21Price: $219.99More Info
AVS GAU-200AVS2 Dual Needle Air Suspension Gauge, 0-200 psiPrice: $39.99More Info
AVS GAU-200AVS1 Single Needle Air Suspension Gauge, 0-200 psiPrice: $24.99More Info
AVS AVS-VAL38 250 PSI 3/8 Inch Air Intake Valve w/Mounting BracketPrice: $44.99More Info
Finish your air spring suspension with a complete compressor system from AirRide Technologies. Air Ride Technologies' classic, standard, non-electronic RidePRO systems use the highest quality valve bodies, compressors, and components to deliver dependable and repeatable manual control. Manual controls provide the ability to inflate or deflate system.
With the exception of our ShockWave kits, our air ride conversion kits DO NOT include a compressor, controls, etc. These manual-controlled systems are the right choice for bare bones installs and folks looking to for the most inexpensive way to run air suspension system.
- Tank: 21" wide, circumference of 19 3/4", contains mounting centers which are 13" apart and 2 gallon capacity
- Dual paddle control (front/rear)
- 60' air line with fittings
- Rise time: 12-15 seconds
All Compressor Systems include:
- Air tank
- Control panel
- Air line and fittings
Finish your air spring suspension with the RidePro e2 Compressor Control System from Air Ride Technologies. High tech electronic control allows the user to program three automatic height presets. This system uses air pressure sensors to control ride height presets. Digitally controlled solenoids with three presets allows you to have, for example, an over the road setting, a fairgrounds cruise setting and a parked setting.
RidePro e2 Systems feature:
- 3 gallon tank
- 4-way RidePro e2 compressor
- 4-way RidePro solenoids
- RidePro e controller
- Wiring harness, airlines and fittings
- Rise Time: 3-5 seconds
- Controls all four air springs independently
For its accuracy, reliability, and ease-of-use, this AccuAir e-level controller with rocker switch has become an industry favorite. This e-level controller offers the ability to program and save 3 different riding heights. This is possible due to the TruPosition technology that saves your positions by the touch of a button and wiill maintain vehicle height while parked or driving. No matter the road conditions or the number of passengers your vehicle height will remain the same. This automatic intelligence won't be noticed by the driver and is sure to improve the ride quality and handling characteristic for any vehicle with Air Suspension. Each system calibrates to the vehicle upon installation and then learns how your Air Suspension behaves over time. This flexibility allows the e-Level controller to be used on any vehicle and requires no user tuning.
- 3 programmable heights
- Adjusts as needed while driving or while in park
- Vehicle height stays constant no matter road conditions or passenger number
- Rocker switch included
The AccuAir VU4 4-Corner Valve Unit is engineered to provide the cleanest installation and most reliable operation on the market. This electronic solenoid valve unit can inflate or deflates up to 4 individual Air Springs and has built-in push-to-connect 3/8” D.O.T. approved air fittings for all of its plumbing connections. The robust internal solenoid valve architecture maximizes flow rates, provides bubble-tight sealing, and guarantees operation up to 200 psi for millions of cycles. All of this technology is housed in a unique enclosure design which routes each of the solenoid wires to a single weatherproof connector, eliminating typically loose wires. This not only improves the appearance, but it also guarantees proper operation for every installation. With an overall size of only 3.08"x 2.75"x 2.75" and the ability to survive harsh under vehicle environments, this product is ideal for any application with Air Suspension.
- 3/8" Press-fit D.o.t. fittings eliminate pipe threads for leak free operation
- 5.28" length
- 2.75" width
- 2.75" height
These AccuAir 3 Gallon Aluminum air suspension tanks are lightweight and corrosion resistant. They are designed for use with eXo Mount systems and high quality T.I.G. welds guarantee 100% sealing and a beautiful appearance. These tanks feature two built-in mounting bosses along the bottom of the tank and seamless construction allows eXo mount clamping systems to fit around the tank at any location.
- Aluminum construction
- Raw finish
- 3 gallon capacity
- 100% T.I.G. welded
- Seamless construction
- Two built in mounting bosses
- 1/4" NPT drain port for occasional moisture draining
Tank Data Sheet (PDF)
Viair 450C air suspension single compressor kit is a great all in one compressor kit. This kit includes check valve, mounting hardware, and a stainless steel braided leader hose. This kit also includes vibration isolators, air line for remote mount air filter, 2 replacement air filter elements, and remote mount air filter assembly.
- 12 volt
- Permanent Magnetic Motor
- 100% duty cycle @ 100 psi
- 150 psi max working pressure
- Compatible with up to 5 gal tanks
- 23 AMP max AMP draw
- 10.6" length
- 4" width
- 6.87" height
- 450C Compressor
- Air Filter Assembly
- Remote Mount Brackets
- Remote Mount Fittings
- (2) Spare Air Filter Elements
- Leader Hose Clips
- Air Line Clips with Included Hardware
- Nuts, Bolts, Washers and Lock Washers
- Stainless Steel Braided Leader Hoses with Inline Check Valve
- Heavy Duty Pressure Switch (110 PSI on, 145 PSI off)
- Air Line (For Remote Mount Filter Installation)
- 2.5 Gallon Air Tank:
- 0 to 105 PSI - 1 min. 55 sec.
- 85 to 105 PSI - 28 sec.
- 0 to 145 PSI - 3 min. 2 sec.
- 110 to 145 PSI - 59 sec.
- 5 Gallon Air Tank:
- 0 to 105 PSI - 4 min. 20 sec.
- 85 to 105 PSI - 58 sec.
- 0 to 145 PSI - 6 min. 40 sec.
- 110 to 145 PSI - 2 min. 11 sec.
45040 Manual (PDF)
45040 Dimensions (PDF)
45040 Wiring Diagram (PDF)
AVS GAU-200AVS2 Dual Needle Silver Air Gauge is one of the best on the market today. It features a silver gauge face with black lettering. Gauge sweep is full sweep and ranges from 0-200 psi!
- Silver bezel finish
- Full sweep gauge
- Gauge range 0-200 psi
- Black letter color
- 1/8" NPT male threads
AVS Silver Face Single Needle Gauge is one of the best on the market. It features silver gauge face color and black lettering. Full sweep gauge range 0-200 psi.
- Silver gauge face
- Black Lettering
- Dual Needle
- Dome shaped glass
- 2.20 inch diameter
- Full sweep gauge range
- 0-200 psi
- 1/8" NPT threads
AVS offers these great air intake valves with mounting brackets for your air suspension systems. They feature a pressure range of 250 PSI with a thread pitch of 3/8 inch NPT. Mounting brackets included.
- 0-250 PSI pressure range
- 3/8" NPT threaded ports
- 15mm orifice
- Suitable for air/water/oil
- 12 VDC explosion-proof coil
- Flow rate: Cv = 4.50
- Working temperature: 23° - 176° F
- Included LED indicator on solenoid for trouble shooting and diagnostics
- Sold each
- Mounting brackets included