Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

RideTech 30334000 Air Ride Suspension Digital Compressor System

SAME DAY SHIPPING! Order within the next 9 hours 52 minutes and receive same day shipping

RideTech 30334000 Air Ride Suspension Digital Compressor System

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Finish your air spring suspension with the RidePro e2 Compressor Control System from Air Ride Technologies. High tech electronic control allows the user to program three automatic height presets. This system uses air pressure sensors to control ride height presets. Digitally controlled solenoids with three presets allows you to have, for example, an over the road setting, a fairgrounds cruise setting and a parked setting.

RidePro e2 Systems feature:

  • 3 gallon tank
  • 4-way RidePro e2 compressor
  • 4-way RidePro solenoids
  • RidePro e controller
  • Wiring harness, airlines and fittings
  • Rise Time: 3-5 seconds
  • Controls all four air springs independently

Customer Reviews

This product has no reviews.

Product Q&A

1 questions : 1 answers

1 answers

What size are the air lines?

Dangilder
February 04, 2014

What size are the air lines?

Answers

February 04, 2014
EricM
This system includes 1/4" air lines.
Page 1 of 1

You may also be interested in:

Bolt-On Panhard Bar for Ford 8 Inch, 9 Inch Axle
(Part #91049800)
                        

This Mr. Roadstar Rear Panhard Bar is used to control the side-to-side movement of the rear axle. This is necessary when using a parallel 4-bar or hairpin radius rod rear suspension. The bar is threaded on one end for length adjustment and is welded on opposite end. This will require one end to be unbolted to allow for the length adjustment. Available in plain finish or polished Stainless Steel.

Kit includes:

  • Axle Bracket (for 8" or 9" Ford)
  • Bar with Urethane bushed Stainless adjuster - 20" eye-to-eye
  • Frame Bracket

910-49800 Instructions (PDF)

RideTech 30141001 Standard Air Ride Suspension 4 Wheel Compressor Kit
(Part #9101001)
                        

Finish your air spring suspension with a complete compressor system from AirRide Technologies. Air Ride Technologies' classic, standard, non-electronic RidePRO systems use the highest quality valve bodies, compressors, and components to deliver dependable and repeatable manual control. Manual controls provide the ability to inflate or deflate system. 

With the exception of our ShockWave kits, our air ride conversion kits DO NOT include a compressor, controls, etc. These manual-controlled systems are the right choice for bare bones installs and folks looking to for the most inexpensive way to run air suspension system.

  • Tank: 21" wide, circumference of 19 3/4", contains mounting centers which are 13" apart and 2 gallon capacity
  • Dual paddle control (front/rear)
  • 60' air line with fittings
  • Rise time: 12-15 seconds

All Compressor Systems include:

  • Air tank
  • Compressor
  • Control panel
  • Air line and fittings
RideTech 30154000 Air Ride Suspension RidePro 4-Wheel Compressor Kit
(Part #9104000)
                        

Air Ride Technologies' classic, standard, non-electronic RidePRO systems use the highest quality valve bodies, compressors, and components to deliver dependable and repeatable manual control. Manual controls provide the ability to inflate or deflate system. With the exception of our ShockWave kits, our air ride conversion kits DO NOT include a compressor, controls, etc.

Kit includes: 

  • Tank
  • Compressor
  • Control panel
  • Electronic solenoids mount anywhere
  • 4-way independent manual control system with RidePro electric valves

Tank Dimensions (GIF)

AccuAir AA-AMP2-TPAD-EN-5C E-Level Stage 2 Air Suspension Management Kit
(Part #9109900)
                        

This AccuAir E-Level Air Management Kit with Touchpad includes everything you need to control the air suspension on your ride. This kit includes top of the line e-level controller with touchpad, two 400c compressors with a 5 gallon tank, and it features 3 programmable ride heights. This kit also features 3/8" D.O.T approved plumbing kit and 4 corner valve unit. This is a great all in one package!

  • E-level controller with touchpad
  • 400c compressors (2)
  • 5 gallon tank
  • 3 programmable ride heights
  • 3/8" D.o.t approved plumbing kit
  • VU4 4-Corner Solenoid Valve Unit provides responsive and reliable air spring control in a single compact, pre-wired, leak-free package
  • Includes e-Level 4-Corner Electronic Leveling System Features:
    • 3 Programmable Heights Lowered / Ride Height / Raised
    • RideMonitor Mode adjusts as needed while driving or parked
    • TruPosition Height Sensors provide accurate leveling regardless of load
    • Ride-Height-on-Start gets you ready to drive when you turn the key
    • Anti "Cross-loading" Height Management gives balanced spring weights
  • Automatically Calibrates to any Air Suspension System on any vehicle, (NO user programming required)
  • Straight to Height adjustments avoid valve "pulsing" and gets you ready to drive immediately
  • Active Learning maximizes leveling performance after every adjustment
  • Manages Air Compressors for faster recovery
  • Monitors Vehicle Voltage and automatically turns compressor(s) OFF at 10.5 volts to prevent a dead battery
  • 100% Weather-Proof for under vehicle mounting
  • Plug-n-Play wiring harnesses for ease of installation
  • Each System is 100% Factory Tested

Each Stage 2 Kit Includes:

  • (1) e-Level Electronic Leveling System w/ TouchPad Interface
  • (1) VU4 4-Corner Solenoid Valve Unit
  • (2) Viair 400C Compressors
  • (1) 5-Gallon Anodized Aluminum Air Tank
  • (1) Anodized Aluminum Serviceable Air Filter w/ 3/8" Straight Fittings
  • (50') 3/8" D.O.T. Approved Air Line
  • (4) 3/8" - 1/4" NPT D.O.T. Approved Swivel Elbows for Air Springs
  • (1) 3/8" - 1/4" NPT D.O.T. Approved Straight Fitting for Tank
  • (1) 6 ml tube of Loctite 565 Thread Sealant
  • (1) Stainless Steel Mounting Hardware Package
  • (1) Illustrated Installation & Operation Manuals

Installation Manual (PDF) 

Operation Manual (PDF) 

Additional Information (PDF) 

Slam Specialties SS-5 5-1/2 Inch Diameter Suspension Air Spring, 1/2 Inch Port
(Part #9109018)
                        

Slam Specialties has done it again! This SS-5 Air Spring is a remarkable 40% lighter than the RE series and features integrated bump stops for strength and durability. Air spring collapses to 2.7 inches and extends to 8.625 inches. SS-5 air spring has a 250psi rating, and has an additional 1 inch more stroke than the RE series! Slam Specialties air springs are the perfect addition to your custom suspension, for a quality ride you will be sure to enjoy.

  • 250psi Pressure rating
  • 5.50" diameter
  • Collapses to 2.7"
  • Extends to 8.625"
  • Integrated Bump Stops for Strength and Durability
  • 6061-T6 Custom CNC aluminum inserts and port meet and exceed thread strength of the RE series
  • (1) 1/2" NPT Port
  • (2) 3/8"-16 Mounting Holes in the Top Plate
  • (3) 3/8"-16 Mounting Holes in the Bottom Plate
  • Force to Collapse to 2.7": 50 lbs
Slam Specialties SS-6 6 Inch Diameter Suspension Air Spring, 1/2 Inch Port
(Part #9109019)
                        
Slam Specialties has done it again! This SS-6 Air Spring is a remarkable 40% lighter than the RE series and features integrated bump stops for strength and durability. Air spring collapses to 2.7 inches and extends to 11 inches. Non-ballooning design. Ideal for mini-trucks and lighter weight vehicles. SS-6 air spring has a 250psi rating, and has an additional 1 inch more stroke than the RE series! Slam Specialties air springs are the perfect addition to your custom suspension, for a quality ride you will be sure to enjoy.
  • 250psi Pressure rating
  • 6" diameter
  • Collapses to 2.7"
  • Extends to 11"
  • Integrated Bump Stops for Strength and Durability
  • Non-Ballooning Design
  • 6061-T6 Custom CNC aluminum inserts and port meet and exceed thread strength of the RE series
  • (1) 1/2" NPT Port
  • (2) 3/8"-16 Mounting Holes in the Top Plate
  • (3) 3/8"-16 Mounting Holes in the Bottom Plate
  • Force to Collapse to 2.7": 50 lbs
  • Ideal for mini-trucks and lighter weight vehicles.
Slam Specialties SS-7 7 Inch Diameter Suspension Air Spring, 1/2 Inch Port
(Part #9109020)
                        

Slam Specialties has done it again! This SS-7 Air Spring is a remarkable 40% lighter than the RE series and features integrated bump stops for strength and durability. Air spring collapses to 2.7 inches and extends to 12 inches. Non-ballooning design. Ideal for Full size truck front suspension, and link mounted bags for rear suspension. SS-7 air spring has a 250psi rating, and has an additional 1 inch more stroke than the RE series! Slam Specialties air springs are the perfect addition to your custom suspension, for a quality ride you will be sure to enjoy.

  • 250psi Pressure rating
  • 7" diameter
  • Collapses to 2.7"
  • Extends to 12"
  • Integrated Bump Stops for Strength and Durability
  • Non-Ballooning Design
  • 6061-T6 Custom CNC aluminum inserts and port meet and exceed thread strength of the RE series
  • (1) 1/2" NPT Port
  • (2) 3/8"-16 Mounting Holes in the Top Plate
  • (3) 3/8"-16 Mounting Holes in the Bottom Plate
  • Force to Collapse to 2.7": 50 lbs
  • Ideal for Full size truck front suspension, and link mounted bags for rear suspension
Slam Specialties SS-8 8 Inch Diameter Suspension Air Spring, 1/2 Inch Port
(Part #9109021)
                        
Slam Specialties has done it again! This SS-8 Air Spring is a remarkable 40% lighter than the RE series and features integrated bump stops for strength and durability. Air spring collapses to 2.7 inches and extends to 13 inches. Non-ballooning design. Ideal for rear suspension over the axle where clearance is available. Soft riding characteristics. SS-8 air spring has a 250psi rating, and has an additional 1 inch more stroke than the RE series! Slam Specialties air springs are the perfect addition to your custom suspension, for a quality ride you will be sure to enjoy.
  • 250psi Pressure rating
  • 8" diameter
  • Collapses to 2.7"
  • Extends to 13"
  • Integrated Bump Stops for Strength and Durability
  • Non-Ballooning Design
  • 6061-T6 Custom CNC aluminum inserts and port meet and exceed thread strength of the RE series
  • (1) 1/2" NPT Port
  • (2) 3/8"-16 Mounting Holes in the Top Plate
  • (3) 3/8"-16 Mounting Holes in the Bottom Plate
  • Force to Collapse to 2.7": 30 lbs
  • Ideal for rear suspension over the axle where clearance is available. Soft riding characteristics