Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Replacement 7 Inch Fluted Headlights


Sold in Quantity:
Overall Diameter:
Outside Diameter:
Mounted Length:
Lens Color:
Bulb Type:
Lens Material:
Garage Sale:
Turn signal #910-64150 will not work in this light.

Share by Email


Click image to enlarge


Please NOTE the following about this product:

  • This item is sold as a pair.



Q & A

What's in the Box

Here's a slick 7" replacement tri-bar style headlight bulb that will outperform your old sealed beam headlights. In the past, tri-bar headlights looked good but performed terribly. These upgraded headlights feature high powered quartz halogen H4 bulbs and a newly designed curved lens and fluted reflector for improved lighting and better visibility. Chrome plated, molded plastic housing with a glass lens.

The perfect addition to a retro-rod or a sleek new street machine. Will directly replace 6014 sealed beam headlamps.

Wiring Chart (GIF)

You may also be interested in:

Universal Headlight Switch

This universal 3-position headlight switch features Off, Park, and Headlight/tailight. Screw type terminals. 7/16" mounting hole.

Has a 15 amp per circuit rating at 12 volts.

Universal Headlight Switch Instructions (PDF)

H.I.D Xenon White Headlight Bulbs
                        50% brighter than standard halogen bulbs.  If you are running H-4 type bulbs in your headlights, you can replace them with these brighter, blue-white bulbs.  
Speedway 7 Inch Tri-Bar Headlights

Speedway's traditional Tri-Bar H4 Halogen headlights allow you to have "the look" with out breaking the bank. Features a chrome plated, high impact plastic housing with a thick glass lens. These headlights do have high and low beams, but they DO NOT have turn signals.

  • 6-5/8" Headlight O.D.
  • High and Low beams
  • 12 volt H4 bulb included
  • Headlight pigtail NOT included
  • Uses common 3-prong connector

Headlight Wiring Chart (GIF)

Installation Instructions (PDF)  

NOTE: These headlights cannot make use of our L.E.D. Turn Signal Indicator for H-4 Bulbs, item # 910-64150.
Replacement Light Bulb - Halogen 12 Volt

Replacement Light Bulb - Halogen. 12 Volt

Wiring Chart (GIF)

LED 7 Inch Headlamp Bulb

Tested by our troops in Iraq, these headlights have proven to be efficient, rugged and bright. They are the common 7" diameter and will fit most applications that use the 6014 style bulb. The lens does extend out approximately 1" farther than the original so check for clearance issues. These are the latest technology in headlights and is that cure for the 'I can't see at night' blues.

  • DOT Approved, High Beam and Low Beam performance
  • Provides light output closer to the color temperature of daylight, dramatically improving light projection distance and overall visibility
  • Solid-state design resists damage from shock & vibration
  • Offers as much as 50x longer life (10,000 hrs vs 400 hrs) than comparable incandescent lamps, saving the time and expense of replacing lamps multiple times
  • Hard wired design, fully encapsulated electronics & anodized aluminum housing protect from damage caused by corrosive elements
  • Impact resistant polycarbonate lens protected against damage caused by debris and other hazards
  • Direct replacement for Par 56, H6014 and H6024 lamps
  • Sold each, two required.

911-27250 Instructions (PDF)

Replacement Quartz H-4 Bulb - 6 Volt
                        Replacement quartz H-4 6 volt bulb.  55 watts for low beam and 60 for high beam.
Headlight Bulb Pigtail Wire Connector

Three prong terminal with wire leads for 2 or 3 prong headlights. Also works for turn signal flasher. Wire size is 18 gauge.

Wiring Chart (GIF)

Replacement Quartz Halogen H-4 Headlight Bulb, 12 Volt

Quartz halogen H-4 bulb directly replaces standard-type 12 volt bulbs for improved night time visibility. Has a 60 watt high beam, 55 watt low beam.

Wiring Chart (GIF)