Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®


Posies 2030 Super Slide 35-48 Ford U-Bolt Kit, Traditional T-Frame

SAME DAY SHIPPING! Most orders ship within 24 hours.

Centerline of Holes:
Material Type:
Overall Length:
Sold in Quantity:
Thread Length:
Thread Pitch:
RH Male
Mounting Plate Length:
Mounting Plate Width:
Posies 2030 Super Slide 35-48 Ford U-Bolt Kit, Traditional T-Frame

Click image to enlarge



Q & A

What's in the Box

This 1935-48 Ford front U-Bolt kit from Posies is for use on our Traditional T-Frame 715-4800.


You may also be interested in:

Pro-Blend 1720 Anti-Seize Compound
(Part #91016009)

Apply Pro-Blend anti-seize directly to any metal surface that may gall or seize due to heat, pressure, torque loading or shock. Excellent in environments of gas, alcohol, water, solvents, dirt, sand, and grit.

  • Defies contact of dissimilar or like metals
  • Not affected by heat, moisture, salt water, or corrosion

Learn why using anti-seize is so important in our tech article, Installing New Hardware.

High Arch Transverse Rear Leaf Spring, 39 Inch
(Part #91043102)

These universal transverse rear leaf springs are perfect for those wanting to build a tradional looking T-bucket or Model A hotrod. Each cross spring is made from high grade tempered spring steel and is 2-1/4" wide, 39" eye-to-eye, and has 5 tapered leaves. Raises 6" to 8".

Five leaves, each 0.25" thick 

Spring eyes are 3/4" I.D. Black steel finish.

Rear Leaf Spring Specs (GIF)

Transverse Rear Leaf Spring Axle Mounting Brackets, Model T/Model A
(Part #91645108)

Use these brackets to mount a late model rear axle into a Model T - Model A Ford chassis when using a high-arch, 2-1/4" wide transverse rear leaf spring (like our 910-43102). Brackets locate the leaf spring directly above the axle housing. Includes zinc plated shackles with nylon bushings, weld-on brackets, and instructions.

916-45108 Instructions (PDF)

Traditional T Frame
(Part #7154800)

Our traditional T frame has an additonal 6" of kick-up in the rear and was designed to use our High-Arch leaf spring. Add our 6" drop front axle and you have a T in the weeds. Due to the radical stance of this chassis, we recommend using traditional steering. This frame provides you with a basic working platform, but fabrication skills are required to make it a complete chassis.

  • 23.5" wide @ front crossmember
  • 28.5" wide @ rear corssmember
  • 97" long front-to-back
  • 16" from bottom of frame rail to top of rear crossmember
  • Frame rails measure 3" tall X 1-1/2" wide and are .125 wall thickness 

This product requires a 3-4 week build time.