Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Ram 910100 Pre-86 Chevy 23.5 LB Clutch/Flywheel Combo 1-1/8 10-Spline

SAME DAY SHIPPING! Order within the next 12 hours 8 minutes and receive same day shipping

Specs
Weight:
23.50
Sold in Quantity:
Kit
Shaft Diameter:
1.13
Spline Count:
10
MFG. Part #:
910100
Garage Sale:
No
Ram 910100 Pre-86 Chevy 23.5 LB Clutch/Flywheel Combo 1-1/8 10-SplineRam 910100 Pre-86 Chevy 23.5 LB Clutch/Flywheel Combo 1-1/8 10-Spline
Ram 910100 Pre-86 Chevy 23.5 LB Clutch/Flywheel Combo 1-1/8 10-Spline

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

It doesn’t get any lighter than this! This clutch combo gets you a 153 tooth steel flywheel, a solid hub organic disc and a billet steel ring pressure plate.

Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

 

Item Details

Chevy Pre-1986, 1-1/8"
10 Spline

You may also be interested in:

Quarter Master 191100 Small Block Chevy Clutch & Flywheel Combo
SKU-910191100
                        Here is the ultimate Small Block Chevy Street Stock clutch! The 10.4" solid hub organic disc, lightweight steel-faced aluminum pressure plate, and steel flywheel combine to provide quick-revving performance with excellent holding capacity.  
  • 153 tooth steel flywheel - 29.2 lbs
  • Fits 1-1/8" x 10 spline input, Pre-'86
  • 10.4" Solid Hub Organic Friction Disc
  • For Early 2 PC Main Seal Cranks

Quarter Master Engineering & Design (PDF)

Note: This clutch assembly is for Race applications only - not intended for Street use.

Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

Hydraulic Release Bearing Set-Up Tool
SKU-91381090
                        Another Speedway exclusive -- makes hydraulic release bearing set-up as easy as 1-2-3. We all know what a pain it is to set the clearance on a hydraulic release bearing. With this handy little tool you will take the guess work and drudgery out of it. 

Simply hold the tool up to the bellhousing and push the rod in until it touches the pressure plate fingers. Then turn the tool around and place it up to the transmission, and you can check your clearance.

Made of heavy steel construction with a black oxide finish, so this tool won't wear out or break. Numbers are laser etched.

Hydraulic Release Bearing Set-Up Tool Instructions (PDF) 

Learn how to properly use this tool by reading our tech article How to Install a Hydraulic Throwout Bearing.

 

1955-1985 Small Block Chevy Stock Car Racing Clutch Kit
SKU-91025050
                        This stock car racing clutch package lets you order all the parts you need with one easy part number. 1-1/8"-10 spline disc. 

Included:
  • Bellhousing
  • 153 Tooth Lightweight Flywheel
  • ARP Flywheel Bolts
  • 10-1/2" Lightweight Pressure Plate
  • ARP Pressure Plate Bolts
  • Solid Hub Organic Clutch Disc
  • Hydraulic Release Bearing
  • Extended Pilot Bearing
  • Clutch Alignment Tool
Quick Time RM-6010 Chevy Steel Trans Bellhousing, Hydraulic Linkage
SKU-91027010
                        

These strong, lightweight steel bellhousings from Quick Time are just the ticket for installing a manual transmission behind your Small Block or Big Block Chevy V-8. The compact design allows the bellhousings to fit in tight quarters while still accommodating a 10-1/2" clutch. Must be used with a hyraulic throwout clutch release bearing and a mini starter.  

  • Lightest steel bellhousing available anywhere
  • Cone is spun (not rolled or stamped) for extreme dimensional stability
  • High grade steel — work hardens to over 80,000 PSI strength
  • Over 2 times the strength of any other steel bellhousing
  • Engine = Small Block Chevy, Big Block Chevy, LT1
  • Trans. = Muncie, Richmond, Saginaw, Falcon, Bert, Jerico 4-5 Speed, Brinn, Chevy TKO 500/600, BW-T10
  • Max Clutch Diameter = 10.5"
  • Flywheel = 153 tooth
  • Drilled for most major throwout bearings
  • Passed SFI testing
  • Engine plate and grade 8 bolts included
  • Must use mini starter

Fits common GM transmisson bolt pattern. Includes lower flywheel cover and grade 8 bolts. Only 18 lbs.

ARP Fasteners 200-2902 Chevy Flexplate Bolts
SKU-1012002902
                        

Flexplate bolts play an important role in the performance and safety of race cars and street machines alike. That’s why the fastener experts at ARP develop special bolts that are far superior to OEM hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining.

Fits Chevrolet 90° V6 & 265-454 Chevy V8 with 2-Pc rear seal. Set of 6 bolts.

  • Exclusive, flat, 12-point head design
  • Larger than stock shank diameter for increased strength and improved flexplate register
  • Originally developed for NASCAR Winston Cup competition
  • 200,000 psi rating