Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Ram Clutches BU656K Kevlar Pilot Bushing, S/B and B/B Chevy

SAME DAY SHIPPING!

Specs
Material Type:
Kevlar
Sold in Quantity:
Each
Outside Diameter:
1.09
Bushing Length:
.75
Bushing Diameter:
.60
MFG. Part #:
BU656K

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

This replacement 1955-04 SB/BB Chevy pilot bushing is CNC machined from a Nylon/Kevlar composite that has a wear life five times longer than steel and prevents input shaft scoring.

Even better, it does not require grease, which eliminates the possibility of contaminating the clutch.

  • .598" I.D.
  • 1.105" O.D. 

You may also be interested in:

Speedway GM Standard Clutch Throwout Fork
                        Standard style fork with a pocket for the clutch pushrod. Fork fits 1973-1984 GM 6 & 8 cylinder cars and trucks. May fit earlier vehicles with slight modification.
                    
GM Stock Clutch Hydraulic Throwout Bearing
                        

Stock clutch hydraulic throwout bearing for stock-style 3-speed and 4-speed Chevy clutches only. Install simply by replacing one bolt from the front of the transmission with one of the provided studs, then shim to fit. Use 3/4" bore master cylinder.

This bearing is made much smaller than the racing version so that it will fit behind the "thicker" stock style clutches. This redesigned new housing is much cleaner as it has no boss on the body. Plus, this design also has a retainer on it to prevent over extension and seal damage.

GM Stock Clutch Hydraulic Throwout Bearing Instructions (PDF)

Learn more about hydraulic release bearings and how to properly install them by reading our tech article. How to Install a Hydraulic Throwout Bearing.

Hydraulic Release Bearing Set-Up Tool
                        Another Speedway exclusive -- makes hydraulic release bearing set-up as easy as 1-2-3. We all know what a pain it is to set the clearance on a hydraulic release bearing. With this handy little tool you will take the guess work and drudgery out of it. 

Simply hold the tool up to the bellhousing and push the rod in until it touches the pressure plate fingers. Then turn the tool around and place it up to the transmission, and you can check your clearance.

Made of heavy steel construction with a black oxide finish, so this tool won't wear out or break. Numbers are laser etched.

Hydraulic Release Bearing Set-Up Tool Instructions (PDF) 

Learn how to properly use this tool by reading our tech article How to Install a Hydraulic Throwout Bearing.

 

Chevy Roller Pilot Bearing
                        

This Chevy roller pilot bearing eliminates premature bushing failure and insures clean clutch release.

Instruction Sheet (PDF)