Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Quarter Turn Fastener Hole Setting Tool


Share by Email


Click image to enlarge




Q & A

What's in the Box

  • Locate and pre-drill perfect hole locations
  • 1/4” pilot 
  • Stainless steel construction
Measurement Guide (Link)

You may also be interested in:

Steel Oval Head Quarter Turn Fasteners, .500 Inch Grip, Pack/10

These 1/4 turn panel fasteners quickly fasten body panels, doors, tilt fronts and hood panels. Zinc plated steel.

Use .500" grip range for thin materials, use .550" for mid-materials, and .600" and up for thick materials.

Measurement Guide (Link)

Transfer Punch for Quarter Turn Fasteners

Slip this over the spring, hold the panel up in place and tap lightly with rubber hammer. You now have a mark to drill for the fastener.

Measurement Guide (Link)

Lightweight Quarter Turn Fasteners, .500 Inch Grip, Pack/10

1/4-turn hollow steel panel fasteners with washers. Save 50% in weight.  Package of ten.

Measurement Guide (Link)

Flat Quarter Turn Fastener Springs, Pack/10

Steel 1/4-turn panel fastener springs mount easily with pop rivets. Height of the spring from the mounting surface to the latching area is 0.150" to 0.175". Eye-to-eye measurement is 1-3/8".

Measurement Guide (Link)

Speedway Deluxe Quarter Turn Fastener Tool

Stop using a doesn't fit! This tool makes fast and easy work of removing and attaching panels fastened with 1/4-turn fasteners. Great gift idea!

Measurement Guide (Link)