Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Quarter Master 191300 Ford Clutch and Flywheel Combo

Price:
$799.99
EA
In Stock
Item #:
910191300
Item Details:
1 1/8"-10 Spline
internal balance only
Quarter Master 191300 Ford Clutch and Flywheel Combo
Click image to enlarge Click image to enlarge
No video at this time.
 
Here is the ultimate S/B Ford Street Stock clutch! The 10.4" solid hub organic disc, lightweight steel-faced aluminum pressure plate, and steel flywheel combine to provide quick-revving performance with excellent holding capacity.  
  • 157 tooth steel flywheel - 30.8 lbs
  • Fits 1-1/8" x 10 spline input
  • 10.4" Solid Hub Organic Friction Disc
  • Internal Balance Only
  • Lightweight aluminum pressure plate

Quarter Master Engineering & Design (PDF)

Note: For Race applications only - not intended for Street use.

Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

 

Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
You May Also Be Interested In...
  • Speedway Pull Type Slave Cylinder
    Speedway Pull Type Slave Cylinder
    (3 Ratings)
    Price: $34.99
    More Info
    Speedway Pull Type Slave Cylinder
    x 
    							                        
    
                                                        
    Speedway pull type slave cylinder with 7/8" bore for clutch use. Works great with stock-style hydraulic throwout bearings or Ram Couplers. Has a 3/8"-24 inverted flare female inlet. Bleeder adapter and bleeder are included.
    • Ram shaft is 3/8" O.D.
    • Cylinder body is 4.09" long
    • Cylinder body is 1-7/16" O.D. at end by fittings
    • Cylinder body is 1-3/8" at opposite end of fittings
    A 5/16” heim will fit both ends of cylinder (not included). Our heim part number is 1750202.

    Note: For most multi-disc clutch set-ups we recommend the use of a smaller 3/4" bore master cylinder.
  • Ram Clutches 1021 10.5 Inch Metallic Clutch Disc, 1-1/8 Inch 10-Spline
    Ram Clutches 1021 10.5 Inch Metallic Clutch Disc, 1-1/8 Inch 10-Spline
    Price: $209.99
    More Info
    Ram Clutches 1021 10.5 Inch Metallic Clutch Disc, 1-1/8 Inch 10-Spline
    x 
    							                        
    
                                                        
    These 10-1/2" diameter 6 pad clutch discs feature a metallic friction compound and a flat face solid hub. For single disc style pressure plates. Weighs 3 lbs.
    Tech Tip:  When installing  a new clutch, be sure to follow the manufacturer's instructions for  correct set-up.  You should also replace the pilot bushing/bearing.
    Tech Tip:   To extend the life of your expensive racing clutch you should not use  it to load the car on or in your trailer.  The amount of slippage this  causes is worse than a night of racing. 
     
  • Ram Clutches 255 10.5 Inch Organic Clutch Disc, 1-1/16 Inch 10-Spline
    Ram Clutches 255 10.5 Inch Organic Clutch Disc, 1-1/16 Inch 10-Spline
    Price: $134.99
    More Info
    Ram Clutches 255 10.5 Inch Organic Clutch Disc, 1-1/16 Inch 10-Spline
    x 
    							                        
    
                                                        
    10-1/2", single clutch disc. Organic disc for single disc pressure plate, weighs 2.5 lbs. Full face design with solid hub.
    Tech Tip:  When installing  a new clutch, be sure to follow the manufacturer's instructions for  correct set-up.  You should also replace the pilot bushing/bearing.
    Tech Tip:   To extend the life of your expensive racing clutch you should not use  it to load the car on or in your trailer.  The amount of slippage this  causes is worse than a night of racing. 
     
  • Ram Clutches 434 10-1/2 Inch Ford Pressure Plate, Nodular Ring 18 Lbs
    Ram Clutches 434 10-1/2 Inch Ford Pressure Plate, Nodular Ring 18 Lbs
    Price: $199.99
    More Info
    Ram Clutches 434 10-1/2 Inch Ford Pressure Plate, Nodular Ring 18 Lbs
    x 
    							                        
    
                                                        
    Ram clutches for 'stock clutch rule' classes give you unmatched performance and durability. These 10.5 inch diameter assemblies utilize a nodular iron pressure ring which provides a durable mating surface for the clutch disc. A 2800 lb. pressure spring provides increased static pressure over stock clutches. 
    If your rules require a full facing or sprung hub disc, the Ram  300 Series organic racing disc provides the best holding power of any  organic disc available and adds only about 2 pounds to the total weight  of the set.
    All Ram street stock clutches are completely rebuildable by the factory.
    Tech Tip:  When installing  a new clutch, be sure to follow the manufacturer's instructions for  correct set-up.  You should also replace the pilot bushing/bearing.
    Tech Tip:   To extend the life of your expensive racing clutch you should not use  it to load the car on or in your trailer.  The amount of slippage this  causes is worse than a night of racing.