Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

QA1 5096 Steel Bearing End Shock, 9 Inch Stroke, 6/6 Valving

Price:$99.99
5096 - QA1 Steel Bearing End Shock, 9" Stroke, 6/6 Valving
Price:
$99.99
EA
In Stock
Item #:
7215096
QA1 5096 Steel Bearing End Shock, 9 Inch Stroke, 6/6 Valving
Click image to enlarge Click image to enlarge
No video at this time.
 

Removable bearing mount allows installation of rubber bumpers or shock extensions. Can also be used with coil-over mount kit - slight drilling of upper spring mount required.

  • Racer Revalveable & Rebuildable
  • No Valving Overlap
  • Precision Machined Piston with P.T.F.E. Piston Band
  • 15mm Centerless Ground, Hard Chrome Plated, Solid Piston Rod
  • Deflective Disc Valving
  • Twin Tube Design
  • 2" O.D. Steel Body
  • Can Be Run Upside Down
  • Use Large Body Tuning Kit # TK01 For Valve Combination Changes Between 0-13

QA1 Bearing End Shock Chart (GIF)

  • 7215096
    MFG. Part #
    5096
    Shock Type
    Twin Tube
    Extended Length
    24.000"
    Compressed Length
    15.000"
    Adjustability
    Non-Adjustable
    Valve Positions
    6 compression - 6 rebound
    Body Diameter
    2.000"
    Upper Shock Mount
    1/2 Inch Eyelet
    Lower Shock Mount
    1/2 Inch Eyelet
    Shock Eyelet Width
    0.625" (5/8")
    Bolt Hole Circle
    0.500" (1/2")
    Shock Body Material
    Steel
    Bushing Material
    Steel
    Coil-Over Compatible
    Yes
    Hardware Included
    No
    Finish
    Powder Coat
    Sold in Quantity
    Each
QA1
QA1
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
Our Techs also Suggest the Following:
Coil-Over Kit, 2" Body, 5" Sleeve
Item #:
91046236
Coil-Over Kit, 2" Body, 7" Sleeve
Item #:
91046238
QA1 Coil-Over Thrust Bearing Kit
Price:
$30.99
KT
In Stock
Item #:
7217888
You May Also Be Interested In...
  • IMCA Approved 5 Inch Rear Spring Coilover Kit, 5 Inch Sleeve
    IMCA Approved 5 Inch Rear Spring Coilover Kit, 5 Inch Sleeve
    (1 Rating)
    Price: $74.99
    More Info
    IMCA Approved 5 Inch Rear Spring Coilover Kit, 5 Inch Sleeve
    x 
    							                        
    
                                                        
    For 2005, IMCA allows modifieds to run 5" spring coil over kits on their steel rear shocks. We offer the complete kit with coilover kit and 5" spring plates. Choose Bilstein, Pro, QA1, Carrera or Monroe steel shocks.
    Coil-Over Mounting Guide (GIF)
  • Lightweight 5 Inch Spring Coil-over Adapter Kit
    Lightweight 5 Inch Spring Coil-over Adapter Kit
    (1 Rating)
    Price: $64.99
    More Info
    Lightweight 5 Inch Spring Coil-over Adapter Kit
    x 
    							                        
    
                                                        Complete kit to adapt your 2-1/2" coil-over kit to the IMCA approved 5" spring. Available for Bilstein, Pro, QA1, Carrera, or Monroe steel shocks.
  • QA1 5093 Steel Bearing End Shock, 9 Inch Stroke, 3/3 Valving
    QA1 5093 Steel Bearing End Shock, 9 Inch Stroke, 3/3 Valving
    Price: $99.99
    More Info
    QA1 5093 Steel Bearing End Shock, 9 Inch Stroke, 3/3 Valving
    x 
    							                        
    
                                                        
    Removable bearing mount allows installation of rubber bumpers or shock extensions. Can also be used with coil-over mount kit - slight drilling of upper spring mount required.
    • Racer Revalveable & Rebuildable 
    • No Valving Overlap 
    • Precision Machined Piston with P.T.F.E. Piston Band 
    • 15mm Centerless Ground, Hard Chrome Plated, Solid Piston Rod 
    • Deflective Disc Valving 
    • Twin Tube Design 
    • 2" O.D. Steel Body 
    • Can Be Run Upside Down 
    • Use Large Body Tuning Kit # TK01 For Valve Combination Changes Between 0-13
    QA1 Bearing End Shock Chart (GIF)
  • QA1 5094 Steel Bearing End Shock, 9 Inch Stroke, 4/4 Valving
    QA1 5094 Steel Bearing End Shock, 9 Inch Stroke, 4/4 Valving
    Price: $99.99
    More Info
    QA1 5094 Steel Bearing End Shock, 9 Inch Stroke, 4/4 Valving
    x 
    							                        
    
                                                        
    Removable bearing mount allows installation of rubber bumpers or shock extensions. Can also be used with coil-over mount kit - slight drilling of upper spring mount required.
    • Racer Revalveable & Rebuildable 
    • No Valving Overlap 
    • Precision Machined Piston with P.T.F.E. Piston Band 
    • 15mm Centerless Ground, Hard Chrome Plated, Solid Piston Rod 
    • Deflective Disc Valving 
    • Twin Tube Design 
    • 2" O.D. Steel Body 
    • Can Be Run Upside Down 
    • Use Large Body Tuning Kit # TK01 For Valve Combination Changes Between 0-13
    QA1 Bearing End Shock Chart (GIF)
  • QA1 5095 Steel Bearing End Shock, 9 Inch Stroke, 5/5 Valving
    QA1 5095 Steel Bearing End Shock, 9 Inch Stroke, 5/5 Valving
    Price: $99.99
    More Info
    QA1 5095 Steel Bearing End Shock, 9 Inch Stroke, 5/5 Valving
    x 
    							                        
    
                                                        
    Removable bearing mount allows installation of rubber bumpers or shock extensions. Can also be used with coil-over mount kit - slight drilling of upper spring mount required.
    • Racer Revalveable & Rebuildable 
    • No Valving Overlap 
    • Precision Machined Piston with P.T.F.E. Piston Band 
    • 15mm Centerless Ground, Hard Chrome Plated, Solid Piston Rod 
    • Deflective Disc Valving 
    • Twin Tube Design 
    • 2" O.D. Steel Body 
    • Can Be Run Upside Down 
    • Use Large Body Tuning Kit # TK01 For Valve Combination Changes Between 0-13
    QA1 Bearing End Shock Chart (GIF)
  • QA1 5093-5 Steel Bearing End Shock, 9 Inch Stroke, 3/5 Valving
    QA1 5093-5 Steel Bearing End Shock, 9 Inch Stroke, 3/5 Valving
    Price: $99.99
    More Info
    QA1 5093-5 Steel Bearing End Shock, 9 Inch Stroke, 3/5 Valving
    x 
    							                        
    
                                                        
    Removable bearing mount allows installation of rubber bumpers or shock extensions. Can also be used with coil-over mount kit - slight drilling of upper spring mount required.
    • Racer Revalveable & Rebuildable 
    • No Valving Overlap 
    • Precision Machined Piston with P.T.F.E. Piston Band 
    • 15mm Centerless Ground, Hard Chrome Plated, Solid Piston Rod 
    • Deflective Disc Valving 
    • Twin Tube Design 
    • 2" O.D. Steel Body 
    • Can Be Run Upside Down 
    • Use Large Body Tuning Kit # TK01 For Valve Combination Changes Between 0-13
    QA1 Bearing End Shock Chart (GIF)
  • QA1 5094-6 Steel Bearing End Shock, 9 Inch Stroke, 4/6 Valving
    QA1 5094-6 Steel Bearing End Shock, 9 Inch Stroke, 4/6 Valving
    Price: $99.99
    More Info
    QA1 5094-6 Steel Bearing End Shock, 9 Inch Stroke, 4/6 Valving
    x 
    							                        
    
                                                        
    Removable bearing mount allows installation of rubber bumpers or shock extensions. Can also be used with coil-over mount kit - slight drilling of upper spring mount required.
    • Racer Revalveable & Rebuildable 
    • No Valving Overlap 
    • Precision Machined Piston with P.T.F.E. Piston Band 
    • 15mm Centerless Ground, Hard Chrome Plated, Solid Piston Rod 
    • Deflective Disc Valving 
    • Twin Tube Design 
    • 2" O.D. Steel Body 
    • Can Be Run Upside Down 
    • Use Large Body Tuning Kit # TK01 For Valve Combination Changes Between 0-13
    QA1 Bearing End Shock Chart (GIF)
  • QA1 5095-3 Steel Bearing End Shock, 9 Inch Stroke, 5/3 Valving
    QA1 5095-3 Steel Bearing End Shock, 9 Inch Stroke, 5/3 Valving
    Price: $99.99
    More Info
    QA1 5095-3 Steel Bearing End Shock, 9 Inch Stroke, 5/3 Valving
    x 
    							                        
    
                                                        
    Removable bearing mount allows installation of rubber bumpers or shock extensions. Can also be used with coil-over mount kit - slight drilling of upper spring mount required.
    • Racer Revalveable & Rebuildable 
    • No Valving Overlap 
    • Precision Machined Piston with P.T.F.E. Piston Band 
    • 15mm Centerless Ground, Hard Chrome Plated, Solid Piston Rod 
    • Deflective Disc Valving 
    • Twin Tube Design 
    • 2" O.D. Steel Body 
    • Can Be Run Upside Down 
    • Use Large Body Tuning Kit # TK01 For Valve Combination Changes Between 0-13
    QA1 Bearing End Shock Chart (GIF)