Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Professional Products 52030 Power Plus Hurricane 57-95 SBC Intake-Pol.

SAME DAY SHIPPING! Order within the next 14 hours 16 minutes and receive same day shipping

Specs
Material Type:
Aluminum
Overall Height:
6.06
Sold in Quantity:
Each
Finish:
Polished
Mounted Height:
5.12
MFG. Part #:
52030
Intake Manifold Type:
Single Plane
Carburetor Quantity:
One
Carburetor Flange Type:
4-Barrel Square Bore
Professional Products 52030 Power Plus Hurricane 57-95 SBC Intake-Pol.
Professional Products 52030 Power Plus Hurricane 57-95 SBC Intake-Pol.

Click image to enlarge

Speeday Motors Logo
X
Professional Products 52030 Power Plus Hurricane 57-95 SBC Intake-Pol.

Details

Reviews

Q & A

What's in the Box

No other performance intake manifold on the market is available with all the features and benefits found in the Power+Plus High Performance Racing Manifold.  These 360° manifolds feature dual distributor hold downs for Chevy, four corner water outlets, and line of sight port configuration. They also have extended port dividers, thermostat recess, and an accessory bracket boss and tapped hole. There is an air gap under the front water crossover for extra cooling and an extra tapped water port. 

These manifolds have permanent mold castings for accurate port placement, tighter grain castings, and less porosity. They have nitrous bosses, measure 5.12" from carb base to bottom of manifold, and are available in satin finish or polished (the area under the intake runners is not polished). RPM range is 3000-7500 RPM.

Dyno Chart (PDF)

910-11290 Instructions (PDF) 

You may also be interested in:

Edelbrock 2925 Super Victor Small Block Chevy Intake Manifold
                        

Edelbrock's Super Victor (3500-8500 rpm) is a high-performance, feature-packed racing manifold for standard port location 23-degree cylinder heads. A taller profile with extra long runners that extend into the plenum offers increased volume. The cross-sectional area of the runners are tuned to complement the runner length creating substantial torque increases at 4500-5500 rpm.

For Chevrolet 262-400 c.i. Small-Block V8. The Super Victor is designed for heads with standard port location and the runners match the "flat floor" entry of the latest 23° heads. It's about 1" taller than the Victor Jr., putting the carb pad height at 5-1/2" from end seals.

  • Slotted flange bolt holes to allow mating on decked blocks or milled heads
  • Rear water outlets allow custom cooling system routing
  • Flange above the intake ports is machined flat to provide a straight-line reference for port-matching layout
  • A boss for a distributor clamp has been added on the left side, for easier to access when timing an engine
  • Each runner has a nitrous boss to aid in fogger nozzle installation

325-2925 Instructions (PDF)

Professional Products 52031 Power Plus Hurricane 57-95 SB Chevy Intake
                        

No other performance intake manifold on the market is available with all the features and benefits found in the Power+Plus High Performance Racing Manifold.  These 360° manifolds feature dual distributor hold downs for Chevy, four corner water outlets, and line of sight port configuration. They also have extended port dividers, thermostat recess, and an accessory bracket boss and tapped hole. There is an air gap under the front water crossover for extra cooling and an extra tapped water port. 

These manifolds have permanent mold castings for accurate port placement, tighter grain castings, and less porosity. They have nitrous bosses, measure 5.12" from carb base to bottom of manifold, and are available in satin finish or polished (the area under the intake runners is not polished). RPM range is 3000-7500 RPM.

Dyno Chart (PDF)

910-11280 Instructions (PDF) 

Open 4 Barrel Carburetor Base Gasket
                        Open base gaskets.
                    
SuperSeal Small Block Chevy Intake Gasket Set, 1205 Style, Standard
                        

SuperSeal high-performance intake manifold gaskets for 265-400 SB Chevy V8 engines.

  • No end seals - use silicone gasket maker
  • Heat crossover port is blocked
  • Compare to Fel-Pro
ARP Fasteners 334-2103 1.250 Stainless Steel Intake Bolts
                        300-series stainless steel.  One bolt head drilled for NASCAR wire seal.  Harden for accurate torquing.  S/B Chevy, 12 point head, 170,000 PSI.