Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Pro Shocks C320 Pro Coilover Kit - Large Body Threaded, 2-1/2 Inch

SAME DAY SHIPPING!

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

For threaded large body shocks. Available for  2-1/2" I.D. springs.

Coil-Over Mounting Guide (GIF)

Coil-Over Illustration (GIF)

Item Details

You may also be interested in:

Pro Shocks C375 Coil-over Kit for SBA Small Body Shock
                        

For early design Pro small body smooth aluminum shocks that have retaining clip groove, for 1-7/8" I.D. springs. 4" in length. SBA shocks are 1.63" O.D.

Note: Current Pro small body smooth aluminum shocks do not have the retaining clip groove and therefore are a non-coilover design shock. If a coil-over shock is required, a threaded body shock must be used in conjunction with coil-over kit 582-C330 for 1-7/8" springs or 582-C335 for 2-1/2" springs.

Coil-Over Mounting Guide (GIF)

Pro Shocks SB51 Pro Small Body Steel Shock-5 In. Stroke, Comp 1, Reb 1
                        

Pro Steel small body shocks have a non-adjustable zinc plated gas cell shock. Carbon steel shaft is chromed and centerless ground for longer seal life. Features a unique 1/2" removable bearing mount. Shocks are sold less bearing ends. OK for use with coil overs.  1.63 diameter.

5" Stroke -- Compression Length: 10.65", Extension Length: 15.65" 

Pro Small Steel Shock Chart Application (GIF)

Pro Shocks A730B Aluminum 7 Inch Shock - Large Body, Comp 3, Reb 3
                        

Pro Shocks Ultimate Series shocks have dyno serial numbers and come with a dyno sheet. "A" Series Shocks feature a large smooth body shock.

Comp. Length: 12-1/2"
Ext. Length: 19-1/2"

Application Chart (GIF)

Pro Shocks C335 Pro Coilover Kit - Small Body Threaded, 2-1/2 Inch
                        

For threaded small body shocks.

Coil-Over Mounting Guide (GIF)

Coil-Over Illustration (GIF)

Pro Coilover Kit - Clip Only
                        Pro Coilover Kit - Clip Only
                    
QA1 7888-109 Coil-Over Thrust Bearing Kit
                        

This kit installs at the bottom of the 2-1/2" I.D. coil-over spring and allows easier adjustment of your ride height.

  • Includes two bearings and four washers
  • Kit services two coilovers
  • 2.512" I.D.
  • 3.233" O.D.