Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Pro-Blend 1720 Anti-Seize Compound

Price:$7.99
Pro-Blend Anti-Seize
Price:
$7.99
EA
In Stock
Item #:
91016009
Pro-Blend 1720 Anti-Seize Compound
Click image to enlarge Click image to enlarge
No video at this time.
 

Apply Pro-Blend anti-seize directly to any metal surface that may gall or seize due to heat, pressure, torque loading or shock. Excellent in environments of gas, alcohol, water, solvents, dirt, sand, and grit.

  • Defies contact of dissimilar or like metals
  • Not affected by heat, moisture, salt water, or corrosion

Learn why using anti-seize is so important in our tech article, Installing New Hardware.

Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
You May Also Be Interested In...
  • Red Line 80402 CV-2 Synthetic Grease
    Red Line 80402 CV-2 Synthetic Grease
    Price: $11.99
    More Info
    Red Line 80402 CV-2 Synthetic Grease
    x 
    							                        
    
                                                        
    Red Line’s team of chemists formulate  fully-synthetic lubricants using only the world’s  finest base stocks. At Red Line, it’s not designed to be the cheapest – it’s built to be the best.  Red Line only uses superior polyester-based products – resulting in  lubricants that are extremely stable at high temperatures.
                Synthetic CV-2 grease provides excellent water resistance, low temperature flow, and its very high melting point allows it to be used in high temperature wheel bearings, high angle and conventional CV-joints, chassis lubrication and many industrial applications.
    • Outperforms the best conventional or synthetic greases and lubes
    • Excellent high-temp stability, extreme-pressure protection, and water resistance
    • Used in a variety of applications with operating temps from -100°F to 500°F
    • Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals
    • Contains an organic moly for chassis lubrication and high temp/high speed industrial equipment
    • Synthetic fluidity allows increases in bearing life up to 200%
    • Contains a red moly compound which is a superior lubricant to black moly disulfide lubricants
  • Elgin Assembly Lube, 4 Oz.
    Elgin Assembly Lube, 4 Oz.
    Price: $5.99
    More Info
    Elgin Assembly Lube, 4 Oz.
    x 
    							                        
    
                                                        
    Eliminates galling, metal transfer and oil starvation during initial break-in. Adheres to metal surfaces, will not drain off. Apply to bearings, gears, crankshafts, cam lobes, valve stems, lifters and all mating parts with close tolerances.
    For gas, alcohol and nitro engines.
    Learn why using assembly lube is so important in our tech article, Installing New Hardware.
  • Red Line 80312 Engine Assembly Lube, 4 Oz.
    Red Line 80312 Engine Assembly Lube, 4 Oz.
    (3 Ratings)
    Price: $7.99
    More Info
    Red Line 80312 Engine Assembly Lube, 4 Oz.
    x 
    							                        
    
                                                        
    Red Line Oil Assembly Lube is not designed to be the cheapest – it's built to be the best. It has three times greater film-strength than conventional black Molybdenum Disulfide lubricants. Provides excellent rust and corrosion protection. Stays put and supplies a high film strength for protection. Excellent for crankshaft installation. Can be used safely with all metals, including bearings. Can be used with petroleum or synthetic oils.
    • Prepares potential wear surface and prevents metal contact before adequate lubrication can be supplied
    • Will not plug filters after initial engine start-up, unlike other assembly lubes
    • Provides 3x greater film strength than conventional black Molybdenum Disulfide greases
    • Excellent rust and corrosion inhibitor, allows for long-term storage
    • For use on camshafts, lifters, pushrods, piston skirts, main and rod bearings, and bolt threads
    • Do not use on exhaust bolts or other high temperature bolts which require an anti-seize
    • Recommended and used by top camshaft and drivetrain manufacturers
    Assembly Lube Product Data (PDF)
    Learn why using assembly lube is so important in our tech article, Installing New Hardware.