Premium Small Block Chevy Rotating Assembly, 350 Flat Top, 5.7 Inch Rods

							                        

                                                        Speedway Gas Proven piston rings are the best value in piston rings! These tough rings will withstand 12.5 maximum compression, 7000 maximum sustained RPM, and up to 450 HP. First and second rings are cast iron yielding 55,000 psi strength with end gap factory set at .012" to .018". Three piece oil ring features chrome rails over a stainless steel expander, which gives uniform wall pressure and efficient oil control.  
Designed for gasoline use. Not recommended for use with alcohol.
Ring Style Chart (GIF)
                                                    

						                        

							                        

                                                        
By using an 80,000 psi low friction, low porosity plasma moly top ring along with purpose build second and oil rings, we have the best rings for the buck on the market. You will make more horsepower over other brands using these rings due to the unique design and ring face finish. 20+ additional horsepower has been seen using these rings. File fit design. 
Top  1/16"
2nd  1/16"
Oil  3/16" 
Ring Style Chart (GIF)
                                                    

						                        

							                        

                                                        
Eliminates galling, metal transfer and oil starvation during initial break-in. Adheres to metal surfaces, will not drain off. Apply to bearings, gears, crankshafts, cam lobes, valve stems, lifters and all mating parts with close tolerances.
For gas, alcohol and nitro engines.
                                                    

						                        

							                        

                                                        Place a piece of this thread on a rod or main journal, torque cap in place, remove cap and by using the included chart, you know what your bearing clearance is. You should have one of each when assembling your engine. 
                                                    
						                        

							                        

                                                        Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 
All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A  kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately.
                                                    

						                        

							                        

                                                        Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 
All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A  kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately.
                                                    

						                        

							                        

                                                        Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 
All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A  kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately.
                                                    

						                        

							                        

                                                        Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 
All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A  kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately.
                                                    

						                        

							                        

                                                        Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 
All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A  kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately.
                                                    

						                        

							                        

                                                        Speedway introduces rotating assemblies, with an optional balance job. Includes 2-pc rear main seal cast steel crank, rods and pistons. Cranks are new so they use standard size bearings. 
All balancing is done with our state-of-the-art "hines" balancer by race mechanics with over 30 years of experience! A kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately.
                                                    

						                        

							                        

                                                        Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 
All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A  kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately.
                                                    

						                        

							                        

                                                        Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 
All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A  kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately.
                                                    

						                        

							                        

                                                        Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 
All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A  kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately.
                                                    

						                        

							                        

                                                        Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 
All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A  kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately.
                                                    

						                        

							                        

                                                        Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 
All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A  kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately.
                                                    

						                        

							                        

                                                        Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 
All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A  kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately.
                                                    

						                        

							                        

                                                        Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 
All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A  kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately. 
NOTE: 377 Kit includes main bearing spacers 
                                                    

						                        

							                        

                                                        Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 
All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A  kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately.
NOTE: 377 Kit includes main bearing spacers  
                                                    

						                        

							                        

                                                        Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 
All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A  kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately.
NOTE: 377 Kit includes main bearing spacers  
                                                    

						                        

							                        

                                                        Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 
All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A  kit purchased with the optional balance job will ship in 24-48 hours.
NOTE: Piston rings are not included and must be purchased separately.
NOTE: 377 Kit includes main bearing spacers