Products to Compare (max of 3)
X
Compare These Parts
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Help Center
Help Center
x
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/16 Inch

SAME DAY SHIPPING! Order within the next 2 hours 28 minutes and receive same day shipping

Specs
Material Type:
Steel
Threads:
RH Male
Finish:
Natural
Thread Pitch:
10-32
Hole Diameter:
0.1875
Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/16 Inch

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.

Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

ASSEMBLY TIP:
To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Standard Heim Sizes Chart (GIF)

Customer Reviews

This product has no reviews.

Product Q&A

0 questions : 0 answers

No questions have been asked.

You may also be interested in:

Aluminum Heim Joint Rod Ends, 3/16 Inch (10-32) RH Male
(Part #1170800)
                        

Aluminum rod ends are a close tolerance, 3-piece, medium duty design. Hard anodized 7075-T6 aerospace quality aluminum body. Heat treated, 5210 precision ground ball, Kevlar race. Self lubricating Teflon liner seals out dirt and debris.

Applications: Designed for motorsports application where weight is critical. All of the strength & features of the Precision rod ends at half of the weight.

Assembly Tip:
To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Aluminum Rod Ends Chart (GIF)

Standard Steel Heim Joint Rod Ends, 3/16 Inch (10-32) RH Male
(Part #1750100)
                        

These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Swedged Aluminum Throttle Linkage Tubes, 3/16 Inch (10-32) Thread
(Part #94055301)
                        

This swedged throttle linkage tubing is tapped 3/16" (10-32) LH and RH thread. One end of the throttle rod will have left hand threads, and the other end will have right hand threads. Made of 5/16" x 0.049 round aluminum tubing.

Note: When measuring for your tube length, you will want to allow 1.5" in length for the rod ends (3/4" of length for each end when calculating your eye-to-eye measurement. For instance, an eye-to-eye length of 11.5" would require a 10" swedged tube.

Swed Steel Throttle Linkage Tubes, 3/16 Inch (10-32) Thread
(Part #910356)
                        

This swedged throttle linkage tubing is tapped for a 3/16" (10-32) thread. One end will have left hand threads, and the other end will have right hand threads. Made of 5/16" x 0.049 round steel tubing.

Note: When measuring for your tube length, you will want to allow 1.5" in length for the rod ends (3/4" of length for each end when calculating your eye-to-eye measurement. For instance, an eye-to-eye length of 11.5" would require a 10" swedged tube.

 

 6" are clearance priced!!

Aluminum Jam Nuts, 10-32 RH, Pack/6
(Part #3159592)
                        

These jam nuts are made of 7075 aluminum alloy and are clear anodized for corrosion resistance. Fine thread for use with rod ends, heim joints, and clevis.

Sold in package of six.

Item Details

3/8" hex