Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Power+Plus Hurricane 302 Ford Manifold

Price: $249.99 - $299.99
54031 - FORD 302 INTAKE MANIFOLD
Item #:
91011230
Power+Plus Hurricane 302 Ford Manifold
Click image to enlarge Click image to enlarge
  • Power+Plus Hurricane 302 Ford Manifold
  • Power+Plus Hurricane 302 Ford Manifold
No video at this time.
 
This manifold is designed for racing or serious street applications using stock cast-iron or aftermarket Windsor style cylinder heads. Includes bosses that can be drilled and tapped for nitrous. It features a rear water crossover passage along with four corner tapped water ports. Ports are 1.90” x 1.08” at the gasket flange and the manifold contains enough material to open ports to 2.10” x 1.25”. Use Professional Products intake gasket #54600 or Fel-Pro intake gasket #1250 or #1262. This manifold includes a 1/8-NPT vacuum port under the carb flange, a feature lacking in competitive manifolds of this type. Note that due to the port layout on small block Ford engines, a single plane manifold, such as this one, will typically be suitable for street use as long as the vehicle is not too heavy.

910-11230 Instructions (PDF) 

Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
Our Techs also Suggest the Following:
Open Base Gasket
Price:
$1.99
EA
In Stock
Item #:
55054
You May Also Be Interested In...
  • Power+Plus Typhoon Small Block Chevy 1957-95 Intake Manifold
    Power+Plus Typhoon Small Block Chevy 1957-95 Intake Manifold
    Price: $149.99 - $299.99
    More Info
    Power+Plus Typhoon Small Block Chevy 1957-95 Intake Manifold
    x 
    							                        
    
                                                        
    If you are running a little more motor, then this is the intake for you! The Professional Products Typhoon manifold is a high performance dual plane, 180° street manifold designed to be used with Holley, Carter AFB, or Edelbrock square flange carbs. For 1957-86 S/B Chevy and will fit 1987-95 heads with supplied adapters.
    • RPM range is 1500-6500
    • Available plain, show polished or chrome
    • Power comparable to single plane manifolds yet retains throttle response/driveability of a dual plane
    • Cast-in nitrous bosses
    • Water outlets at all four corners
    • Dual distributor hold-downs
    • Provisions to add an oil fill tube
    • Accepts late model waterneck, A/C, alternator, and HEI
    910-11265 Dyno Sheet (PDF)
    910-11265 Instructions (PDF) 
  • Power+Plus Typhoon Small Block 302 Ford Intake Manifold
    Power+Plus Typhoon Small Block 302 Ford Intake Manifold
    (1 Rating)
    Price: $179.99 - $345.99
    More Info
    Power+Plus Typhoon Small Block 302 Ford Intake Manifold
    x 
    							                        
    
                                                        
    The Professional Products Typhoon manifold for 260-289-302 small block Ford V8s is a dual plane 180° high-rise design that delivers outstanding street or race performance across a wide power band, while retaining good throttle response at any speed. This dual plane intake accepts square flange carbs.
    • RPM range is 1500-6500
    • Available plain, show polished or chrome
    • Has (1) 1/2" & (3) 3/8" NPT water ports, one at each corner
    • Cast-in nitrous bosses
    • Recommended carburetor is any square bore 600 cfm to 750 cfm
    910-11275 Instructions (PDF) 
  • Power+Plus Typhoon Small Block 351W Ford Manifold
    Power+Plus Typhoon Small Block 351W Ford Manifold
    Price: $199.99 - $369.99
    More Info
    Power+Plus Typhoon Small Block 351W Ford Manifold
    x 
    							                        
    
                                                        
    The Professional Products Typhoon manifold for 351W Fords is the ultimate performance dual plane manifold. Its long runner 180° design provides the best of both worlds - good top end power without sacrificing bottom end torque. Accepts square flange carbs.
    RPM range is 1500-6500. Available plain, show polished or chrome.
    This manifold has features not found in manifolds:
    • Includes a rear water crossover passage 
      • Provides balanced cylinder head temperatures
      • Overall cooler running engine
    • Cast-in bosses for possible addition of direct port nitrous injection  
    910-11235 Instructions (PDF) 
    910-11235 Special Installation Notes (PDF)