No items in Shopping Cart
Polyethylene Fuel Cells are the best cells on the market! This 100% seamless polyethylene cell features one AN8 pick-up fitting and one AN8 vent/tip over valve fitting. These fuel cells contain a pickup tube. All cells are NHRA, IHRA, SCORE, and DIRT approved.
These do not include fuel cell safety foam. If you need foam for the cell Speedway Motors offers it in two sizes 8"x4"x6" and 14"x4"x6" the part #'s are 6007049 and 6007050.
Note: To meet the new 2008 IMCA Sport Compact rules regarding the 8 gal fuel cells, the fuel tank flapper valve # 458-315 shown below must be purchased and used in conjunction with the fuel cell shown here. Or purchase our # 458-2080 with flapper valve already installed.
Get your questions answered by the community. Ask or answer questions below.
what is the width and height
Asked on 3/5/2011 2:55:12 PM by big g from muskogee,ok
This tank is 20" Long, 15" Wide, 8-1/4" Deep.
Answered on 3/8/2011 7:05:26 AM by Jeremy O from Speedway Motors
Aprrox. empty weight?
Asked on 3/12/2011 4:31:28 AM by Striper25 from Stony Creek,NY
This weighs approx. 11.2lbs empty.
Answered on 3/16/2011 1:40:36 AM by Jeremy O from Speedway Motors
Does the tank come with the straps for mounting?
Asked on 5/27/2011 6:01:30 AM by Dropped D150 from Southren ohio
No, the tanks do not include mounting straps. Please consider item 4581208 to use to mount this tank.
Answered on 5/31/2011 1:51:29 AM by Tech Support from Speedway Motors
Does this tank include a sending unit?
Asked on 7/10/2011 2:24:07 AM by Striper25 from Stony Creek,NY
No, you will need to modify for a sending unit.
Answered on 7/11/2011 4:48:18 AM by Jason from Speedway
Do you have a question about this product?