McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Phone

800.979.0122

Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Professional Products 10211 Polished Aluminum Inline Fuel Filter

Specs
Material Type:
Aluminum
Overall Length:
2.40
Sold in Quantity:
Each
Finish:
Polished
Outside Diameter:
1.50
Thread Pitch:
3/8" NPT
Flow Rating:
160 GPH at 7 PSI
MFG. Part #:
10211
Filter Element Type:
Stainless Steel Mesh
Notes
Filters down to 35 microns, screen can be cleaned in solvent and re-used.
Professional Products 10211 Polished Aluminum Inline Fuel Filter

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Highly polished aluminum filter complete with reusable 35 micron stainless steel mesh filter element. Intended for carbureted systems with 8 PSI max pressure. Filter elements can be cleaned in solvent and reused.
  • Designed for low pressure, carbureted systems 
  • Flows 160 gallons per hour at 7 psi
  • 3/8" NPT female threads

Customer Reviews

Rated 4.7 out of 5 by 3 reviewers.
RATING BREAKDOWN
3 reviews
5 Stars
2
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Andy
New England
Product Rating

fuel leak

November 16, 2012
leaked when I installed it. Turns out the problem was with one of the aluminum fittings that was recommended to adapt to AN-6 hose. I used a pipe bushing 3/8 to 1/4 and a steel 1/4 pipe to AN-6 fitting and this corrected the leak.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

David Hancock
Verified Purchaser
Omaha, NE
Product Rating

Great!

November 04, 2011
Looks good, runs good!
Pros:
  • Lightweight
  • Easy To Install
  • Durable
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

J. D.
Springfield MO
Product Rating

Great Product

June 18, 2010
It matches the chrome and stainless parts on my car great and could mount anywhere.
Pros:
  • Matching finish
  • Compact Size
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

1 questions : 1 answers

Can this filter be used as a pre-filter for a diesel engine? The problem I have is that my fuel filter plugs frequently and I would like to prefilter the fuel before it gets to the standard fuel filter. It is a 4 cylinder diesel so the fuel flow should no

1 answers
Denny
August 02, 2011

Can this filter be used as a pre-filter for a diesel engine? The problem I have is that my fuel filter plugs frequently and I would like to prefilter the fuel before it gets to the standard fuel filter. It is a 4 cylinder diesel so the fuel flow should no

Answers

August 03, 2011
John
This filter is mainly designed for carbureted systems but if used for other applications you will need to recognize the pressure limitations of 8 psi. If running before the pump on a suction type line would not be a problem but on the pressure side exceeding the 8 psi it is not recommended. In higher pressure applications you may want to consider 91002335 with a reusable stainless filter element.
Page 1 of 1

You may also be interested in:

Professional Products 10102 Street Rod Fuel Filter
(Part #91011770)
                        

This deluxe fuel filter features a replaceable paper filter, an aluminum painted top and a chrome filter housing. It is 5-3/8" tall by 3-1/4" diameter and has 3/8" NPT inlet and outlet. 

For carbureted systems only. Flows up to 90 GPH @ 7 PSI and filters particles down to 10 microns.

910-11770 Instructions (PDF) 

Blue Straight AN3 Flare Adapter to 1/8 Inch Aluminum Pipe
(Part #6176041)
                        

These straight flare adaptors connect 1/8" pipe to straight -3 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

  • Precision machined to ensure precise thread engagement
  • Lightweight aluminum fitting
  • -3 AN to 1/8" aluminum pipe
  • 37° sealing angle guarantees a positive seal at maximum operating pressures
  • Available in Blue anodized finish for a custom look

Fitting Thread Application Chart (GIF)

Billet Aluminum Fuel Filter
(Part #91011530)
                        Fully polished aluminum, 3/8" O.D. inlet and outlet. (Not for fuel injection.) Replacement bronze element also available.
                    
Straight Chrome Fitting, 1/4 Inch Hose to 1/8 Inch NPT
(Part #91611045)
                        

These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

  • Male pipe threads to hose barb ends
  • 1/4" Hose to 1/8" NPT
  • Straight angle
Professional Products 10215 Polished Aluminum Fuel Filter with Mount
(Part #91011772)
                        Highly polished aluminum filter complete with a 10 micron reusable stainless steel filter element. Intended for carbureted systems with 8 PSI max pressure. Filter elements can be cleaned in solvent and reused. 
  • 3" long x 2" diameter
  • Flows 160 gallons per hour at 7 psi
  • 3/8" NPT female thread inlet/outlet
OTB Gear 6130 Triple Fuel Block Port Finned
(Part #9106130)
                        

This quality aluminum constructed triple port fuel block features 3 outlet ports that are drilled and tapped for standard 1/4" gas line fittings. You can run multiple carbs, or add a fuel pressure gauge.

  • Polished Finish
  • Mount to any flat surface
  • Made in USA
OTB Gear 6136 4-Port Finned Fuel Log
(Part #9106136)
                        

These 4-port finned fuel logs from OTB Gear use all ports to feed carburetors or one for a fuel pressure gauge. The aluminum construction comes polished and is drilled and tapped for standard 1/4" gas line fittings.

  • 4 sturdy mounting tabs
  • 6-1/2" Length
  • Made in USA

 

OTB Gear 6134 3-Port Finned Fuel Log
(Part #9106134)
                        

This 3-port finned fuel log from OTB Gear is drilled and tapped for standard 1/4" gas line fittings. You can use all the ports to feed carburetors, or you can dedicate one for a fuel pressure gauge.

  • Drilled and tapped
  • Requires 1/4" NPT fittings
  • Retro style polished cast aluminum
  • Made in the USA
OTB Gear 6504 Smooth Fuel Filter, Polished, Left-to-Right Fuel Flow
(Part #9106504)
                        

Finally there are fuel filters that are not only functional, but good looking as well! The OTB Gear Smooth Fuel Filter is a permanent washable stainless mesh filter that will last a lifetime! Fuel flows left to right. 

  • Show quality
  • Left to right fuel flow
  • Permanent washable stainless filter 
  • Utilizes compact ORB/AN-6 fittings. 
  • Compact, functional, good looking
  • Smooth Style
OTB Gear 6505 Smooth Fuel Filter, Satin, Right-to-Left Fuel Flow
(Part #9106505)
                        

Finally there are fuel filters that are not only functional, but good looking as well! The OTB Gear smooth fuel filter is a permanent washable stainless mesh filter that will last a lifetime! Fuel flows right to left.  

  • Show quality
  • Right to left fuel flow
  • Permanent washable stainless filter 
  • Utilizes compact ORB/AN-6 fittings 
  • Compact, functional, good looking
  • Smooth Style
  • Made in USA

Specs:

  • Very compact in size, the bowl is 2.4" in diameter
  • Total height and width are 4-1/4" and projection from surface is 3"
  • Inlet and outlet ports utilize ORB/AN-6 fittings to reduce the bulk of hose connections
  • Drilled for 5/16" mounting hardware - (not included)
  • 100 Micron

 

OTB Gear 6503 Grooved Fuel Filter, Satin, Right-to -Left Fuel Flow
(Part #9106503)
                        

OTB Gear 6503 Grooved Fuel Filter is a permanent washable stainless mesh filter, that will last a lifetime! Compact, functional, and good looking. This fuel filter measures 3 inches in length and 4-1/2 inches in height. 

  • Permanent washable stainless filter
  • Utilizes compact ORB/AN-6 fittings
  • Show quality satin finish
  • Right-to-Left Fuel Flow direction
  • 3 inches in length
  • 4-1/4 inches in height
3/8 NPT Male to 5/16 Inch Hose Barb Adapters
(Part #91011774)
                        
This chrome hose barb adapter is 3/8" NPT on one end and accepts 5/16" hose. Sold as a pair.
3/8 NPT Male to 3/8 Inch Hose Barb Adapters
(Part #91011775)
                        This chrome hose barb adapter is 3/8" NPT on one end and accepts 3/8" hose. Sold as a pair.