McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Phone

800.979.0122

Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Professional Products 10215 Polished Aluminum Fuel Filter with Mount

Specs
Centerline of Holes:
1.50
Material Type:
Aluminum
Overall Height:
2.45
Overall Length:
3.00
Sold in Quantity:
Each
Finish:
Polished
Inlet Size:
0.38
Outside Diameter:
2.00
Thread Pitch:
3/8" NPT
Flow Rating:
160 GPH @ 7 PSI
MFG. Part #:
10215
Filter Element Type:
Stainless Steel Mesh
Notes
Intended for "carbureted" systems only. Features (2) cleanable/reusable S.S. screen filters (one coarse pre-filter and one fine 10 microns screen).
Professional Products 10215 Polished Aluminum Fuel Filter with Mount

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Highly polished aluminum filter complete with a 10 micron reusable stainless steel filter element. Intended for carbureted systems with 8 PSI max pressure. Filter elements can be cleaned in solvent and reused.
  • 3" long x 2" diameter
  • Flows 160 gallons per hour at 7 psi
  • 3/8" NPT female thread inlet/outlet

Customer Reviews

Rated 4.6 out of 5 by 5 reviewers.
RATING BREAKDOWN
5 reviews
5 Stars
3
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Jackflash
Chardon,Ohio
Product Rating

excellent product and will use again

June 06, 2010
Building a show streetroadster and this product is kind of detail that judges look for
Pros:
  • Very Good Product
  • VERY SATISFIED
  • Looks Great
  • Easy To Install
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

hot rod vw
Verified Purchaser
hky., nc
Product Rating

Best LOOKING Filter

October 05, 2010
Chrome mounting bracket is fastened to filter using 2 machine screws. Comes off easy when susPending filter on fittings or threads. Can be used like the similar filter without the mounting bracket.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

BOB
Verified Purchaser
WESTMINSTER, COLORADO
Product Rating

RECOMMEND THIS FILTER FOR YOUR PROJECT

May 01, 2011
AGAIN, GREAT QUALITY PRODUCTS[...]. HIGHLY RECOMMENDED.
Pros:
  • Easy To Install
  • Durable
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

CHUCKLES GARAGE[@]
Verified Purchaser
SANTA ROSA, CA
Product Rating

Nice filter for the money.

July 16, 2010
USING THIS IN A 62 FALCON GASSER. NICE FIT AND FINISH, [...]
Pros:
  • Nicely made part Hi Flow
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

J Lindz
Apple Valley, CA
Product Rating

Not a stand alone filter

July 08, 2010
My only complaint is that the NPT threads where not cut deep enough. I had to take apart the filter and re-tap the ends. Otherwise I like the product. Be aware that the filter surface area is quite small, I would not recommend this as your primary filter. I run a dwarf car that is fuel injected and was having problems with some dirt getting past my filter. I now run a standard inline filter between the tank and pump, then this filter between the pump and the injectors. Problem solved.
Pros:
  • Small
  • Easy to mount
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

3 questions : 3 answers

Can you run with as coarse filter only? The specs say this filter comes with coarse filter and also 10 micron screen. Do you know what micron the coarse filter is, and can I run coarse filter only without the 10 micron screen? Would like to use this as pre filter but the 10 micron filtration would be hard on the pump.

1 answers
HotRodBen
Tennessee, USA
February 23, 2013

Can you run with as coarse filter only? The specs say this filter comes with coarse filter and also 10 micron screen. Do you know what micron the coarse filter is, and can I run coarse filter only without the 10 micron screen? Would like to use this as pre filter but the 10 micron filtration would be hard on the pump.

Answers

February 25, 2013
Jason
The coarse filter is 35 micron, using without the 10 micron screen will limit the filters effectiveness. This filter flows 160 gph at 7 psi

Can this filter be put inline before the mechanical fuel pump

1 answers
Tommy
November 11, 2012

Can this filter be put inline before the mechanical fuel pump

Answers

November 12, 2012
Jason
This filter is intended for "carbureted" systems only. Features (2) cleanable/reusable S.S. screen filters (one coarse pre-filter and one fine 10 microns screen). This filter is designed to go before fuel pump

What does the filter weigh?

1 answers
Frankie
Los Angeles, Ca
October 11, 2011

What does the filter weigh?

Answers

October 11, 2011
Jason
This filter weighs about 4/10 of a pound
Page 1 of 1

You may also be interested in:

Professional Products 10102 Street Rod Fuel Filter
(Part #91011770)
                        

This deluxe fuel filter features a replaceable paper filter, an aluminum painted top and a chrome filter housing. It is 5-3/8" tall by 3-1/4" diameter and has 3/8" NPT inlet and outlet. 

For carbureted systems only. Flows up to 90 GPH @ 7 PSI and filters particles down to 10 microns.

910-11770 Instructions (PDF) 

Professional Products 10211 Polished Aluminum Inline Fuel Filter
(Part #91011773)
                        Highly polished aluminum filter complete with reusable 35 micron stainless steel mesh filter element. Intended for carbureted systems with 8 PSI max pressure. Filter elements can be cleaned in solvent and reused. 
  • Designed for low pressure, carbureted systems 
  • Flows 160 gallons per hour at 7 psi
  • 3/8" NPT female threads
Blue Straight AN6 Flare Adapter to 3/8 Inch Aluminum Pipe Fitting
(Part #6176046)
                        

These straight flare adaptors connect 3/8" pipe to straight -6 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

  • Precision machined to ensure precise thread engagement
  • Lightweight aluminum fitting
  • -6 AN to 3/8" aluminum pipe
  • 37° sealing angle guarantees a positive seal at maximum operating pressures
  • Available in Blue anodized finish for a custom look

Fitting Thread Application Chart (GIF)

Straight Socketless Push-On Fitting, 30 Degree Taper, -6 AN to 3/8 NPT
(Part #1061202)
                        

Male push-on style fitting with straight steel AN hose ends in brass.

Socketless Push-On Application Chart (GIF)

Socketless Push-On Assembly (GIF)


Fitting Thread Size Guide (GIF)

NPT Thread Size Chart (GIF)

Billet Aluminum Fuel Filter
(Part #91011530)
                        Fully polished aluminum, 3/8" O.D. inlet and outlet. (Not for fuel injection.) Replacement bronze element also available.
                    
OTB Gear 6130 Triple Fuel Block Port Finned
(Part #9106130)
                        

This quality aluminum constructed triple port fuel block features 3 outlet ports that are drilled and tapped for standard 1/4" gas line fittings. You can run multiple carbs, or add a fuel pressure gauge.

  • Polished Finish
  • Mount to any flat surface
  • Made in USA
OTB Gear 6136 4-Port Finned Fuel Log
(Part #9106136)
                        

These 4-port finned fuel logs from OTB Gear use all ports to feed carburetors or one for a fuel pressure gauge. The aluminum construction comes polished and is drilled and tapped for standard 1/4" gas line fittings.

  • 4 sturdy mounting tabs
  • 6-1/2" Length
  • Made in USA

 

OTB Gear 6134 3-Port Finned Fuel Log
(Part #9106134)
                        

This 3-port finned fuel log from OTB Gear is drilled and tapped for standard 1/4" gas line fittings. You can use all the ports to feed carburetors, or you can dedicate one for a fuel pressure gauge.

  • Drilled and tapped
  • Requires 1/4" NPT fittings
  • Retro style polished cast aluminum
  • Made in the USA
OTB Gear 6504 Smooth Fuel Filter, Polished, Left-to-Right Fuel Flow
(Part #9106504)
                        

Finally there are fuel filters that are not only functional, but good looking as well! The OTB Gear Smooth Fuel Filter is a permanent washable stainless mesh filter that will last a lifetime! Fuel flows left to right. 

  • Show quality
  • Left to right fuel flow
  • Permanent washable stainless filter 
  • Utilizes compact ORB/AN-6 fittings. 
  • Compact, functional, good looking
  • Smooth Style
OTB Gear 6505 Smooth Fuel Filter, Satin, Right-to-Left Fuel Flow
(Part #9106505)
                        

Finally there are fuel filters that are not only functional, but good looking as well! The OTB Gear smooth fuel filter is a permanent washable stainless mesh filter that will last a lifetime! Fuel flows right to left.  

  • Show quality
  • Right to left fuel flow
  • Permanent washable stainless filter 
  • Utilizes compact ORB/AN-6 fittings 
  • Compact, functional, good looking
  • Smooth Style
  • Made in USA

Specs:

  • Very compact in size, the bowl is 2.4" in diameter
  • Total height and width are 4-1/4" and projection from surface is 3"
  • Inlet and outlet ports utilize ORB/AN-6 fittings to reduce the bulk of hose connections
  • Drilled for 5/16" mounting hardware - (not included)
  • 100 Micron

 

OTB Gear 6503 Grooved Fuel Filter, Satin, Right-to -Left Fuel Flow
(Part #9106503)
                        

OTB Gear 6503 Grooved Fuel Filter is a permanent washable stainless mesh filter, that will last a lifetime! Compact, functional, and good looking. This fuel filter measures 3 inches in length and 4-1/2 inches in height. 

  • Permanent washable stainless filter
  • Utilizes compact ORB/AN-6 fittings
  • Show quality satin finish
  • Right-to-Left Fuel Flow direction
  • 3 inches in length
  • 4-1/4 inches in height
3/8 NPT Male to 5/16 Inch Hose Barb Adapters
(Part #91011774)
                        
This chrome hose barb adapter is 3/8" NPT on one end and accepts 5/16" hose. Sold as a pair.
3/8 NPT Male to 3/8 Inch Hose Barb Adapters
(Part #91011775)
                        This chrome hose barb adapter is 3/8" NPT on one end and accepts 3/8" hose. Sold as a pair.