Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

PerTronix 45001 Flame-Thrower II Chrome Coil

Specs
Overall Height:
6.00
Sold in Quantity:
Each
Cap Terminal Style:
Socket / Female
Outside Diameter:
2.125
Resistance:
.60
MFG. Part #:
45001
Secondary Resistance:
10.00
Inductance:
7.2
Maximum Voltage:
45,000
Peak Current:
7.20
Spark Duration:
1.50
Turns Ratio:
108:1
Garage Sale:
No
PerTronix 45001 Flame-Thrower II Chrome Coil
PerTronix 45001 Flame-Thrower II Chrome Coil

Click image to enlarge

Speeday Motors Logo
X
PerTronix 45001 Flame-Thrower II Chrome Coil

Details

Reviews

Q & A

What's in the Box

Flame-Thrower II coils feature a super low 0.6 Ohm primary resistance which make them the ideal coil for Ignitor II ignition systems, Flame-Thrower billet distributors, as well as many other high energy ignitions. Low resistance and improved turns ratio help to produce up to 45,000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy.

These coils are also compatible with most capacitive discharge boxes.

Application

6 Volt application with 0.6 ohm resistance for 8 Cyl engines

12 Volt application with 0.32 - 0.6 ohm resistance for 4, 6, & 8 cylinder engines

You may also be interested in:

Chrome Coil Mounting Bracket
                        These chrome coil mounting brackets fit over stock coils. Adjustable from 2-1/8" to 2-5/16" with slight modification. 
                    
Pertronix 45011 Flame-Thrower II Ignition Coil, 6 Volt, 0.6 Ohm
                        The hotter the spark, the easier your engine will start, and this 45,000 volt coil is just the ticket to a quick start! Has 0.6 ohms of resistance. Black case for a stock look.

6 volt coils can be used with 6 volt point systems. If used with 12 volt point systems, it should have a 1.00 OHM resistor added.
MSD 8203 Blaster 2 Ignition Coil w/ Resistor
                        

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD ignition, the Blaster Coil line is the right choice. Special 100:1 windings, kept cool in an oil filled metal canister, are used to provide maximum build-up of voltage.  The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Can be used with a stock ignition, Blaster Ignition, or MSD 5, 6 or 7 Ignition Control.

The 0.8 ohm ballast resistor must be used with stock points ignition and Mallory Unilite applications. Includes MSD Power Tower top.

  • Improved output coil for stock points or electronic ignitions, Blaster Ignition, or MSD 5, 6, and 7 Series
  • Supplied with two plug wire boots, terminals, and jumper wire
  • 100:1 turns ratio and lower primary resistance produce high voltage output
  • MSD Red metal canister is filled with a premium grade oil for cooling

MSD Blaster 2 Ignition Installation Instructions (PDF)

MSD Rebate (Link)

 

Trans-Dapt 9366 Stand-Up Coil Brackets
                        These stand-up coil brackets fit over stock coils. Chrome.
                    
PerTronix 60104 Flame-Thrower HV Coil, 0.45 Ohm
                        

These high voltage E-core design coils by PerTronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink. These coils are 50 state legal and are available with different resistance values for your application. Flame-Thrower HV .046 ohm coils are also compatible with most capacitive discharge boxes.

  • 0.45 Ohm primary resistance
  • 60,000 volts
  • 50 state legal

 

OTB Gear 6831 Finned Aluminum Coil Mount, Polished
                        

Not only is this finned aluminum coil mount good looking, it actually has some worthwhile features too. Features a standoff mounting rib that allows you to easily clean the backside and the surface behind it. No inaccessible areas to drive you crazy. Mounted with 1/4"-20 drive studs (removable) that can't be mistakenly driven into the side wall of the coil. Cast in aircraft grade A356 aluminum and polished to a very high sheen.

Made in USA.

OTB Gear 6832 Finned Aluminum Coil Mount, Plain
                        

Not only is this finned aluminum coil mount good looking, it actually has some worthwhile features too. Features a standoff mounting rib that allows you to easily clean the backside and the surface behind it. No inaccessible areas to drive you crazy. Mounted with 1/4"-20 drive studs (removable) that can't be mistakenly driven into the side wall of the coil. Cast in aircraft grade A356 aluminum and polished to a very high sheen.

Made in USA.

PerTronix D100701 Chevy Flame-Thrower Distributor
                        

Replace your outdated points, electronic distributor or bulky HEI with this performance proven system. Simply install the distributor in the engine, connect two wires and start it up! Features the reliable and accurate Ignitor II pickup module for maximum performance in a compact package. Compatible with most most CD ignition systems (MSD 6-Series, etc.).

Fits S/B and B/B Chevy V8. For even more performance, consider adding a Flame-Thrower coil for increased spark energy and higher RPM potential. Distributor cannot be used with solid core (wire core) ignition wires.

  • CNC machined 6061-T6 billet aluminum housings offer maximum strength
  • Housing is hand polished and buffed to a high luster
  • Tempered distributor shaft for accurate timing and extended operational life
  • Upper ball bearing and extra long oil impregnated bronze lower bushing provide high RPM stability
  • Ignitor II module with adaptive dwell maintains peak energy throughout the RPM range
  • Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution
  • Adjustable mechanical advance with proprietary limiting function permits multiple settings
  • Factory set with a performance advance curve
  • Additional springs for custom advance curves are provided
  • High dielectric strength cap and rotor with brass terminals and contact

447-10070 Instructions (PDF)

Chrome Coil Bracket and Cover
                        These ignition coil brackets and covers fit over stock coils. Chrome.
                    
MSD 8213 Coil Bracket
                        

The MSD Coil Bracket offers easy, univer­sal mounting for standard size ignition coils up to 2-1/4" in diameter. The Bracket uses a bolt and nut combination instead of the easily stripped self-tapping screw common on other brand brackets.  Perfect for cannister type coils

Adustable from 1-3/4" to 2-3/8" with slight bending of mounting tabs.

MSD Rebate (Link)