Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Painless Wiring 80174 Pressure Brake Switch with Pigtail, 1/8 NPT

SAME DAY SHIPPING!

Share by Email

From
To

Click image to enlarge

Watch the video below to learn more about the differences in brake lines, flare types and fittings you may want to consider before plumbing away on your current chassis project.

X

Details

Reviews

Q & A

What's in the Box

Pressure brake switch has 1/8" male NPT threads. For inline installation of this switch, use one of the corresponding tee fittings. This is a standard normally open switch that closes when actuated, at 60-100 psi.

You may also be interested in:

Pressure Brake Switch, 1/8 NPT
                        

Pressure brake switch has 1/8" male NPT threads. For inline installation of this switch, use one of the corresponding tee fittings. This is a standard normally open switch that closes when actuated, at 60-100 psi.

Universal Mechanical Brake Light Switch
                        

Our mechanical brake light switch is "closed" in the at rest position. It breaks the circuit when pushed. Mounts near your brake pedal and the arm can be bent as needed. 42 amp max rating.

Use for your street rod, truck, or muscle car!

Brake Light Switch with 3/8 Inch IFM Adapter Fitting
                        

This brake light switch has a 3/8"-24 IFM thread so you can screw it right into an inverted flare brake fitting.

  • Designed to be installed into a 3/8"-24 inverted flare female fitting
  • Switch has two 1/4" wide male spade terminals
  • 3/8"-24 IFM thread adapter included
NOTE:   If using residual valves in conjunction with this switch, we recommend installing the switch in-line before the residual valves.
3/8 Inch-24 IFF Each End, 1/8 Inch NPT Female Center, Brass Adapter Tee
                        IFF TEE male and female adapters
                    
Stainless Steel AN3 to AN3 Tee, 1/8 Inch NPT Female
                        TEE male and female adapters.