Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Orange Thermal Sleeve

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Sold in Quantity:
Each
Temp. Range:
500°F continuous, 2000°F short duration
Overall Length:
12.00
Inside Diameter:
-
Notes
Silicone coated fiberglass.
Orange Thermal Sleeve

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Looking for a durable way to protect your hoses or wires from excessive heat? If so, this thermal sleeve is sure bet. It features a soft knitted fiberglass interior that won't chafe which is coated with a thick layer of silicone. When combined, the materials will withstand 500°F of continuous heat, or 2000°F for a short duration. The sleeving is even designed to shed sparks while resisting hydraulic fluids and lubricating oil. Exposure to open flames will char the silicone coating but won't scorch the fiberglass inner layer.

Great for electrical wires, cables and fluid lines. Available in 3/4", 1" & 2" I.D. sizes and each is sold by the foot.

Customer Reviews

This product has no reviews.

Product Q&A

1 questions : 1 answers

1 answers

how long are these sleeves? do they bend? can they be cut?

AZ
March 09, 2012

how long are these sleeves? do they bend? can they be cut?

Answers

March 12, 2012
Eric
The Thermal Sleeve is sold by the foot. Yes these sleeves are flexible and are easily cut.
Page 1 of 1

You may also be interested in:

Thermo-Sleeve for Hoses and Wires, 1 Inch x 3 Feet
(Part #70414010)
                        Using Thermo-Sleeve will provide your wires and  hoses with protection from both radiant and conductive heat. The  aluminized sleeving reflects over 90 percent of heat, while the inner  material is fireproof and resistant to oil. Combined, the  high-temperature fabric and reflective foil skin provide the protection  you need in today's high-performance applications. 
  • 36" length
  • Fits 5/8" - 1" diameter
  • 2,000º F max temp
  • Slip-on installation
  • Fireproof & oil resistant
  • Tough silver Mylar finish
Thermo-Sleeve for Hoses and Wires, 1/2 Inch x 3 Feet
(Part #70414030)
                        Using Thermo-Sleeve will provide your wires and  hoses with protection from both radiant and conductive heat. The  aluminized sleeving reflects over 90 percent of heat, while the inner  material is fireproof and resistant to oil. Combined, the  high-temperature fabric and reflective foil skin provide the protection  you need in today's high-performance applications. 
  • 36" length
  • Fits 1/2" - 1" diameter
  • 2,000º F max temp
  • Wrap-around installation
  • Easy hook and loop closure
  • Fireproof & oil resistant
  • Tough silver Mylar foil can be effective with radiant heat up to 2,000º F and 400º F for conductive heat
Thermo-Sleeve for Hoses and Wires, 1-1/2 Inch x 3 Feet
(Part #70414035)
                        Using Thermo-Sleeve will provide your wires and  hoses with protection from both radiant and conductive heat. The  aluminized sleeving reflects over 90 percent of heat, while the inner  material is fireproof and resistant to oil. Combined, the  high-temperature fabric and reflective foil skin provide the protection  you need in today's high-performance applications. 
  • 36" length
  • Fits 1/4" - 1/2" diameter
  • 2,000º F max temp
  • Slip-on installation
  • Fireproof & oil resistant
  • Tough silver Mylar foil can be effective with radiant heat up to 2,000º F and 400º F for conductive heat
DEi 010403 Heat Sheath Aluminized Line Sleeving, 3/4 Diameter x 3 Ft.
(Part #35610403)
                        

Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F.

  • Pliable for tight bends
  • Capable of withstanding 500°F direct / 2000°F radiant heat
  • Five popular diameters to choose from
  • Trim to desired length

Heat Sheath Frequently Asked Questions (PDF)

DEi 010405 Heat Shroud Velco Aluminized Line Sleeving, 1 x 36 Inch
(Part #35610405)
                        

These heat shrouds from DEi are made from a high temperature rated glass fiber fabric with an alumized out facing. These heat shrouds are the same as Heat Sheath but with the added convenience of hook and loop closure design on the edges. You won't need to remove one end of the connected wires, cables and hoses. You will simply wrap the head shroud around whatever you need protected and close the edges.

  • 1/2" to 1-1/4" ID x 3 feet
  • Convenient hook & loop designed edges
  • No need to remove wires and hoses
  • Withstands 500 degree F direct or continuous 2000 degree F radiat head
  • Easily trimmable to length
  • Fireproof
DEi 010418 Heat Sheath Sewn Aluminized Line Sleeving, 1/2 x 36 Inch
(Part #35610418)
                        

Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F.

  • Pliable for tight bends
  • Capable of withstanding 500°F direct / 2000°F radiant heat
  • Five popular diameters to choose from
  • Trim to desired length

Heat Sheath Frequently Asked Questions (PDF)

DEi 010419 Heat Sheath Sewn Aluminized Line Sleeving, 1 Inch x 3 Ft.
(Part #35610419)
                        

Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F.

  • Pliable for tight bends
  • Capable of withstanding 500°F direct / 2000°F radiant heat
  • Five popular diameters to choose from
  • Trim to desired length

Heat Sheath Frequently Asked Questions (PDF)

Earls 730006ERL 3/8 Inch ID Flame Guard Insulation, Sold by the Foot
(Part #425730006ERL)
                        

It is often necessary to insulate hoses (or cables) from extreme heat sources. Earl's non-asbestos flame guard is a very efficient insulating sleeve for hose assemblies. Color: Brick Red

  • Insulated From Extreme Heat
  • Non-Asbestos Flame Guard
  • Efficient Insulating Sleeve
  • For Hose Assemblies
  • Brick Red Color
  • Sold per foot
Earls 730008ERL 1/2 Inch ID Flame Guard Insulation, Sold by the Foot
(Part #425730008ERL)
                        

It is often necessary to insulate hoses (or cables) from extreme heat sources. Earl's non-asbestos flame guard is a very efficient insulating sleeve for hose assemblies. Color: Brick Red

  • Insulated From Extreme Heat
  • Non-Asbestos Flame Guard
  • Efficient Insulating Sleeve
  • For Hose Assemblies
  • Brick Red Color
  • Sold per foot
Earls 730010ERL 3/4 Inch ID Flame Guard Insulation, Sold by the Foot
(Part #425730010ERL)
                        

It is often necessary to insulate hoses (or cables) from extreme heat sources. Earl's non-asbestos flame guard is a very efficient insulating sleeve for hose assemblies. Color: Brick Red

  • Insulated From Extreme Heat
  • Non-Asbestos Flame Guard
  • Efficient Insulating Sleeve
  • For Hose Assemblies
  • Brick Red Color
  • Sold per foot
Earls 730012ERL 1 Inch ID Flame Guard Insulation, Sold by the Foot
(Part #425730012ERL)
                        

It is often necessary to insulate hoses (or cables) from extreme heat sources. Earl's non-asbestos flame guard is a very efficient insulating sleeve for hose assemblies. Color: Brick Red

  • Insulated From Extreme Heat
  • Non-Asbestos Flame Guard
  • Efficient Insulating Sleeve
  • For Hose Assemblies
  • Brick Red Color
  • Sold per foot
Earls 730014ERL 1-1/4 Inch ID Flame Guard Insulation, Sold by the Foot
(Part #425730014ERL)
                        

It is often necessary to insulate hoses (or cables) from extreme heat sources. Earl's non-asbestos flame guard is a very efficient insulating sleeve for hose assemblies. Color: Brick Red

  • Insulated From Extreme Heat
  • Non-Asbestos Flame Guard
  • Efficient Insulating Sleeve
  • For Hose Assemblies
  • Brick Red Color
  • Sold per foot
Earls 730016ERL 1-1/2 Inch ID Flame Guard Insulation, Sold by the Foot
(Part #425730016ERL)
                        

It is often necessary to insulate hoses (or cables) from extreme heat sources. Earl's non-asbestos flame guard is a very efficient insulating sleeve for hose assemblies. Color: Brick Red

  • Insulated From Extreme Heat
  • Non-Asbestos Flame Guard
  • Efficient Insulating Sleeve
  • For Hose Assemblies
  • Brick Red Color
  • Sold per foot
Earls 730606ERL 3/8 Inch ID 6 Foot Long Flame Guard Insulation
(Part #425730606ERL)
                        

It is often necessary to insulate hoses (or cables) from extreme heat sources. Earl's non-asbestos flame guard is a very efficient insulating sleeve for hose assemblies. It is made under a special process form a silicone rubber outer and braided glass inner sleeve bonded to the rubber. Color: Brick Red

  • Insulated From Extreme Heat
  • Non-Asbestos Flame Guard
  • Efficient Insulating Sleeve
  • For Hose Assemblies
  • Brick Red Color
  • Sold as 6FT/1.8M pc.