Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image

Mustang II Power and Manual Rack & Pinions

Price: $149.99 - $199.99
Item #:
91034340
Mustang II Power and Manual Rack & Pinions
Click image to enlarge Click image to enlarge
  • Mustang II Power and Manual Rack & Pinions
  • Mustang II Power and Manual Rack & Pinions
  • Mustang II Power and Manual Rack & Pinions
  • Mustang II Power and Manual Rack & Pinions
No video at this time.
 
Fits aftermarket Mustang II crossmembers. Available in manual or power steering. Mount bushings are included with the Power version, but mount bushings are NOT included in the Manual version.

MANUAL: New manual rack and pinion steering assembly for Pinto/Bobcat/Mustang II based front suspensions in street rods and kit cars. 9/16"-26 spline input shaft. 16" mount centers. 

POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. Bushings included. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

91034340 CPP Instructions (PDF)  

  • 91034340-MAN
    Overall Length
    45.000"
    Tube O.D.
    1.420"
    Center to Center
    16.000"
    Turns Lock to Lock
    3.500
    Spline End
    9/16-18
    Sold in Quantity
    Each
    Notes
    Pivot point center to center is 24.50" This rack has raw aluminum and casting and a steel center tube. Mount bushings are NOT included. Tie rod end threads are 9/16-18
  • 91034340-POW
    Overall Length
    45.125" (45 1/8")
    Tube O.D.
    2.000"
    Center to Center
    15.500" (15 1/2")
    Travel
    5.875" (5 7/8")
    Turns Lock to Lock
    2.500
    Spline End
    3/4"-36
    Sold in Quantity
    Each
    Notes
    Uses 16mm o-ring outlet and 14mm o-ring for high pressure inlet. This can be used with standard GM steering pumps.
  1. The Power Steering unit has 14mm and 16mm O-ring style ports. If you have an inverted flare fitting on your existing lines, that will not work.
  2. The Power Steering unit can be used with our standard GM pumps 91032922-GM, 91032908-BLK & -CHR, and with hose kits 910-32535 and 617-4835.
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Our Techs also Suggest the Following:
Rack & Pinion Mounting Bushing
Price:
$8.99
EA
In Stock
Item #:
Item Details:
Sold individually - (2) needed per rack
Inner Tie Rod Extention Kit - Speedway Mustang II Manual Rack
Price:
$39.99
ST
In Stock
Item #:
Item Details:
2.645" overall length
25mm x 1.25 thread size
1-3/8" wrench size
Mustang II Manual Rack Bolt Kit
Price:
$10.00
PR
Sale Price:
$6.99
In Stock
Item #:
You May Also Be Interested In...
  • (5 Ratings)
    Price: $129.99
    More Info
    Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    x
    							                        

    These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.

    The kit includes:

    • (2) 24" stainless steel braided hoses with 90° ends installed (rack end)
    • (1) Banjo bolt assembly for the pressure connection to the pump with 5/8" or 16mm threads
    • (1) Custom clamp cover for the return hose which connects to a hose nipple on the pump
    • Rack fittings in this kit are one each, 16mm or 5/8"-18, and one each, 14mm or 9/16"-18

    617-4835 Instructions (PDF) 

  • (4 Ratings)
    Price: $13.99
    More Info
    Mustang II Outer Tie Rod End
    x
    							                        

    Outer tie rod and inner extension fits left or right, attaches steering rack to spindles. Fits both manual Mustang II and 1982-1988 T-Bird power racks.

    • .562 x 18 female thread
    • 3.40" long from stud centerline to end

  • (3 Ratings)
    Price: $14.99
    More Info
    -6 AN O-Ring Fittings for 1982-88 T-Bird Power Rack & Pinion
    x
    							                        

    These fittings are for our 910-34340-POW '82-'88 Thunderbird power steering rack only. Pressure fitting is 14mm O-ring to -6AN. Return fitting is 16mm O-ring to -6 AN.

  • Price: $39.99
    More Info
    Inner Tie Rod Extention Kit - Speedway Mustang II Manual Rack
    x
    							                        

    Inner tie rod extensions for Speedway manual racks. Includes boots and bands.

    910-34346 Instructions (pdf)

  • Price: $9.99
    More Info
    Mustang II Power Rack Bolt Kit
    x
    							                        

    • (2) 5/8"-11 x 4-1/2" coarse hex cap screw Grade 5
    • (2) 9/16" hardened flat washers
    • (2) 5/8"-11 nyloc nuts
    • (1) Instruction sheet

  • (1 Rating)
    Price: $7.99
    More Info
    Power Steering Fitting, -6 AN to 1/2 Inch-20 O-Ring
    x
    							                        

    These steel fittings have a straight thread with o-ring on one side and the common AN6 on the other. Common to Ford rack and pinion and others.

  • Price: $6.99
    More Info
    Mustang II Rack Spacer, 3/4 Inch
    x
    							                        

    This 3/4" thick spacer works with Mustang II and '82-'88 T-Bird rack & pinions.

  • (1 Rating)
    Price: $179.99
    More Info
    Chrome Mustang II Manual Rack & Pinion
    x
    							                        

    New manual rack and pinion steering assembly for Pinto/Bobcat/Mustang II based front suspensions in street rods and kit cars. Has a 9/16" 26-spline input shaft. 16" mount centers.

    Fits aftermarket Mustang II crossmembers.

  • (3 Ratings)
    Price: $29.99
    More Info
    T-Bird Offset Rack & Pinion Mount Bushings
    x
    							                        

    Allows the installation of a T-Bird rack & pinion with 15-1/2" center to center mounts to a crossmember built for a Mustang II with a 16" center to center mounting.

    NOTE: These bushings are not designed to raise or lower the rack & pinion.

  • Price: $159.99
    Sale Price: $149.99
    6% off
    More Info
    Mustang II Rack-SAE Thread
    x
    							                        

    NEW Mustang II Universal Manual Rack & Pinion. Featuring quality aluminum casting with chrome plated steel center tube. SAE threads will NOT accept rack extensions.

    • 16" mount center to center
    • All NEW components not remanufactured
    • Includes jam nuts
    • 9/16"-18 Tie Rod End threads
    • 9/16" - 26 Spline input