Mustang II Extended-Length Outer Tie Rod End
Click image to enlarge
Q & A
What's in the Box
Outer tie rod fits left or right, attaches steering rack to spindles. Fits both manual Mustang II and 1982-1988 T-Bird power racks. Measures 1.5" longer than stock outer tie rod end.
Item Details5-1/8" (5.149) from center of stud to the end
You may also be interested in:
Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose KitMore Info
Mustang II Outer Tie Rod End, Manual VersionMore Info
Power Steering Fitting, -6 AN to 1/2 Inch-20 O-RingMore Info
9/16 Inch Fine Thread Tie Rod NutsPrice: $0.99More Info
Speedway Mustang II/T-Bird 2 Inner Tie Rod Extension, Power VersionMore Info
Pro-Blend 1720 Anti-Seize CompoundMore Info
These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.
The kit includes:
- (2) 24" stainless steel braided hoses with 90° ends installed (rack end)
- (1) Banjo bolt assembly for the pressure connection to the pump with 5/8" or 16mm threads
- (1) Custom clamp cover for the return hose which connects to a hose nipple on the pump
- Rack fittings in this kit are one each, 16mm or 5/8"-18, and one each, 14mm or 9/16"-18
617-4835 Instructions (PDF)
Outer tie rod and inner extension fits left or right, attaches steering rack to spindles. Fits both manual Mustang II and 1982-1988 T-Bird power racks.
- 9/16"-18 R/H female thread
- 3.40" long from stud centerline to end
These steel fittings have a straight thread with o-ring on one side and the common AN6 on the other. Common to Ford rack and pinion and others.
Hex head 9/16"-18 fine thread nuts for use with Mustang II rack & pinion tie rod ends.
Sold in pairs.
Inner tie rod extensions for Mustang II/Thunderbird-style steering racks. Includes boots and bands. These inner tie rod extensions fit between the inner shaft of the rack and the pivot where the tie rod attaches. It moves the pivot out to align with the pivot on the lower control arm or the imaginary line between the upper pivot and the lower control arm pivot. In doing so it leaves the tie rod in plane with the lower control arm and preserves correct steering geometry.
The manual version does NOT have the holes for roll pins and Loctite is recommended. The power version is similar to the OEM and has 3 holes and include drift or roll pins for retention.
Manual version (MAN) fits
- Flaming River manual racks
- Maval manual racks
Power version (POW) fits
- Mustang II power racks
- 1982-88 Thunderbird power racks
Apply Pro-Blend anti-seize directly to any metal surface that may gall or seize due to heat, pressure, torque loading or shock. Excellent in environments of gas, alcohol, water, solvents, dirt, sand, and grit.
- Defies contact of dissimilar or like metals
- Not affected by heat, moisture, salt water, or corrosion
Learn why using anti-seize is so important in our tech article, Installing New Hardware.