Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Moroso 74050 Sealed Battery Box

Moroso 74050 Sealed Battery Box
Moroso 74050 Sealed Battery Box

Click image to enlarge

Please NOTE the following about this product:

  • This product is discontinued.

Details

Reviews

Q & A

What's in the Box

Moroso's sealed plastic box is ideal for relocating a battery to the rear of any race, street or show vehicle with or without a rear firewall.
  • Holds a Series 21, 24, 26, 34, 42, 54, 55, 56, 61, 62, 63, 85, 86 and 96R battery with either top-post or side-post terminals
  • Outside Dimensions: 13-1/8" W, 11-1/8" D, 11-1/8" T
  • Fully approved for racing by NHRA, IHRA and SCCA
  • Includes all mounting hardware, rubber cable clamps and grommets
  • Air-tight lid is sealed with closed-cell foam gaskets to prevent battery gasses from entering vehicle
  • Injection molded polyethylene resists battery acid
  • Convenient quick-lock fasteners accessed from top, eliminating the need to reach under in tight spaces to secure nut
  • Vent tube carries battery gasses outside of vehicle
  • 3/8" steel hold-down rods keep battery secure 
545-74050 Instructions (PDF)

You may also be interested in:

Remote Battery Terminals
(Part #69821504)
                        

Remote battery terminals allow fast, convenient charging of the battery between races. Sold as a pair.

Requires a 1.270" hole for mounting. Threaded stud is 3/8".

JAZ Products Sealed Plastic Battery Box
(Part #458700)
                        Available in red or black. These battery boxes include mounting and hold down hardware, cable grommets and vent hose. This product is NHRA, IHRA, and SCCA approved.

458-700 Instuctions (PDF)

Aluminum Battery Box for Braille and Odyssey
(Part #95052083)
                        

Lightweight and easy to access. This battery box will save you weight and frustration. Fits Braille 2015, 2015C, as well as Odyssey PC545 batteries. Use with accessory clamps to mount on the chassis.

Box measures 7.5” x 4” x 4.5”

Longacre 48115 Deluxe Racing Battery Cable Kit
(Part #47548115)
                        These kits are perfect for high output racing applications but will work with just about anything. They are designed for use with top post battery terminals and come complete with disconnect switch and heavy duty ground cable.  Installer must cut cable to desired lengths and then solder on the terminal ends provided.
  • 133 strand 1/0 pre-cut cables for entire system
  • Ends are factory soldered for a quick, simple installation
  • Includes solenoid and battery disconnect switch with panel
  • Starter cable is heat protected with Firebraid
  • Includes heavy duty 14" ground strap and all cables from battery to switch
  • Battery cable provided is 12.5 ft in length
Moroso 74100 Battery Disconnect Switch
(Part #54574100)
                        

This battery disconnect switch from Moroso Performance is easy to install and is required by many sanctioning bodies. With a quick twist of the non-slip handle shuts off all electrical current to the electrical fuel pump, electric water pump, and ignition.

  • Easy to install Disconnect Switch required by many sanctioning bodies
  • A quick twist of the non-slip handle shuts off all electrical current to the electric fuel pump, electric water pump, ignition, instruments, etc.
  • For drag racing vehicles, the switch should be mounted on the vehicle's rear panel for easy accessibility
  • Use Push/Pull Switch Kit No 74105 for remote installation
  • 2-3/8" Studs included
  • Drag Race applications without alternators
  • Rating: 125 amps @ 6-36 volts DC

Assembly Instructions (PDF)

 

 

Moroso 74101 Battery Disconnect Switch, Heavy Duty
(Part #54574101)
                        This easy to install disconnect switch from Moroso Performance is required by many sanctioning bodies. A quick twist of the non-slip handle shuts off all electrical current to the electric fuel pump, electric water pump, ignition, instruments, etc.
  • For drag racing vehicles, the switch should be mounted on the vehicle's rear panel for easy accessibility
  • In street applications, the switch can be hidden to thwart car thieves
  • Use Push/Pull Switch Kit No 74105 for remote installation
  • Multiple battery applications
  • Rating: 175 amps @ 6-36 volts DC
  • 2-3/8" Studs included

Assembly Instructions (PDF)

Note: For oval track and road racing applications, the switch should be mounted so that it can easily be reached by the driver or service personnel from outside the vehicle.

Moroso 74102 Battery Disconnect Switch, Super-Duty
(Part #54574102)
                        

This battery disconnect switch has a rating of 2000 amps intermittent and 300 amps continuous. It is perfect for engines with large starter draws, RVs, Drag cars with alternators, and other applications (20 amps on small terminals).

  • Two pairs of copper studs (1/2" -20 & 10 -32) make it ideal for disconnecting alternator (or other electrical device) in addition to the battery
  • Sealed shaft keeps out moisture and debris
  • Indexing pin aligns switch with mounting panel and prevents rotation; fits mounting panels up to 1/4" thick
  • Includes switch position face plate; also includes decal to indicate switch location during emergencies
  • Sold Individually

Assembly Instructions (PDF)

Moroso 74103 Battery Terminal Disconnect Switch, Top Terminal
(Part #54574103)
                        One turn of this knob from Moroso Performance disconnects the battery and saves the solid state voltage regulator and alternator when charging. This product is sold individually.
  • Deters possible car thieves when parked
  • Switch is rated at 100 amps for 12 or 24 DC use
  • Sold Individually

Assembly Instructions (PDF)